You are on page 1of 2

ED88

ENGINE HOOD / DOOR BODY

ENGINE HOOD / DOOR LUGGAGE COMPARTMENT DOOR LOCK

LUGGAGE COMPARTMENT DOOR LOCK


COMPONENTS

LUGGAGE COMPARTMENT DOOR COVER

5.5 (56, 49 in.*lbf)

ED
LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY N*m (kgf*cm, ft.*lbf) : Specified torque
B144976E01

ENGINE HOOD / DOOR LUGGAGE COMPARTMENT DOOR LOCK

ED89

REMOVAL
1. 2. REMOVE LUGGAGE COMPARTMENT DOOR COVER (See page ET-50) REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (a) Disconnect the rod.

B136491

(b) Disconnect the connector. (c) Remove the 2 bolts and luggage compartment door lock assembly.

B136880

INSPECTION
1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK (a) Move the door lock to the lock position. (b) Apply battery voltage to the door lock motor and check operation of the door lock motor. OK
Measurement Condition Battery positive (+) Terminal 1 Battery negative (-) Terminal 2 Specified Condition Unlock

ED

If the result is not as specified, replace the luggage compartment door lock assembly.

B137937

You might also like