Professional Documents
Culture Documents
MP 140
MP 140
MP610, MP800, MP820, MP810, MP830, MP960, MP970 Reset Canon MP140 Reset methode on canon MP145 work also on MP140, you can read the methode here: reset waste ink counter canon pixma mp145 Reset Canon Pixma MP160, Mp180, MP460 To reset the printer model you can use MPtool software, the reset methode can be found here: reset canon pixma mp160, mp170, mp180 and mp460 using mptool software. But before using MPTools software you must read this comment to reset our printer without error. Reset Waste Ink Counter Canon Pixma MP210 and Canon Pixma MP220 1. 2. 3. 4. 5. Start with printer off Press and hold resume Button (triangle in the hold the Power button, release Resume Button. Without releasing the Power Button, double click Click Resume for four times then click Power
Resume button and then release Both Buttons. button, to confirm the selected action (reset counter absorber). 6. Turn off the printer and turn on again
Reset Ink Level Canon Pixma MP460 (Manual Methode) 1. 2. 3. Disconnect the power cable Hold down power button Reconnect the power cable
With the power button still down, press twice the Release the power button The printer is now in factory mode(wait about 30 Press the down arrow (next to the OK button) Press the OK Button Now with it displaying Without Cleaning press A test page should print Now open cover Disconnect the power again Take both cartridges out like normal Close cover Reconnect power cable Press power button Replace cartridges
note: Other methode to reset ink level you can use MPtool software Reset Ink Level Canon MP470 It is basically a modified reset procedure for Canon MP460. 1. 2. 3. 4. Disconnect the power cable. Hold down On/Off button. Reconnect the power cable. With the power button still down, press the Release the On/Off button. The printer is now in factory mode (wait until idle
is displayed)
7.
Press the right arrow button (next to the OK Press the OK Button Wait until Without Cleaning is displayed and A test page should print. Open the cover. (the cartridges should position
themselves at the far left the cartridge removal location) 12. 13. 14. 15. 16. 17. 18. Disconnect the power cable. Remove both cartridges. Close the cover. Reconnect the power cable. Press the On/Off button. Wait until a Replace Cartridges message is Wait until the printer is operating in its normal
displayed. Now insert the cartridges. mode. The display shows the normal start menu (ie: Copy). to view the Ink level
Check by going to printer ->properties -> maintenance -> view printer status
Reset Canon Pixma MP520 maybe Work Also on Canon MP500, MP510 and MP530 To reset Canon Pixma MP520 view this article: Resetting Canon Pixma MP520 Reset Methode for Canon MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970 was removed by admin because doesnt work
Note: Some of the reset method has update on April 20, 2010
Related Post to "How to Reset Printers Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970"
Resetting Instructions for Canon Printers using Service Tool/Software Resetter Saving Your Money Every Time You Print using InkSaver Software Resetter canon i320 Manual Reset Canon MP500 SSC Service Utility Versions 4.30 (sscserve.exe v 4.30) Available to Download Reset counter Epson Stylus Photo RX700 Using Software Resetter Disabling Low Ink Level Notification for Canon IP and MP
88 Responses to How to Reset Printers Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970
Hacker
April 28th, 2008 at 7:44 am
MP470 Canon Printer You can disable the NO INK warning by pressing and holding the Stop/Reset (red triangle in circle) button for more than five seconds.
The reset method work for canon printers that using PG-40 and CL-41 cartridges. After doing this reset method your printer will not display low ink notification anymore and will not show error code E4 or E5. This method takes from indoreset yahoo group and prepared by Choy. Here how, the method to reset ink level notification: 1. Push resume for 5 seconds for canon IPXXXX. Push Power switch then remove power cord. Insert plug power cord while pressing power Push Start/reset by step 2 continue Wait display Push + change display from 0 to 1 Push color button 2 times Push Power switch again , Printer will print 1 page Open cover Unplug power cord Take out ink cartridge #40 and #41 Insert plug again Push power switch Open cover (scan cover) Insert ink cartridge #40 and #41 again
For canon MPXXX you must enter to service mode. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button. When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
1.
Run generaltool.exe or the application or Select USB port of the printer to be reset. Click lock release button.
executable file. 2. 3.
4. 5. 6. 7.
IN Select Destination option, select the printer In Test Print option, select EEPROM clear. Prepare a paper and then click test pattern 1 Turn off the printer and turn on again.
model.
1. 2. 3. 4. 5. 6.
Run generaltool.exe or the application or Select USB port of the printer to be reset. In Select Destination option, select the printer In Test Print option, select EEPROM clear. Prepare a paper and then click test pattern 1 finish it
executable file.
model.