Professional Documents
Culture Documents
Moshell Notes - How To
Moshell Notes - How To
To check pm counters for E1 In RXI pr atmport=ms-x-y get <proxy> lpget Subrack=MS,Slot=x,PlugInUnit=1,Etm1=1,E1PhysPathTerm=ppy To check E1-MS port in RXI (add E1 for RBS) In RNC st <sitename> get <proxy> iub In RXI pr .<iub> eg. pr .0095 lk <proxy> st atmport=ms-x-y bl lget ms-2-2 (then check iub number with STR printout see tally or not) reservedBy Aal2PathVccTp=b0001a2 <----- iub # = 0001 In RBS (when port is ready but E1 not pull through yet so that no alarm) pr atmport get <proxy> ie. get 1345 lget Subrack=1,Slot=2,PlugInUnit=1,Etm1=1,E1PhysPathTerm=pp2
set <proxy> administrativeState 0 (to lock the 2nd physical port) set 194 administrativeState 0 (to lock the 2nd physical port)
To remove Utrancell & IubLink in RNC lst <utrancell> lst singmu ldel <utrancell> lst .b<iub-no> ldel .<iub-no> eg. lst raza
eg. lst .b0095 (WARNING : Check other proxys) (WARNING : Exclude other proxys)
RNCTGEM01> lst .b14 Around 12 MOs for IUB (1E1) 060105-12:32:30 ====================================================================== ============= Proxy Adm State Op. State MO ====================================================================== ============= 3517 1 (ENABLED) TransportNetwork=1,AtmCrossConnection=b14ib 3518 1 (ENABLED) TransportNetwork=1,AtmCrossConnection=b14ia 3586 0 (DISABLED) TransportNetwork=1,Aal5TpVccTp=b14db 3587 0 (DISABLED) TransportNetwork=1,Aal5TpVccTp=b14da 3590 0 (DISABLED) TransportNetwork=1,Aal5TpVccTp=b14cb 3591 0 (DISABLED) TransportNetwork=1,Aal5TpVccTp=b14ca 3751 0 (DISABLED) TransportNetwork=1,Aal0TpVccTp=b14sb1 3761 0 (DISABLED) TransportNetwork=1,Aal0TpVccTp=b14sa1 4314 0 (DISABLED) TransportNetwork=1,UniSaalTp=b14db 4316 0 (DISABLED) TransportNetwork=1,UniSaalTp=b14da 4319 0 (DISABLED) TransportNetwork=1,UniSaalTp=b14cb 4320 0 (DISABLED) TransportNetwork=1,UniSaalTp=b14ca ====================================================================== ============= Total: 12 MOs
lst .vc<iub-no> ldel .vc<iub-no> RNCTGEM01> lst .vc14 Around 10 MOs for IUB (1E1)
eg. lst .vc95 (WARNING : Check other proxys) (WARNING : Exclude other proxys)
060105-12:30:49 ====================================================================== ============= Proxy Adm State Op. State MO ====================================================================== ============= 2972 1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1437 2973 1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1436 2974 1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1435 2975 1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1434 2976 1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1432 3978 1 (ENABLED) TransportNetwork=1,AtmPort=MS-7-1,VplTp=vp1,VpcTp=1,VclTp=vc1432 4187 1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=vp1,VpcTp=1,VclTp=vc1432 4484 1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc1444 4485 1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc1443 4487 1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc1433 ====================================================================== ============= Total: 10 MOs
From RNCs delete external utran relations lpr utranrelation=<sitename> ldel utranrelation=<sitename>
To remove rbs in RXI pr .b<iub-no> lk <proxy> pr aal2routingcase 6012200500<rncid><iub-no> del <proxy> lst .b<iub-no> ldel .b<iub-no> lpr atmport=ms-18-1 lget atmport=ms-18-1 del <proxydown>-<proxytop-1> del AtmPort=MS-20-1-* lst Slot=18.*Vc12Ttp=1 lpr vc<iub> ldel vc<iub> eg. lst .b0095
(to delete the whole 63 ports of the ETMC41) or to block all ports :
eg. lpr vc95 eg. ldel vc95 (WARNING : Exclude other VCs)
To remove rbs in ATMCC lst .b<iub-no> ldel .b<iub-no> lpr vc<iub> ldel vc<iub> eg. lst .b0095 eg. lpr vc95 eg. ldel vc95 (WARNING : Exclude other VCs)
To check pm (performance) counters in RNC/RXI get 1 ls -l /p001200/pm/ | grep xml (to see the performance directory) (to see the performance files)
(list the scanners, status) (get performance report) [for the last 5 hours + 3 ]
To create performance counters scanner pst pgetsn <proxy> pcr <name> <mo-name> <counter-name> pget <mo-name> <counter-name> pbl/pdeb <proxy> pdel <proxy>
eg. pcr <rssi> cellcarrier pmAverageRssi to read the counters to stop/resume scanner to delete scanner
To set SAC in Utrancell pr utrancell=ower serviceAreaRef (then) get utrancell=ower serviceAreaRef set utrancell=AMGMMU servicearearef LocationArea=1,servicearea=12 (SAC defined)
To set Electrical Tilt (RET) pr retdevice get <proxy> set <proxy> electricalAntennaTilt <value> get ret electrical
Sample Scripts in moshell for 10 Enter commmands (one per line), then type "done" > get radiolink num > wait 2 > done To enable E1 supervision set
To create Group (eg. Not reserved VclTp) get vcltp reservedby !.*= lma <group-name> vcltp reservedby !.*=
To check RBS MO In RBS st plug cabx cab (AuxPlugInUnit=2 is the RET, AuxPlugInUnit=1 is the ASC) (without the external parts)
To change PSC ( In RNC st plug cabx cab (AuxPlugInUnit=2 is the RET, AuxPlugInUnit=1 is the ASC) (without the external parts)
To change SAC (Service Area Code) In RNC Pr cell Get proxy Get set utrancell=KCC1BU servicearearef LocationArea=1,servicearea=284
To change maxtxpowerdl for specific cell (usually to clear CONGESTION alarms) In RNC get CUV1BU_1 maxtxpowerdl --> in EMAS, click Utrancell, Properties, Cell (PCIPCH in Common Channel) set CUV1BU_1 maxtxpowerdl 402 maxtxpowerdl value stated as x10dBm (actual = 0.1x) maxtxpowerdl value usually 0.4 dBm lesser than maxDlPowerCapability (from RBS) thus if maxDlPowerCapability 422, maxtxpowerdl 418 (422 4) in P3 - get SOGXBU_1 maximumtransmissionpower
To lock/unlock cells In RNC st utrancell=sunwmu lst sunw lbl sunw (to lock cell & channels) bl sunw (to lock cell only) deb sunw (to unlock)
To check network clock synchronisation In RNC & RBS Read clock (GMT +8) ntpconfig info Check which OMNIFSERVER the node is connected to (i.e ntpServerAddressPrimary) from get 1
To check atmport & pp (physical port) In RBS lpr atmport vc32&33 for signaling lpget 1007 (vc proxy) to see number of ATM traffic cells transferred get atmport=1-2-2 then : lget Subrack=1,Slot=2,PlugInUnit=1,Etm1=1,E1PhysPathTerm=pp2 to un/lock have to set values 1 or 0
To administer state of Mos In RBS St plug Deb proxy Bl proxy No need to use set 1 or set 0 (only for physical ports) otherwise use deb & bl
To autocreateCV In RNC & RBS Get config Cv ls (2 CVs will be used for the autocreate CV function) Set proxy autoCreatedCVIsTurnedOn true/false Set timeForAutoCreatedCV (UTC time) Set timeForAutoCreatedCV 13:00 (cv autocreated at 9pm)
To check SAC corruption In RNC tg | grep -i kcc1bu lh mod1 cell get 1/1/1/1/2/1.44 cellData lookout for , sac int 10 } which states a wrong SAC value for the Utrancell get utrancell=kcc1bu cid (cid = SAC + sector number) get serviceArea=284 to confirm SAC for the cell
To restart Node In RNC,RXI & RBS acc 0 restart poll (to wait 20seconds until node comes up again)
To create CV In RNC,RXI & RBS cvms CXP9010373%1_R11G_050725_1516 emfauzi change_ntpserver_ip cvms CXP9010373%1_R11G_050725_1516 followed by comments for the CV cvset CXP9010373%1_R11G -- to set the CV startable
To change LAC (Location Area Code) In RNC get servicearea=132 get locationarea get routingarea get externalutrancell LAC --> corresponding LAC changed at neighbour RNC (if defined) set ExternalUtranCell=uefaMU_1 lac 12050 -->to change the externalutrancell LAC parameter for the particular cell at another/neighbour RNC get utrancell=uefa lac --> to view externalutrancell LAC parameter at neighbour RNC get utrancell=cinoMU_3
To restart node In RNC & node B acc 0 restart pol - to get moshell connected once node has restarted
To check plugin status In RNC & node B st plugin st plugin 1 0 st plugin 0 1 lst plug 0
To enter Moshell with security enabled In RNC & node B moshell -c host.p12 10.78.37.225
To block sectors via Moshell In RNC St blip Bl the proxy Deb the proxy (can have multiple proxies for more cells)
To view delay & attenuation parameters within a sector In RBS Get jumper Get feeder Get rbs xdl
To delete something already done with a script In RNC/RXI/RBS First you have to generate the MO Delete script
This is done by ./undomo add2nde1inrxi_PUJMMU.mo > pujmrxibesi01.mo [~]$ ./undomo add2nde1inrxi_PUJMMU.mo > pujmrxibesi01.mo [~]$ Where add2nde1inrxi_PUJMMU.mo is the script which was run earlier And pujmrxibesi01.mo is the Delete Script Modify add2nde1inrxi_PUJMMU.mo so that downtime will be less Run pujmrxibesi01.mo to undo the wrongly defined MO Then run the modified/correct add2nde1inrxi_PUJMMU.mo
To check E1 state In RXI St ms-20-2 Check whether port locked or not Pr pp2 or pp7 (ETM1) lst Slot=8.*Vc12Ttp=5$ (ETMC41, MS-8-5) Get proxy and view admin state whether locked or not Then do deblocking Deb proxy St proxy Make sure port is deblocked (can also see in EMAS)
pr pp(port#)
In RBS
To restart / reload board In all nodes Acc 000900 restart Acc 001400 reload
GSG get set get In RNC To activate type gsg To deactivate type gsg again Use run command (not trun)
run and trun In all nodes trun is only for xml scripts
trun for running the last script : rbs_EQINMU_site_complete.mo run is for any script (txt for for example) open logfile l+ 20060113_CR003_RNCTGEM01.log cannot have undo mode while having gsg activated run CR003_13012006.txt close logfile
RXIKPNG02> cab 060206-11:09:22 ....... =========================================================================== ========================== SMN APN BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR TEMP COREMGR =========================================================================== ========================== 0 1 SCB2 ON OFF OFF ROJ 119 2108/3 R3D 20050608 TU86364489 0 2 HUB MP ON OFF OFF ROJ 119 2106/40 R5A 20050626 TU86494707 +32C Active 0 3 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050626 TU86494699 +31C StandbyReady 0 4 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050620 TU86442436 0 5 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050620 TU86442439 0 8 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644146 0 10 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644042 0 12 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644052 0 14 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644056 0 16 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644037 0 18 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644067 0 20 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050708 TU86592867 0 24 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545997 0 25 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545998 0 26 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545996 0 27 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86546001 0 0 SCB2 ON OFF OFF ROJ 119 2108/3 R3D 20050608 TU86364157 ----------------------------------------------------------------------------------------------------1 is slot 1 0 is slot 28
maxDlPowerCapability /maxDl
In RBS In RBS
redefine TD in VC
In RXI
Resources for CELL does not come up apparently TD is defined as U42 lget AtmPort=MS-24-1,VplTp=vp1,VpcTp=1,VclTp=vc39 lrset AtmPort=MS-24-1,VplTp=vp1,VpcTp=1,VclTp=vc39 atmTrafficDescriptorId AtmTrafficDescriptor=C2P4000
Check E1 loop
In node
LST carrier
KIRAMU> lst carrier 060303-10:58:44 =========================================================================== ======== Proxy Adm State Op. State MO =========================================================================== ======== 1208 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1 1210 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Ssch=1 1211 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Psch=1 1212 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pcpich=1 1213 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pccpch=1 1214 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pccpch=1,Bch=1 1215 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Prach=1 1216 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Prach=1,Rach=1 1217 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Aich=1 1218 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=2 1219 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=2,Fach=1 1220 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=2,Fach=2 1221 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=1 1222 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=1,Pch=1 1223 1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pich=1 1225 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1 1227 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Ssch=1 1228 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Psch=1 1229 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pcpich=1 1230 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pccpch=1 1231 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pccpch=1,Bch=1 1232 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Prach=1 1233 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Prach=1,Rach=1 1234 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Aich=1 1235 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=2 1236 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=2,Fach=1 1237 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=2,Fach=2 1238 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=1 1239 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=1,Pch=1 1240 1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pich=1
1242 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1 1244 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Ssch=1 1245 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Psch=1 1246 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pcpich=1 1247 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pccpch=1 1248 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pccpch=1,Bch=1 1249 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2 1250 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2,Fach=1 1251 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2,Fach=2 1252 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=1 1253 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=1,Pch=1 1254 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pich=1 1255 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Prach=1 1256 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Prach=1,Rach=1 1257 1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Aich=1 =========================================================================== ======== Total: 45 MOs - for fully operational site
OSSRC IP address 10.125.7.103 telnet the IP address before the main RBS IP
In node
pr iub pot3 to get RBSID or Pr iub *RBSID* Get the proxy for the Aal0 - look for the name RXI pr .124
Utrancell Relations
In node RNC lpr utrancell=evermu_2 utranrelation
(1 means 1 db)
(7 means 7 db)
To change cell reserved unreserved, 1) moshell to RNC 2) lt all 3) lget alammu cellreserved To change to unreserved 4)lset alammu_1 cellreserved 1 To change to reserved 5) lset alammu_1 cellreserved 0