Professional Documents
Culture Documents
http://www.red-bag.com/engintools/wallthickshell.php
Today is Tue, Nov 29th, 2011 Engineering Tools > Wall Thickness Shell
Wall Thickness
Type of shell Design pressure Design temperature Material description Select yield stress and specific gravity from material database > Yield stress, design temperature Specific gravity Outside diameter Length tangent to tangent Nominal wall thickness Corrosion allowance Tolerance Joint efficiency Semi angle at apex cone Design Code Do L t Ca tol E S N/mm2 kg/m3 mm mm mm mm mm degree (For cone only) (ASME, Dutch R., PED) (If not a sphere) P T N/mm2
0
( = 1 MPa = 10 Bar )
Galperti Manufacturer
A Variety of Flanges from 2" to 96" Highest Quality Flange Products
www.Galperti-am.com
Engineering Management
Your Engineering Management PhD Online. Request for Information!
WaldenU.edu/Engineer
Note: Without warranty and for estimating purposes only. Results should be checked and approved by qualified engineer.
Wall thickness calculation of Cylinder according ASME Allowable stress Corroded thickness Cylinder: Do - tc = 2 P*R = S*E - 0.6*P 2910 -4= 2 0.1 * 1451 150*1 - 0.6*0.1 0.968 + 0 + 0 = 150 * 1 * 4 1451 + 0.6 * 4 = = S= tc = t - Ca - tol = 150 = 4-0-0= 150.00 N/mm 4.00 mm
2
Corroded inside radius Required wall thickness Nominal required thickness Max. Allowable Working Press. Thickness analysis, t > trn ? Weight Enclosed volume
R= tr =
1508.19 kg 39.024 m
3
1 de 1
28/11/2011 20:52