Professional Documents
Culture Documents
Ultralow Offset Voltage Operational Amplifiers: V Max V/C Max V/Month Max V P-P Max 14 V C Temperature-Tested Dice
Ultralow Offset Voltage Operational Amplifiers: V Max V/C Max V/Month Max V P-P Max 14 V C Temperature-Tested Dice
FEATURES Low VOS: 75 V Max Low VOS Drift: 1.3 V/ C Max Ultra-Stable vs. Time: 1.5 V/Month Max Low Noise: 0.6 V p-p Max Wide Input Voltage Range: 14 V Wide Supply Voltage Range: 3 V to 18 V Fits 725,108A/308A, 741, AD510 Sockets 125C Temperature-Tested Dice APPLICATIONS Wireless Base Station Control Circuits Optical Network Control Circuits Instrumentation Sensors and Controls Thermocouples RTDs Strain Bridges Shunt Current Measurements Precision Filters GENERAL DESCRIPTION
VOS TRIM 1 IN
2
OP07
VOS TRIM
7 V+ 6 OUT 5 NC
+IN 3 V
4
NC = NO CONNECT
The OP07 has very low input offset voltage (75 V max for OP07E) which is obtained by trimming at the wafer stage. These low offset voltages generally eliminate any need for external nulling. The OP07 also features low input bias current ( 4 nA for OP07E) and high open-loop gain (200 V/mV for OP07E). The low offsets and high open-loop gain make the OP07 particularly useful for high-gain instrumentation applications. The wide input voltage range of 13 V minimum combined with high CMRR of 106 dB (OP07E) and high input impedace provides high accuracy in the noninverting circuit configuration. Excellent linearity and gain accuracy can be maintained even at
high closed-loop gains. Stability of offsets and gain with time or variations in temperature is excellent. The accuracy and stability of the OP07, even at high gain, combined with the freedom from external nulling have made the OP07 an industry standard for instrumentation applications. The OP07 is available in two standard performance grades. The OP07E is specified for operation over the 0C to 70C range, and OP07C over the 40C to +85C temperature range. The OP07 is available in epoxy 8-lead Mini-DIP and 8-lead SOIC. It is a direct replacement for 725,108A, and OP05 amplifiers; 741-types may be directly replaced by removing the 741s nulling potentiometer. For improved specifications, see the OP177 or OP1177. For ceramic DIP and TO-99 packages and standard micro circuit (SMD) versions, see the OP77.
REV. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 www.analog.com Fax: 781/326-8703 Analog Devices, Inc., 2002
OP07SPECIFICATIONS
OP07E ELECTRICAL CHARACTERISTICS (V = 15 V, T = 25C, unless otherwise noted.)
S A
Parameter INPUT CHARACTERISTICS Input Offset Voltage1 Long-Term VOS Stability2 Input Offset Current Input Bias Current Input Noise Voltage Input Noise Voltage Density
Symbol VOS VOS/Time IOS IB en p-p en In p-p In RIN RINCM IVR CMRR PSRR AVO
Conditions
Min
Typ 30 0.3 0.5 1.2 0.35 10.3 10.0 9.6 14 0.32 0.14 0.12 50 160 14 123 5 500 400 13.0 12.8 12.0 0.3 0.6 60 75 4 4
Max 75 1.5 3.8 4.0 0.6 18.0 13.0 11.0 30 0.80 0.23 0.17
Unit V V/Mo nA nA V p-p nVHz nVHz nVHz pA p-p pAHz pAHz pAHz m G V dB V/V V/mV V/mV V V V V/s MHz mW mW mV
0.1 Hz to 10 Hz3 fO = 10 Hz fO = 100 Hz3 fO = 1 kHz fO = 10 Hz fO = 100 Hz3 fO = 1 kHz 15 VCM = 13 V VS = 3 V to 18 V RL 2 k, VO = 10 V RL 500 , VO = 0.5 V, V S = 3 V4 RL 10 k RL 2 k RL 1 k RL 2 k3 AVOL = 15 VO = 0, IO = 0 VS = 15 V, No Load VS = 13 V, No Load RP = 20 k 13 106 200 150 12.5 12.0 10.5 0.1 0.4
Input Noise Current Input Noise Current Density Input ResistanceDifferential Mode4 Input ResistanceCommon-Mode Input Voltage Range Common-Mode Rejection Ratio Power Supply Rejection Ratio Large-Signal Voltage Gain
20
VO
DYNAMIC PERFORMANCE Slew Rate Closed-Loop Bandwidth Closed-Loop Output Resistance Power Consumption Offset Adjustment Range
SR BW RO Pd
120 6
NOTES 1 Input offset voltage measurements are performed by automated test equipment approximately 0.5 seconds after application of power. 2 Long-term input offset voltage stability refers to the averaged trend time of VOS vs. Time over extended periods after the first 30 days of operation. Excluding the initial hour of operation, changes in VOS during the first 30 operating days are typically 2.5 V refer to the typical performance curves. Parameter is sample tested. 3 Sample tested. 4 Guaranteed by design. 5 Guaranteed but not tested. Specifications subject to change without notice.
REV. A
Parameter INPUT CHARACTERISTICS Input Offset Voltage1 Long-Term VOS Stability2 Input Offset Current Input Bias Current Input Noise Voltage Input Noise Voltage Density
Symbol VOS VOS/Time IOS IB en p-p en In p-p In RIN RINCM IVR CMRR PSRR AVO
Conditions
Min
Typ 60 0.4 0.8 1.8 0.38 10.5 10.2 9.8 15 0.35 0.15 0.13 33 120 14 120 7 400 400 13.0 12.8 12.0 0.3 0.6 60 80 4 4
Max 150 2.0 6.0 7.0 0.65 20.0 13.5 11.5 35 0.90 0.27 0.18
Unit V V/Mo nA nA V p-p nVHz nVHz nVHz pA p-p pAHz pAHz pAHz m G V dB V/V V/mV V/mV V V V V/s MHz mW mW mV
0.1 Hz to 10 Hz3 fO = 10 Hz fO = 100 Hz3 fO = 1 kHz fO = 10 Hz fO = 100 Hz3 fO = 1 kHz 8 VCM = 13 V VS = 3 V to 18 V RL 2 k, VO = 10 V RL 500 , VO = 0.5 V, V S = 3 V4 RL 10 k RL 2 k RL 1 k RL 2 k3 AVOL = 15 VO = 0, IO = 0 VS = 15 V, No Load VS = 13 V, No Load RP = 20 k 13 100 120 100 12.0 11.5
Input Noise Current Input Noise Current Density Input Resistance- Differential Mode4 Input Resistance- Common-Mode Input Voltage Range Common-Mode Rejection Ratio Power Supply Rejection Ratio Large-Signal Voltage Gain
32
VO
DYNAMIC PERFORMANCE Slew Rate Closed-Loop Bandwidth Closed-Loop Output Resistance Power Consumption Offset Adjustment Range
SR BW RO Pd
0.1 0.4
150 8
NOTES 1 Input offset voltage measurements are performed by automated test equipment approximately 0.5 seconds after application of power. 2 Long-term input offset voltage stability refers to the averaged trend time of VOS vs. Time over extended periods after the first 30 days of operation. Excluding the initial hour of operation, changes in VOS during the first 30 operating days are typically 2.5 V refer to the typical performance curves. Parameter is sample tested. 3 Sample tested. 4 Guaranteed by design. 5 Guaranteed but not tested. Specifications subject to change without notice.
REV. A
OP07SPECIFICATIONS
OP07E ELECTRICAL CHARACTERISTICS (V = 15 V, 0C T 70C, unless otherwise noted.)
S A
Parameter INPUT CHARACTERISTICS Input Offset Voltage1 Voltage Drift without External Trim2 Voltage Drift with External Trim3 Input Offset Current Input Offset Current Drift Input Bias Current Input Bias Current Drift Input Voltage Range Common-Mode Rejection Ratio Power Supply Rejection Ratio Large-Signal Voltage Gain OUTPUT CHARACTERISTICS Output Voltage Swing
Symbol VOS TCVOS TCVOSN IOS TCIOS IB TCIB IVR CMRR PSRR AVO VO
Conditions
Min
RP = 20 k
VCM = 13 V VS = 3 V to 18 V RL 2 k, VO = 10 V RL 10 k
13 103 180 12
32
NOTES 1 Input offset voltage measurements are performed by automated test equipment approximately 0.5 seconds after application of power. 2 Guaranteed by design. 3 Sample tested. Specifications subject to change without notice.
Conditions
RP = 20 k
VCM = 13 V VS = 3 V to 18 V RL 2 k, VO = 10 V RL 10 k
13 97 100 11
51
NOTES 1 Input offset voltage measurements are performed by automated test equipment approximately 0.5 seconds after application of power. 2 Guaranteed by design. 3 Sample tested. Specifications subject to change without notice.
REV. A
OP07
ABSOLUTE MAXIMUM RATINGS *
Supply Voltage (VS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V Input Voltage* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . 30 V Output Short-Circuit Duration . . . . . . . . . . . . . . . . Indefinite Storage Temperature Range S, P Packages . . . . . . . . . . . . . . . . . . . . . . 65C to +125C Operating Temperature Range OP07E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C OP07C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40C to +85C Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . 150C Lead Temperature Range (Soldering, 60 sec) . . . . . . . . 300C
*For supply voltages less than 22 V, the absolute maximum input voltage is equal to the supply voltage.
JC 43 43
*JA is specified for worst case conditions, i.e., JA is specified for device in socket for P-DIP package, JA is specified for device soldered to printed circuit board for SO package.
ORDERING GUIDE
Package Description 8-Lead Epoxy DIP 8-Lead Epoxy DIP 8-Lead SOIC
Branding Information
CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the OP07 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. A
25 VS = 15V TA = 25C 20
800
20
600
25
15
15
THERMAL SHOCK RESPONSE BAND
400
10
10
OP07C OP07E
200
0 50 0 50 100 TEMPERATURE C
0 20
20
40 TIME s
60
80
100
0.8
1.0
VS = 15V 0C TA 70C
1.0
1.2
20
0.8
10
0.6
0.6
10
20 30 30
20
10
10
20
30
VOLTAGE 200nV/DIV
50 100
0 0 0 0 0 0 TIME 1s/DIV
1.5
OP07C
1.0
OP07C
1 OP07E
0.5 OP07E
50
50
100
50
TEMPERATURE C
TEMPERATURE C
REV. A
OP07
1000
INPUT NOISE VOLTAGE nV/ Hz
10 VS = 15V TA = 25C
100
CMRR dB
10 100 1k
100 90 80 70
0.1 1.0
60 1.0
10
100
1k
10k
100k
FREQUENCY Hz
FREQUENCY HZ
120
TA = 25C
800
VS = 15V TA = 25C
OPEN-LOOP GAIN dB
0 5 10 15 20
110
80
CMRR dB
100 90 80 70 60 1.0
600
40
400
200
10
100
1k
10k
100k
40 0.1
10
100
1k
FREQUENCY HZ
FREQUENCY Hz
100
80
CLOSED-LOOP GAIN dB
15
POSITIVE SWING
60
NEGATIVE SWING 10
40
20
0 20 10
100
1k
10k
100k
1M
10M
10k
100k
1M
0 100
FREQUENCY Hz
FREQUENCY Hz
10k
REV. A
OP07
ABSOLUTE VALUE OF OFFSET VOLTAGE V
1000 VS = 15V TA = 25C
INPUT NOISE VOLTAGE nV/ Hz INPUT NOISE VOLTAGE nV/ Hz
100
100
2 OP07E 1
1.0 0 20 40 FREQUENCY Hz 60
1.0 0 20 40 FREQUENCY Hz 60
0 50 0 50 TEMPERATURE C 100
4 VOS TRIMMED TO < 5V AT 25C NULLING POT = 20k 3 OP07C 2 OP07C 1 OP07E 0 50 0 50 100 TEMPERATURE C OP07E
12 TOTAL DRIFT WITH TIME V 8 4 0 4 8 12 16 0 1 2 3 4 5 6 7 0.2V/mo. TREND LINE 0.3V/mo. TREND LINE
9 10 11 12
TIME Months
REV. A
OP07
RF RIN R1 V+ R3 3k 2 7 6 R5 10k 3 3 4 V EO = EIN RF IBIAS RF R1 4 V 2 7 6 EO R1 EIN 10k 10V SUM MODE BIAS R3 10k V+ V+ 7 FD333 D1 2 6 R4 10k R5 10k V+ 7 6 EO
OP07C A1
R2 100k
AD7115 OR AD8510A
0V TO 10V 3
OP07
4 V R2 10k FD333 D2
OP07
4 V
R1 = R2 R3 R4
E2
OP07C
Figure 3. Typical Low-Frequency Noise Circuit Figure 6. High-Speed, Low VOS Composite Amplifier
R1 SENDING JUNCTION E2 2 R3
V+ 7 6 EO
REFERENCE JUNCTION
R2
OP07
4 V
R4
R1 = R2 R3 R4
Figure 4. Optional Offset Nulling Circuit Figure 7. Adjustment-Free Precision Summing Amplifier
REV. A
OP07
TYPICAL APPLICATIONS
APPLICATIONS INFORMATION
OP07 series units may be substituted directly into 725, 108A/ 308A* and OP05 sockets with or without removal of external compensation or nulling components. Additionally, the OP07 may be used in unnulled 741 type sockets. However, if conventional 741 nulling circuitry is in use, it should be modified or removed to enable proper OP07 operation. OP07 offset voltage may be nulled to zero through use of a potentiometer (see offset nulling circuit diagram).
PRECISION ABSOLUTE-VALUE CIRCUIT
The OP07 provides stable operation with load capacitance of up to 500 pF and 10 V swings; larger capacitances should be decoupled with a 50 Q decoupling resistor. Stray thermoelectric voltages generated by dissimilar metals at the contacts to the input terminals can degrade drift performance. Therefore, best operation will be obtained when both input contacts are maintained at the same temperature, preferably close to the package temperature.
*TO-99
Package only
10
REV. A
OP07
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
0.0500 (1.27) BSC 0.0098 (0.25) 0.0040 (0.10) SEATING PLANE 0.0688 (1.75) 0.0532 (1.35) 0.0192 (0.49) 0.0138 (0.35)
0.0196 (0.50) 45 0.0099 (0.25) 8 0.0500 (1.27) 0.0098 (0.25) 0 0.0160 (0.41) 0.0075 (0.19)
Revision History
Location Data Sheet changed from REV. 0 to REV. A. Page
Edits to FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Edits to ORDERING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Edits to PIN CONNECTION drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Edits to ABSOLUTE MAXIMUM RATINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Deleted ELECTRICAL CHARACTERISTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Deleted OP07D Column from ELECTRICAL CHARACTERISTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Edits to TPCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Edits to HIGH-SPEED, LOW VOS COMPOSITE AMPLIFIER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
REV. A
11
12
C0031602/02(A)
PRINTED IN U.S.A.