Professional Documents
Culture Documents
Crimping Network Cables: Tools and Materials You Will Need
Crimping Network Cables: Tools and Materials You Will Need
Wire stripper
Wire cutter
RJ-45 plugs
Optional Tools
Wire Tester
Procedure
1. Strip off insulation
2. Untangle wires
4. Trim wires to desired length. Note: If the wires are too long the plug will not crimp onto the insulation for strength.
5. Slide wires all the way into the plug. Make sure not to disrupt the color scheme.
6. Crimp plug.
7. Repeat steps 1-6 for the other end. 8. Test wire using optional test equipment or between working computer and hub for patch (straight through) cables ,or between switches for crossover cables.
Crossover Cable One end as a patch cable and the other as follows
Diagram