Professional Documents
Culture Documents
2m
RIVKLE Elastic
The fastener with a metal threaded insert captured within a thermoplastic elastomer body, for assemblies subject to vibration.
If component A is made of steel, with a pilot hole to DIN ISO 273, RIVKLE Elastic without washer should be used. RIVKLE Elastic with washer is preferred for components made of plastic, aluminium or steel with an oblong hole. A starting torque can be stipulated for the screw fastening according to the pressure resistance of the fastening component.
The Advantages:
mounted from one side of the workpiece absorbs vibrations thereby reducing noise insulates against heat and electricity a force-locked screw fastening, producing screw security by means of appropriate starting torque clamp nodules
Technical Data
The starting torque MA is dependent on the component material and the quality of the screw. Axial load F should be tested for each application with all parameters being synchronised.
* ** ***
Thermal ageing in hot air oven Stress/Strain ASTM D 412; % remainder = % retention of mechanical characteristics Hardness, ASTM D 2240
125
2,4
104
6,8
113
+2
RIVKLE Elastic
Without a Washer
With a Washer
Product Code
2430 004 0300* 2431 004 0300* 2430 005 0300* 2431 005 0300* 2430 006 0300* 2431 006 0300*
Design D
without washer with washer without washer with washer without washer with washer M4 M4 M5 M5 M6 M6 M8 M8
d
15 15 15 15 18 18 22 22
L1
15,5 15,5 17,7 17,0 19,3 19,0 21,6
L2
1,5 1,5 3,7 2,0 4,3 3,0 5,6
Hole Diameter D1
10,3 + 0,2 10,3 + 0,2 10,3 + 0,2 10,3 + 0,2 13,0 + 0,2 13,0 + 0,2 16,0 + 0,2 16,0 + 0,2
Set Length L
9 9 9 9 10 10 11 11
2430 008 0300* without washer 2431 008 0300* with washer * available on request
Applications
Automotive Industry Fastening of filter housings, cover components etc.
General Industry Fastening of fan motors, printed circuit boards for electrostatic partition, fixing of sensitive gauges, switch cabinets etc.
Machinery manufacturers
Fastenings from Steel, Stainless Steel and Brass. Fastenings components from plastic
UNITEC, MEPLAG Plastic threaded parts, Plastic headed,metal threaded components
Screwdriver systems
Automatic feed screwdriver systems UNIQUICK BM2100 and PANTHER BM3100 offer hand-held autofed and purpose made fixed-head production systems Electrical and sheet metal industries
Our internal and field engineers provide a technical service based on sound product knowledge delivered in a competent and friendly manner.
Bollhoff, the international service provider of fastening and assembly systems, with its own production and development engineering.