Professional Documents
Culture Documents
9402a2803df0c0c2eb651732092f0185
9402a2803df0c0c2eb651732092f0185
The surfaces marked red below should be cleaned with the supplied brushes.
Caution! Only special Hilti safety cartridges bearing the imprint DX450 / DX350 may be used for safety reasons.
Only a clean tool is in good working order. The pads shown below should thus be cleaned each day, the housing each week.
The same applies after a large number of fasteners have been driven (approx.
2,s00).
piston
inside housing
ffisfr
Before reassembling lubricate all parts sparingly with Hilti spray. Note: Use only genuine Hilti spray.
Tool kit
DX450 tool, complete with
kit comprising:
1 baseplate assembly
so
1 spares
09355/9
(:::),@sry:e:s
45/S
1
00731
/0
'1
5tc32
'1
05206/8
45tF't
00729/4
flat brush
pack
1 cleaning cloth
SN
09354/2
1 safety goggles
1 piston
45/NK
oo748/4
3/T69
slii:ili.]:]:.]:].1.]]::::].':'i:;6::].'
1 Hilti lubricant
5/C31 59082/8
05205/O
03206/0
.1
oo254/3
Spare parts
baseolate 45lS
00731
1
stop ring
piston 45lNK
piston guide
/0
00729/4
00855/7
00748/4
o0728/6
f.+*----ffi.E
Power regulation
The driving power is adjusted by means of a knurled wheel on the side of the tool. When the indicator is in the rearmost position the greatest driving power is obtained from a cartridge, in the foremost position the lowest driving power is obtained. Thanks to this means of power regulation only two cartridge power levels are required.
I
I
Note: The red cartridge covers 90 "/" ol all applications. The black cartridge is needed for the special fastening of steel to steel.
Warranty
Hilti DX Tools Hilti Fasteners Hilti Cartridges
are integral parts of a technical system. Their combined functions make for optimum safety and quality. Hilti powderactuated tools are covered by a S-year warranty from the date of invoice for deficiencies in material or manufacture which cause premature wear or breakdown of the tool. This warranty coverage will be upheld if the tool is operated
correctly in accordance with the operating instructions, if the tool is cleaned and serviced properly and the technical system is maintained. This means that only Hilti fasteners, Hilti power loads and Hilti spare parts or other products of equivalent quality may be used in the tool. Under the terms of this warranty, excluding any other further claims, defective parts, which must be submitted to the Hilti marketing organization in question, will be replaced free of charge. Parts subject to normal wear and tear are not included in this warranty.
Hilii@
1989