Professional Documents
Culture Documents
Test Spec Test Specification: TL Audio ": EO Issue 1: 11th March 1996
Test Spec Test Specification: TL Audio ": EO Issue 1: 11th March 1996
INDIGO
TEST SPEC
2011
EO
"
--
~-
Tolerance on inputs +/-O.3dB. outputs +/-ldB. unlessstated otherwise. Tests must be perforDIed in lequeace. with coDtroll chuged only as jDdicated.
Measure resistance the between ground of theIEC inlet to thechassis the pin ground screw. VISUAL INSPEcrlON: ~ theuni.. payingpaltiaJ]Mattention thefoUmng: to diodes capacitors, aDd
-thequalityof extcmaI~t
andsilk screening,
3.6
3.7 3.8 3.9
4.
SWITCH ON.
4.1
~b
~.1
Output OdBu. XLR ln~t, Gain 0dB. XLR O/P, EQ out, Dual 2 Band mo<k:. 1KHz, Sine, 0dBu, 22-22k Filta, Meter.
AdjustRVl andRV4on PCI33 for A andB balance ~Iy. 5.2 INPUT GAIN: A2: Equaliser: -20dBu. Check in~t gainvariation+/-20dB.
AdjustRVI (channel andRV2(chanDel on PCl37. A) B) 5.4 BUM AND NOISE: A2: Equaliser: 5.5 Mute~. CutlBoost oontrols cenlered. o.tpat-14dBL
\
Umit ..8OdBu.
5.6
5.7
Output-20dBu.
.. . . .
5.8 PEAK LED:
A2: Equaliser: OdBu. [Dplt and out~t via XLR. output,
Adjust the input gain, chC(:kung the PEAK LED resins to glow @ ~u that and is fully iUwninated @ + l6dBu OUlplt.
5.9
tOHz-40KHz -+ii,-ldB.
5.tO
EQ RESPONE: A2: For ~h ALT waveform. 00nd,check flat at eachswitchedfrequency.and ~st/cut res}:X)Dse.
~.12.
DISTORTION:
Umit 0.20/.
A2:
6. SOAK TEST.
7.
QA CHECK.