Professional Documents
Culture Documents
Construction: Core Tube: Max. Min. Min. Polyester elastomer Working Burst Bend Pressure Reinforcement: Pressure Pressure Radius Weight One braided layer of high DN size mm inch mm Part No. MPa / psi MPa / psi mm kg/m tensile steel wire Cover: Polyurethane, black Applications: 2040H-03V10 5 -03 4.7 3/16 9.8 34.0 4,930 136.0 19,720 30 0.12 High pressure service for use 2040H-04V10 6 -04 6.3 1/4 11.9 31.0 4,495 124.0 17,980 40 0.17 with petroleum or synthetic hydraulic fluids in hydraulic 2040H-05V10 8 -05 8.2 5/16 14.0 25.0 3,630 100.0 14,500 50 0.21 systems. Excellent fexibility 2040H-06V10 10 -06 9.7 3/8 15.9 24.0 3,480 96.0 13,920 60 0.26 due to the excellent bonding of the core tube, pressure 2040H-08V10 12 -08 12.8 1/2 19.3 18.5 2,685 74.0 10,730 75 0.31 reinforcement and cover. 2040H-10V10 16 -10 16.0 5/8 23.5 14.0 2,030 56.0 8,120 110 0.43 Especially suitable for lifting devices, machine tools 2040H-12V10 20 -12 19.4 3/4 26.7 12.5 1,815 50.0 7,250 170 0.53 and agricultural machinery 2040H-16V10 25 -16 25.0 1 33.5 10.0 1,450 40.0 5,800 230 0.72 Fittings: Temperature range: -40C up to +100C for petroleum, max. 57C for synthetic hydraulic fluids Please refer to column and water-based hydraulic fluids. Fittings. For detailed information see section K. Change in length: +1% / -3 % at working pressure Also available as multiline or twin hose, see page J2.
Fittings
PX PX PX PX PX PX PX PX
Construction: Min. Min. Max. Core Tube: Working Burst Bend Polyamide Pressure Pressure Radius Weight FitPressure Reinforcement: DN size mm inch mm MPa / psi mm kg/m tings Part No. MPa / psi One braided layer of high tensile aramid fibre Cover: Polyurethane, black, 520N-3 5 -03 4.8 3/16 10.9 34.5 5,000 138.0 20,000 38 0.07 55/56 pinpricked 520N-4 6 -04 6.3 1/4 13.0 34.5 5,000 138.0 20,000 51 0.10 55/56 Applications: High pressure service for 520N-5 8 -05 7.9 5/16 14.5 31.0 4,500 124.0 18,000 64 0.12 55/56 use with petroleum or syn520N-6 10 -06 9.5 3/8 16.5 27.5 4,000 110.0 16,000 64 0.12 55/56 thetic hydraulic fluids in hydraulic systems as well 520N-8 12 -08 12.7 1/2 20.6 24.0 3,500 96.0 14,000 102 0.20 55/56 as with gases. Low volume520N-10 16 -10 15.9 5/8 23.4 19.0 2,750 76.0 11,000 152 0.26 55/56 tric expansion and small outer diameters due to the Temperature range: -40C up to +100C for petroleum or synthetic hydraulic fluids. aramid fibre reinforcement. Change in length: +/- 2% at working pressure Fittings: Also available as twinline or multiline hose, see page J2. Please refer to column Fittings. For detailed information see section K. Note: 56 series is the recommended fitting type, as the availability of 55 series will be limited in the future.
E4
Catalogue 4460-UK