Professional Documents
Culture Documents
S.No. FFS Clarifications Reply
S.No. FFS Clarifications Reply
FFS clarifications
1 No. of standby pump selection for hydrant/spray based on which std/criteria. For a service consists of how many no. of electric driven & diesel driven & specifiy the std for selecting. Pls clarify the TAC clasue 7.4.1.7 As per TAC 7.4.1.4.1, total hydrant pumping capacity not exceed 1092 m3/hr . However our projects exceeding the capacity.... ? pls clarify. When Booster pumps required if pump head exceeding 88 mwc as per TAC or any other
Reply
6 7 8 9
For conveyors, Simultaneous operations of 3 zones demand equivalent to pumping capacity are the max. Demand for spray system. This clause based on which std What is the procedure for selection of K-factor & total nozzles per system Initially how we select Hydro pneumatic tank capacity Delivery pressure of foam system obtained by water pump only or it require foam pump & how can we find the foam pump head In compressor selection, the following case is considered based on which std. (i) To pressurise 1/3 volume of hydro-pneu tank from atm pressure to system pressure with in 4 hours In NFPA-2001, design concentration of class A & B fires only available. For class C fires where can we refer
For Design of Fire Extinguishers the following standards are used IS:2171, IS:2878, IS:940. However some of them using IS:15683. What is the difference ..?
10 11
Reply
Day tank may not be required when fuel oil tanks located close to boiler.
How to find the total Fuel oil requirements (both HFO & LDO) for a plant or any std available to consider no. of startup & working hours to find the fuel oil requirement.