Professional Documents
Culture Documents
Following commands to be written on the terminal 1.Csh 2. Source /home/software/cshrc/ams.cshrc 3.da_ic &
Go to library on the open palette and chose the appropriate nmos/pmos from device library
Complete the circuit by using appropriate elements from the source and generic library.
Click the simulation palette and go to lib/temp/inc to choose the 0.35u model file.
Go to analysis tab on the right and make the settings for transient analysis
Select the nodes at which output is to be observed in wave outputs tab and observe the waves via ezwaves on the left hand side panel.
Schematic layout
Working on 0.35u technology means that the channel length of the MOS=0.35u
NOTE: to observe perfect square wave shaped pulse the rise and fall times=0.001ns