Professional Documents
Culture Documents
3G Parameters
3G Parameters
Meaning
Feature Name
Unit
FDD Qmin
This parameter specifies one of the parameters for FDD cell reselection. A FDD cell becomes a candidate cell if all the following conditions are met for five consecutive seconds: 1.Receive level of the FDD cell > Average receive level of the current serving cell + "FDD Q offset"; The FDD cell meets the following condition in the case of any neighboring 2G cell: Receive level of the FDD cell > Receive level of any neighboring 2G cell + "FDD Q offset"; 2. Ec/No of the FDD cell > "FDD Qmin" "FDD Qmin Offset"; 3. Receive level of the FDD cell > "RSCP Threshold"; If multiple FDD cells meet the preceding conditions, the MS reselects the cell with the strongest receive level. See 3GPP TSs 45.008 and 25.304. The values of this parameter correspond to the following decibel values: 0: -20 dB, 1: -6 dB, 2: -18 dB, 3: -8 dB, 4: -16 dB, 5: -10 dB, 6: -14 dB, GSM/WCDMA -20, -6, -18, -8, -16, -10, 7: -12 dB. Interoperability 14, -12
dB
FDD Q Offset
This parameter specifies one of the thresholds of the signal level for 3G cell reselection. A FDD cell becomes a candidate cell if all the following conditions are met for five consecutive seconds: 1.Receive level of the FDD cell > Average receive level of the current serving cell + "FDD Q offset"; The FDD cell meets the following condition in the case of any neighboring 2G cell: Receive level of the FDD cell > Receive level of any neighboring 2G cell + "FDD Q offset"; 2. Ec/No of the FDD cell > "FDD Qmin" "FDD Qmin Offset"; 3. Receive level of the FDD cell > "RSCP Threshold"; If multiple FDD cells meet the preceding conditions, the MS reselects the cell with the strongest receive level. See 3GPP TSs 45.008 and 25.304. The values of this parameter correspond to the following decibel values: 0: - (always select a cell if acceptable) 1: -28 dB, 2: -24 dB, ... GSM/WCDMA Negative infinity, -28~28, 15: 28 dB. Interoperability step: 4
dB
Qsearch I
BSC6900
This parameter specifies the level threshold for cell reselection in idle mode. In idle mode, if the signal level of the serving cell is below [0, 7] or above [8, 15], the MS starts to search for 3G cells. For example, if this parameter is set to 5 and if the signal level of the serving cell is lower than 5, the MS starts to search for 3G cells; if this parameter is set to 10 and if the signal level of the serving cell is above 10, then the MS starts to search for 3G cells. The values of this parameter correspond to the following decibel values: 0: -98 dBm 1: -94 dBm 2: -90 dBm 3: -86 dBm 4: -82 dBm 5: -78 dBm 6: -74 dBm SET 7: (always), that is, the GCELLCCUTR MS keeps searching for ANSYS(Option 3G cells al) 8: -78 dBm
GBFD114301 GBFD114302
Qsearch P
BSC6900
This parameter specifies one threshold of the signal level for cell reselection in packet transfer mode. In packet transfer mode, if the signal level of the serving cell is below [0, 7] or above [8, 15], the MS starts to search for 3G cells. For example, if this parameter is set to 5 and if the signal level of the serving cell is lower than 5, the MS starts to search for 3G cells; if this parameter is set to 10 and if the signal level of the serving cell is above 10, then the MS starts to search for 3G cells. The values of this parameter correspond to the following decibel values: 0: -98 dBm 1: -94 dBm ... 6: -74 dBm 7: (always) SET 8: -78 dBm GCELLCCUTR 9: -74 dBm ANSYS(Option ... al) 14: -54 dBm
GBFD114301 GBFD114302
BSC6900
Offset of the minimum threshold for Ec/No during a FDD cell reselection. A FDD cell becomes a candidate cell if all the following conditions are met for five consecutive seconds: 1.Receive level of the FDD cell > Average receive level of the current serving cell + "FDD Q offset"; The FDD cell meets the following condition in the case of any neighboring 2G cell: Receive level of the FDD cell > Receive level of any neighboring 2G cell + "FDD Q offset"; 2. Ec/No of the FDD cell > "FDD Qmin" - "FDD Qmin Offset"; 3. Receive level of the FDD cell > "RSCP Threshold"; If multiple FDD cells meet the preceding conditions, the MS reselects the cell SET with the strongest receive GCELLCCUTR level. ANSYS(Option See 3GPP TSs 45.008 GBFDal) and 25.304. 114301
Access
0 Cell
This parameter is valid only when the ""INTERRATCELLRESEL EN"" parameter regarding the "SET GCELLHOBASIC" Read & command is set to YES. Write
8 Cell
None
-98, -94, 90, -86, 82, -78, 74, (always), 78, -74, 70, -66, 62, -58, 54, Positive infinity(nev er)
-98, -94, 90, -86, 82, -78, 74, (always), 78, -74, 70, -66, 62, -58, 54, Positive infinity(nev er)
GSM/WCDMA Interoperability
0~7
Not involved
Not involved
None
Not involved
Not involved
None
None
15
15 Cell
None
15
15 Cell
dB
0 Cell
Validation of Modification
None
Radio
None
Radio
None
None
None
The parameter modificatio n has no Not impact on involve the d None equipment. None
The parameter modificatio n has no Not impact on involve the d None equipment. None
The parameter modificatio n has no Not impact on involve the d None equipment. None