You are on page 1of 1

BOLYMIN

BACK LIGHT
CCFL : driven from backlight connector by ac450v/80KHZ, 5v DC can be converted to AC 450V/80K HZ by a CCFL- INVERTER EL : driven from A,K directly ( on right or left side of PCB) by AC 110V/400HZ, 5v DC can be convertd to AC 110V/400 HZ by a EL-INNERTER LED : 1. driven from interface pin (15, 16 as in character LCM) by 4.2v DC. If providing 5v DC, please put a limited resistor on RL ( 3~6 ohm) 2. driven from A, K directly (on right side or left side of pcb) by 4.2v 3. driven from Logic Vdd and Vss ( interface pin 1 and pin 2). Must put a limited resister on RL.

LED (Light Emitted Diode)


CONSTRUCTION = Direct lighting type:
DIFFUSER BEZEL PCB LCD

Life Charateristics Electrical Characteristics (Beference Data)


forward current derating curve
Forward Current(IF) 100%

RIBBER LED DRIVER IC LED SUBSTRATE

20% 25 Temperature

-20

70

EL (Electro Luminescent)
CONSTRUCTION
EL BEZEL PCB LCD Initial Brightness Ratio (%) 100 Ambient Condition : 20 70% RH

Life Charateristics

Constant Voltade / Frequency Drive Inverter Drive 100V/50Hz

RUBBER LCD'S DRIVER IC

50 Inverter 100V/700Hz 100V/400Hz

2500

5000

7500

10000 Time(h)

CCFL (Cold Cathode Fluorescent Lamps)


CONSTRUCTION
DIFFUSER LCD C.C.F.L BEZEL Variation ratlo RUBBER 110 100 90 80 70 60 50 40 30 20 10 0 0

Life Charateristics
Lift time test (brightness)

PCB HOLDER

REFLECTOR LIGHT GUIDE

10

unit:thousand

LED (Light Emitted Diode)


L UMINOUS INTENSITY EMITTED COLOR DRIVING VOLTAGE LIFETIME THICKNESS
Module:5~50(cd/m ) LED only:30~400(cd/m2) Yellow, Yellow Green , Green, Amber, Red DC 4.2v About100,000hrs Direct Lighting Type:4.5mm-5.5mm Edge Lighting Type:1-3mm
2

EL (Electro Luminescent)
Module:10~30(cd/m ) EL only:40~150(cd/m2) White, Blue, Green AC 100V/400Hz 3,000~8,000hrs
2

CCFL (Cold Cathode Fluorescent Lamps)


Module:50~100(cd/m ) EL only:500~800(cd/m2) White AC 450V/Max. 80kHz 15,000hrs
2

0.3~0.7mm

3.0~5.0mm

You might also like