Professional Documents
Culture Documents
1. The loop shows in Figure 1 is rotating about the z-axis in the a direction at w [rad/s]. There is a magnetic ux density eld B = (B1 t + B0 )a x [T] present. (a) Solve for the voltage across the resistor R using Vemf = (u B ) dl. (b) Indicate the direction of the current owing in the loop and solve for the voltage and why is this answer dierent from 1a? across the resistor R using Vemf = t (c) Solve for the instantaneous power p(t), where p(t) =
2 Vemf . R
z B B R A B B x
Figure 1: Revolving wire loop
C y D
2. If B = 0.2 cos 150t a z , (a) Solve for the voltage induced in the loop from Figure 2 (the loop is not moving). (b) Solve for the current i(t) owing in the loop. (c) Is V1 = V2 ?
0 1
1 _ V + 1
R1 = 10W
2 y B
2 x
R2 = 5W
_ V + 2
3. The loop in Figure 3 is in motion with velocity u = uo a y [m/s]. The ux density is y B = Bo e a z [T]. (a) Solve for VAB , VDC , and Vemf . Hint: Vemf = VAB VDC (b) Solve for the current.
4. If B in Figure 4 is B = Bo a z , solve for the voltage on the meter and indicate polarity.