Professional Documents
Culture Documents
Case Studies Production and Operations Management
Case Studies Production and Operations Management
Indian Institute of Materials Management (IIMM) is a forum for purchase and materials related employees and they have frequent meetings, seminars and annual conventions to share knowledge. In one of their annual conventions the topic was implementation of JIT for competitive advantages. Leading personalities of the Indian industries talked lots of positive points and benefits due to the JIT purchase and JIT manufacturing methods. Many presented calculations and statistics of savings in costs and time and how it helps in reduce the price of the end products and hence competitive advantage. Most of the audience were impressed about the theory and thought of practical application in their respective companies. However, few of the executive participants were more worried about practice and less interested in idealistic theories. One Mr. JItendra Joshi of LMLs Bangalore office was impressed. He has been arranging Engine Block castings, tyre tube sets, machined components, speedometers etc from southern region to LML, Kanpur Unit. He has 15 years of experience in facing lots of problems in arranging the long distance supplies. He mustered courage to get up and ask few questions against the JIT and summary of question to Mr. Sudhakar (the speaker) were as follows: Mr. Joshi said JIT cannot be fully implement able in Indian conditions due to following genuine constraints. (a) The inter-state disputes like Kaveri Dispute, Border disputes at times disturb the arrangements. (b) On and off terrorism, political agitatations, holidays due to local, regional and national leaders deaths also disturb work environment. (c) Spread of vendors all over India and vastness of coverage do not enable to know correct position of WIP of vendors. (d) Transport bottlenecks, heavy rains, floods (coastal areas), workers strikes cause anxiety and worry. (e) Partnership problems, financial and quality constraints are not easily attended or solved. These questions were like a mini speech on anti JIT and the atmosphere in the auditorium got charged up Mr. Sudhakar, the speaker, gave half hearted replies to questions for which Mr. Joshi and his friends were not satisfied. Finally Mr. Sudhakar said: The system which operate successfully in Japan may not work equally well in other countries. Only when Mr. Joshi took his seat as he felt he has made his clear on
practical problems than merely going through the theory. Suddenly he seems to have won the admiration of the gathering. Prof. Rao who was chairman of the technical session gave his concluding remarks. He appreciated the ideology of JIT but advised executives to take it up step by step and ensure pragmatic views and do not overdepend on JIT to fail. This he told as Indian Industrial Environment is yet to mature to take care of JIT systems in totality. QUESTIONS 1. Explain why JIT purchase works well in the developing countries 2. Do you agree with Mr. Joshis views on constraints to JIT? Explain the correct problems in northern and eastern India. 3. Write how you feel the JIT systems can be adopted in India with an example.
air. Though PSU was not started a private enterprise JInal Group took interest and applied for license to the Central Government. By the year 1990 they obtained license and Vijaynagar Steel plant with foreign technology and decided to make only sheet products, which fetch higher prices. They also kept bare minimum workforce and executives to make it economical right from inception. By this time broad gauge lines were formed and nearest seaport was Goa and hence some problems were taken care. This unit became operative in about 3 years and is also running profitably. QUESTIONS 1. What are essential factors for locating a Steel plant and why? 2. Explain how political pressures and pulls effect decision making and delays in starting industries. 3. Explain how it was possible to make Vijaynagar plant visible. 4. Technology, HR, natural facilities play vital role to start new enterprise. Explain your views.
manufacturing operations, simulate the ergonomics, and develop control code for the automation. With virtual manufacturing, one can predict the performance of a manufacturing process or a system without building the process or the system given set of manufacturing conditions. In addition to shortening the time required to bring products to market, Virtual Manufacturing will also reduce the cost of tooling, eliminate the need for multiple physical prototype, and reduce material waste, because you can get it right the first time. In short, it will provide a manufacturer the confidence of knowing that they can deliver quality products to market on time and within budget. The project manager of the digital factory at Audi, The number of model versions is complexity and scope of development work, but less time is available for development. A near model needs to be on the market as fast and in as great a volume as possible, right from the start. Without virtual planning methods, it would not be possible to realize several model projects every year. Virtual Manufacturing is one element, albeit it is a large and significant one, needed to fully address the issues involved in creating a workable on-line product development system. From a business perspective, it is clear that small improvements in manufacturing can have dramatic and profound effects in terms of cost and quality. For example, if it were possible to reduce, even slightly, the thickness of a given material, say the metal used to form the hood of an automobile, while at the same time maintaining, or even improving, its structural integrity, then, the potential cost savings would be enormous.
The evolution Prior to the digital revolution of the late 70s; the realization of the designers styling concepts, the definition of body sheet-metal, and the design and construction of stamping and assembly tooling relied entirely on physical models. Other models were used for the construction of assembly and checking fixtures. It took a while before the automotive and aerospace industries accepted CAD. Even then, it was used more like an electronic pencil than a design system, simply computerizing the existing methodology. It took years for design to evolve to the point where the CAD drawing was an output rather than the input to the process. Today, the process has evolved much further to a situation where 3-D geometry is now the basis of the design process. It is not surprising to see the design department in a typical automotive OEM using digitals tools to model vehicle shapes of new vehicles concepts. Here, sketching tools emulate paper, pen and paint. Photorealistic modelers give the designer an almost true to life view of the new model. In fact, today, vehicle component design is done entirely in A CAD. Digital assembly of the vehicle insures that the parts will fit and function together. Standard parts and steels are used from the CAD library. The finished design is inspected and adjusted in 3D CAD environment before build begins. Even here, assembly systems, manual work stations, conveyors, piping, and safety work envelopes are maintained within a CAD facility layout of the entire plant.
Benefits Reduced time-to-market Reduced cost of tooling Elimination of multiple physical prototypes Reduced material waste Confidence in the process Lowe overall manufacturing cost Improved quality
Discrete event simulation of the plant includes things like the conveyor speeds, production throughput, and machine downtime. These parameters assist in understanding causes of bottlenecks and the impact of new technology in the plant. Tool are in place The current scenario can be summarized this: The realistic simulation of products and process generally begins with a three dimensional model. Finite Element Modelling and dynamic simulation tools are helping reduce the cost while improving the performance of manufacturing tooling. The advantages of concurrent engineering are already felt The concept of virtual prototyping of products, if not yet manufacturing processed, is widely accepted. Rapid prototyping tools are helping streamline the tooling development process further, by eliminating steps in the manufacturing process. The mathematics of non linear simulations are well understood and confirmed by tests Database tools provide quicker and easier access to digital designs and equipment performance histories. The factory floor is getting populated with intelligent devices that are helping to reduce if not eliminate variability.
Leading edge companies have demonstrated the successful use of virtual manufacturing techniques. For example, the Boeing 777 is the first paper-less airplane produced, involving co-ordination with 250 crossfunctional teams in diverse locations. Furthermore, the rapid development in computing power has meant that virtual manufacturing is not restricted to large companies like Boeing who can afford powerful main
frames. Today, virtual manufacturing software operate on work stations running any of the popular operating systems. With all the tools conducive to virtual manufacturing in place, it may not be overoptimistic to claim the virtual manufacturing will soon be a business requirement for all manufacturing companies. QUESTIONS 1. Explain the methods adopted to speed of new model development 2. Compare how there are delays in product development in developing countries and speed at developing countries 3. What is the current scenario to product development 4. If you were M.D. of Maruti Udyog Ltd. what steps would you take to improve new product development in terms of time and cost.