Professional Documents
Culture Documents
DESCRIPTION
Cola®Lube 3410, an ashless, oil soluble, complex long chainlength aliphatic phosphate
ester, provides outstanding extreme pressure (EP), anti-wear, lubricity, and corrosion
inhibition properties in a variety of metalworking fluid formulations. While developed for
use in severe drawing and stamping applications, it can be readily utilized in synthetic,
semi-synthetic, soluble oil and straight oil based systems for use in ferrous, non-ferrous,
and stainless steel metalworking. Also, it is effective in increasing the OK Timken Load
in gear oils. Cola®Lube 3410 is supplied in the free acid form and contains no heavy
metals.
A guide to follow for replacing a chlorinated paraffin is to work on a one for one basis,
Cola®Lube 3410 for % Chlorine. An example, a cutting oil contains 6% of a 50%
Chlorinated Paraffin bringing to the formula 3% Chlorine, therefore, one would substitute
in the product, 3% Cola®Lube 3410.
Cola®Lube 3410 is recommended for all metalworking applications, and has successfully
replaced chlorine at levels up to 15% in the formulations. Levels of chlorine above 15%
should be formulated carefully.
____________________________________________________________________________________________________________
Colonial Chemical, Inc. * 225 Colonial Drive * South Pittsburg, TN 37380 * Phone 423/837-8800 Fax 423/837-3888
COLA®LUBE 3410 PAGE 2
PERFORMANCE DATA
Drawbead Test
®
The effectiveness of Cola Lube 3410 in reducing the force required to pull a cold rolled steel
strip through a 3 beaded die is illustrated below.
NOTE: A lower drawbead efficiency number corresponds to an additive more effectively
reducing this force.
Test Conditions: Metallurgy-Strip…Cold Rolled Steel 1008-1010, Clamping Force…100 Lbs.,
Speed…155-165 Inches/Minute, Pulling Force…Up to 10,000 Lbs.
COLALUBE 3410
140
Draw Bead Efficiency
____________________________________________________________________________________________________________
Colonial Chemical, Inc. * 225 Colonial Drive * South Pittsburg, TN 37380 * Phone 423/837-8800 Fax 423/837-3888
COLA®LUBE 3410 PAGE 3
TYPICAL PROPERTIES
Appearance Clear Brown Liquid
Acid Value (pH 5.0) 60
Specific Gravity (25°C) 0.98
% Activity 100
TYPICAL FORMULATIONS
Oil Based Drawing/Stamping Fluid Heavy Duty Synthetic Drawing/Stamping Fluid
Cola®Lube 3410 provides lubricity, This formulation is ideal for stamping hot or cold
EP and contributes to the corrosion protection rolled steel.
properties in this heavy-duty stamping/drawing % by weight
fluid. Cola®Lube 3410 15.0
% by weight Triethanolamine (99%) 30.0
Paraffinic Oil (300SUS/100) 90.0 Cola®Lube 3414 20.0
Cola®Lube 3410 10.0 Water 35.0
100.0 100.0
Falex® EP Test Procedure Procedure: Add in the order listed with agitation.
WARRANTY
Colonial Chemical guarantees that its products meet published specifications.
No other warranties or guarantees are expressed or implied because the use of
this material is beyond the control of Colonial Chemical.
____________________________________________________________________________________________________________
Colonial Chemical, Inc. * 225 Colonial Drive * South Pittsburg, TN 37380 * Phone 423/837-8800 Fax 423/837-3888