Professional Documents
Culture Documents
DC Motor Drive Instructions
DC Motor Drive Instructions
SettheTracking&ModeSwitchtoSeriestrackingmode: When the left switch is engaged (in) and the right switch is disengaged (out), the unit is in the Tracking series mode. In this mode of operation, the positive terminal (Red) of the Slave (CH2) supply is connected to the negative terminal (Black) of the Master (CH1) supply. Adjust the output voltage to the desired level by using the Master (CH1) VOLTAGE controls. Note:PleasedontconnecttotheGreenterminalofPowersupply.
DCMotorDriverconnection:
1. Apply+12VtoV++,12VtoV(or+15VtoV++,15VtoV). 2. ConnectcontrolsignaltoControlterminalwhichcanvaryfrom9vto9v 3. Connectmotorterminals
Cautions:
1. Whenthemotorisrunning,theheatsinkbecomeHOT.DONOTtouchit.Donotleavemotor runningforalongtime,lessthan5minutesisagoodidea. 2. TheheatsinkconnectstoDarlingtonpairscollatorpin.DONOTshorttwoheatsinks. 3. Themotorspecification: Voltagerange:12V NormalVoltage:7.2V Normalloadcurrent:2.9A Duetothemotorsbeingold,theparametersfordifferentindividualmotorswillnotbethesame.