You are on page 1of 9

More ideas from Nearchimica.

For How to Do It information quote number

56

DYE MET SOILS Application by spraying on denims


Spray all over with inorganic pigment, emphasising where more colour is required, pull off the mannequin, dry in oven, cure at 140C for 10 minutes. Scrape by hand. Spray with permanganate. React. Neutralise. Stone wash and soften

57

58

59

PASTA PERLATA ORO

Shiny-smooth-gold effect with PASTA PERLATA ORO


Spray gold paste and polyurethane resin, smooth with a damp brush, dry in oven at 60-80C, Hot press at 120C for 5 seconds and 40 kg/cm2. Cure in oven at 140C for 20 minutes. Rinse in water at 40C for 15 minutes. Turn in hot tumble dryer for 30 minutes.

60
Vintage effect on linen with NEAREASUL DYES sulphur dyes applied by exhaustion
Cationise with NEARSTONE PST at 70C, rinse. Dye with NEAREASUL dyes at 70 C. Soaping Biopolishing Softening.

61

Produce permanent wrinkles with NEARFINISH HPU by spraying, then dye with direct or reactive dyes.
NEARFINISH HPU can be applied on garments to give permanent wrinkles, it differs from glyoxal resins in that it does not affect cellulose resistance and its final dyeability. Spray NEARFINISH HPU at 60% (600g/l) where wrinkles are required, then spray all-over (to level eventual differences). Dry in oven at 50-60C, create the wrinkles, cure in oven at 140C. Rinse in water, Dye with direct or reactive dyes.

62
Permanent wrinkles and devor effect without affecting tear-resistance by spraying with NEARFINISH HPU
Spray with NEARFINISH HPU where wrinkles are required, then spray all-over. Dry in oven at 50 - 60 C. Apply devor effect by screen printing or template. Create the wrinkles, cure in oven at 140C for 20 minutes. Do scraping by hand on inflatable mannequin. Spray potassium permanganate and leave to react, neutralise. Stone wash and soften.

VINTAGE EFFECTS WITH NEAROPACIZZANTE AV

63
Starting from garment already conventionally dyed black with reactive dyes, create a used effect imitating pigment dyeing in dark shade. Cationise at 40 C with NEARSTONE PD. Run 5 minutes, add: NEARFIX PF. Run 5 minutes, heat to 60C, run 15 minutes, add NEAROPACIZZANTE AV Keep at 60C for 30 minutes. Rinse well with fresh water. Soaping Biopolishing Softening

DYE MET SOILED APPEARANCE Application by soaking

64

Create creases with plastic tags, dip into dye liquor made with DYE-MET inorganic pigments and PASTA NEUTRA, impregnate at room temperature then squeeze by hand. Hang dripping then dry in oven, cure at 140C. Scrape by hand. Spray with permanganate. Neutralise. Stone wash and soften.

For How To Do It information contact Nearchimica and quote Reference Number.

You might also like