Professional Documents
Culture Documents
Welding Electrode
Welding Electrode
AWS E6013
Description: E6013 is of low mild steel type electrodes with titanium coating and suitable for both AC and DC. It can weld in all position. Manipulate is free and restrike is easy. Application: Used to weld low carbon steel structures, especially suitable for welding thin flat, intermittent shorter welds, as well as some smooth appearance cover. Chemical Composition (%)
C 0.10 Mn 0.30.6 Si 0.035 S 0.035 P 0.04
Reference Current
Diameter (mm) Current 2.0 4070 2.5 7090 3.2 90120 4.0 150190 5.0 180240
AWS E6016
Description: E6016 is of carbon steel electrodes with low hydrogen potassium type coating. The weld metal has superior mechanical properties and high crack resistant properties. It can be welded on both AC and DC. Welding can be done in all position. When used AC, the stability is inferior a little to that used DC. Application: Used to weld the important low carbon steel structure and low alloy steel structure, such as 09Mn2 etc. Chemical Composition (%)
C 0.10 Mn 1.25 Si 0.90 S 0.035 P 0.04
Reference Current
Diameter (mm) Current 2.5 6090 3.2 90130 4.0 150190 5.0 180230
Note: Before welding, it is necessary to clean the work piece and remove the impurities such as oil, grease rust and moisture, bake the electrode at the temperature of about 300 degree centigrade for one hour. The welding must be carried out under short arc and is suitable for narrow path.
AWS E7016
Description: Descri ption: E7016 is o of f carbon stee steel l elec electrodes trodes with l low ow hyd hydrogen rogen po potassium tassium t type ype coating . The weld metal has superior mechanical properties and high crack resistant properties. It can be welded on both AC and DC. Welding can be done in all position. When used AC, the stability is inferior a little to that used DC. Application: Used to weld middle carbon steel and low alloy steel structure, such as 16Mn, 09Mn2Si etc. Chemical Composition (%)
C 0.12 Mn 1.60 Si 0.75 S 0.035 P 0.04
Reference Current
Diameter (mm) Current 2.5 6090 3.2 90130 4.0 150190 5.0 180230
Note: Before welding, it is necessary to clean the work piece and remove the impurities such as oil, grease rust and moisture, bake the electrode at the temperature of about 350 degree centigrade for one hour. The welding must be carried out under short arc and is suitable for narrow path.When used DC, the electrode must be connected with positive polarity.
AWS E7018
Description: E7018 is an excellent carbon steel electrode with iron powder low hydrogen potassium coating. It is used on both AC and DC in all position. As the coating contains iron powder, it has highly efficient welding and can reduce welding layers. Application: Used to weld low carbon structure and low alloy steel structure, such as 16Mn etc. Chemical Composition (%)
C 0.12 Mn 1.60 Si 0.75 S 0.035 P 0.04
Reference Current
Diameter (mm) Current 2.5 90120 3.2 120150 4.0 170200 5.0 210250
Note: Before welding, it is necessary to clean the work piece and remove the impurities such as oil, grease rust and moisture, bake the electrode at the temperature of about 350 degree centigrade for one hour. The welding must be carried out under short arc and is suitable for narrow path. When used DC, the electrode must be connected with positive polarity.
Reference Current
Diameter (mm) Current 2.5 5080 3.2 80110 4.0 110160 5.0 160200
Note: Before welding ,the electrode must be baked at about 250 degree centigrade for one hour.
Reference Current
Diameter (mm) Current 2.5 5070 3.2 80110 4.0 130160 5.0 160200
Note: Before welding, the electrode must be baked at about 150 degree centigrade for one hour . It should be used on DC possibly, not too large current otherwise the electrode become red easily. The melting depth is lower when used AC.
AWS E308L-16
Description: E308L-16 is a super low carbon stainless steel electrode with titanium calcium type coating. As the carbon rate in the weld metal is no more than 0.04%, it has good inter-crystalline corrosion resistant properties. It is used on both AC and DC and the manipulate is free. Application: Used to weld super low carbon chrome 19nickel 11titanium stainless steel structure. It also can weld 0chrome 19nickel 11titanium stainless steel structure which is anticorrosion and work under 300 degree centigrade. The electrode mainly used in the equipment manufacture of synthetic fibre, fertilizer and petroleum etc. Chemical Composition (%)
C 0.04 Mn 0.52.5 Si 0.90 Cr 18.021.0 Ni 9.011.0 Mo 0.75 Cu 0.75 S 0.03 P 0.04
Reference Current
Diameter (mm) Current 2.5 5080 3.2 80110 4.0 110160 5.0 160200
Note: Before welding, the electrode must be baked at about 150 degree centigrade for one hour . It should be used on DC possibly, not too large current otherwise the electrode become red easily.
AWS E316-16
Description: E316-16 is a low carbon stainless steel electrode with titanium calcium type coating. As the deposited metal contains Mo, it has good resistant properties against heat, corrosion, and crack, especially against the corrosion of chlorine ion. It is used on both AC and DC and has good manipulate properties. Application: Used to weld 0chrome 18Nickel 12Mo 2 stainless steel structure worked in the medium of organic acid and inorganic acid (not oxidizing acid), or weld heterogeneity steel structure. Chemical Composition (%)
C 0.08 Mn 0.52.5 Si 0.90 Cr 17.020.0 Ni 11.014.0 Mo 2.03.0 Cu 0.75 S 0.03 P 0.04
Reference Current
Diameter (mm) Current 2.5 5080 3.2 80110 4.0 110160 5.0 160200
Note: Before welding, the electrode must be baked at about 150 degree centigrade for one hour . It should be used on DC possibly, not too large current otherwise the electrode becomes red easily. The melting depth is lower when used AC.
AWS E316L-16
Description: E316L-16 is a super low carbon chrome 18nickel 12Mo 2 stainless steel electrode with titanium calcium type coating. As the carbon rate in the weld metal is no more than 0.04%, it has good inter-crystalline corrosion resistant properties. It is used on both AC and DC and the manipulate is free. Application: Used to weld equipment of carbamide, synthetic fibre and the same types of stainless steel structure. It also can weld chrome stainless steel structure which can not be heated treatment after welding and clad steel and heterogeneity steel. Chemical Composition (%)
C 0.04 Mn 0.52.5 Si 0.90 Cr 17.020.0 Ni 11.014.0 Mo 2.03.0 Cu 0.75 S 0.03 P 0.04
Reference Current
Diameter (mm) Current 2.5 5080 3.2 80110 4.0 110160 5.0 160200
Note: Before welding, the electrode must be baked at about 150 degree centigrade for one hour . It should be used on DC possibly, not too large current otherwise the electrode become red easily.
Reference Current
Diameter (mm) Current 2.5 6090 3.2 90120 4.0 140180 5.0 170210
Note: Before welding, it is necessary to clean the work piece and remove the impurities such as oil, grease rust and moisture, bake the electrode at the temperature of about 350 degree centigrade for one hour.
AWS E8016-G
Description: E8016-Gis of low alloy steel electrodes with low hydrogen potassium type coating. It can be welded on both AC and DC. Welding can be done in all position. When used AC, the stability is inferior a little to that used DC. Application: Used to weld key structure of middle carbon steel and low alloy steel structure, such as 15MnTi, 15MnV etc. Chemical Composition (%)
C 0.12 Mn 1.0 Si 0.300.70 S 0.035 P 0.035
Reference Current
Diameter (mm) Current 2.5 6090 3.2 80110 4.0 130170 5.0 160200
Note: Before welding, it is necessary to clean the work piece and remove the impurities such as oil, grease rust and moisture, bake the electrode at the temperature of about 350 degree centigrade for one hour. The welding must be carried out under short arc and is suitable for narrow path.