Professional Documents
Culture Documents
Page 1 of 2
1. Create following configurations Name Parameters Normal All PDs are closed. Tie-Open Open Tie CB Co Gen Off Open Generator terminal CB Network 1 Down Disconnect Network 1 from sources
2. Revision Merge - I Create Revision4 Merge Revision 1 and Revision 2 to Revision 4. Check the difference between Revision 1 and 4. 3. Revision Merge - II Merge Revision 1 to Revision 3. Check T1 and T3 impedance. Are they same and why? 4. Change in Base Revision Data In Base Revision, change Cable1 and Cable 2: Length = 1000, Size = 750. Run Device Duty Calculation Check cable data in Revision 1 4. Are they same as Base and why? Check report
Page 2 of 2