Professional Documents
Culture Documents
Jtc200 Worm Gear Lift Jack Descriptions
Jtc200 Worm Gear Lift Jack Descriptions
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195 Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195 Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
1. Jack Series JT: "Jacton" brand screw jack C series cubic screw jack 2. Load Capacity 200: lifting force 200kN, please check above JTC200 worm gear lift jack technical parameter table. 3. Screw Configuration & Mounting Orientation US: Upright translating screw UK: Upright keyed screw UR: Upright rotating screw
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195 Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
4. Travel Stroke 2000, means travel stroke 2000mm. We processing screw jack spindle length following customers requirements. JTC200 worm gear lift jack maximum stroke 3000 mm.
200. Gear Ratio JTC200 worm gear lift jack gear ratios include 1/10, 1/40. H: High gear ratio 1/10, 1mm stroke per full turn of input worm shaft. L: Low gear ratio 1/40, 0.25mm stroke per full turn of input worm shaft. 6. Lifting Screw Top Ends Types JTC200 worm gear lift jack standard lifting screw top ends types include top plate, clevis end, threaded end, forked head and plain end. Also processing lifting screw top ends following customers design drawings. I: Top Plate III: Threaded End VI: Plain End Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195 Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack II: Clevis End IV: Forked Head
7. Worm Shaft Input Types A: left side worm shaft input. B: right side worm shaft input. C: double worm shaft input. M1: left side motor flange direct input. M2: right side motor flange direct input. M3: left side motor flange direct input, right side worm shaft input. M4: right side motor flange direct input, left side worm shaft input.
8. Accessories N: no accessory BG: miter gearbox GR: gear reducer DC: digital counter PB: pillow block bearing PP: protective pipe HW: hand wheel LS: limit switches SP: swivel plate FC: flexible coupling BB: bellows boot EM: electric motor SN: stop nut SM: swivel mounting base CS: connecting shaft
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195 Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195 Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack