Professional Documents
Culture Documents
OP-COM 081016 User Manual
OP-COM 081016 User Manual
Plug the cable into the interface, then plug the USB end into your PC; 3. PC find the new hardware, Install the USB driver as prompt; The pc maybe will ask you from where to install the USB drier. Please select from: OPCOM081016_ENDriver 4. Activation: Click folder Activate->Activate ->click file Activator.exe, Will appear: (You must activate from this path)
Click CAN
Diagnostics->Double
click
AUTOMATIC or
VEHICLE
IDENTIFICATION->Click
KWP-2000
Will appear:
Write the No. on a piece of paper. Close the window and exit. Open the software OP-COM.exe Click Diagnostics->Double click AUTOMATIC or VEHICLE IDENTIFICATION->Click KWP-2000
stochastic) 5. Click Settings->test interface, will appear: Interface test ended successfully.
6. Finished you can now operate the OPCOM when you connect the INTERFACE TO THE CAR