Professional Documents
Culture Documents
20 (204, 15)
ED
GROMMET
ED33
REMOVAL
1. 2. REMOVE FRONT WHEEL REMOVE FRONT WHEEL OPENING EXTENSION PAD (a) Remove the 3 screws and the front wheel opening extension pad. REMOVE FRONT BUMPER ASSEMBLY (See page ET-3)
3.
B146089
4.
REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY (a) Remove the 5 clips and bolt. (b) Remove the 4 screws, grommet, and the front fender splash shield sub-assembly. REMOVE HIGH PITCHED HORN ASSEMBLY (See page HO-8)
5.
B144972
6.
ED
B136821
(b) Disconnect the hood lock control cable. (c) Remove the hood lock assembly.
B136827
ED34
7.
REMOVE HOOD LOCK CONTROL LEVER SUBASSEMBLY (a) Disconnect the hood lock control cable and remove the hood lock control lever. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (a) Using a screwdriver, disconnect the clamps shown in the illustration.
8.
B136909
A D B C F K E A F M A A G
B144973E01
H L I A K F B
B J A B F F A
Area
Part Name Hood lock control cable Clamp Wire harness Pillar Nut Radiator support upper Hood lock protector
Area H I J K L M Grommet
Part Name
ED
A B C D E F G
Side member outer Radiator Radiator support cover Front fender apron Brace -
HINT: Tape the screwdriver tip before use. (b) Pull the cable from the engine compartment and remove it.