Professional Documents
Culture Documents
Install PNMT (WinXP)
Install PNMT (WinXP)
P N M T
ASOLINK
ETWORK
ANAGEMENT
ERMINAL
NEC Corporation
Copyright 2006
ROI-S05931
Table of Contents
1. 2. 3. 4. 4 5 6 Installation Sequence ............................................................................................................................ 1 Phone and Modem Options Setting (Standard 19.2Kbps Connection) ............................................ 2 Installation of USB Com Port Driver (USB Connection)................................................................... 7 Dial-up Setting ..................................................................................................................................... 10 SNMP Service Setting ......................................................................................................................... 20 PNMT Setup ........................................................................................................................................ 25 Launching PNMT ................................................................................................................................ 30
-i-
ROI-S05931
1.
Installation Sequence
Network Element (NE) other than PASOLINK NEO Standard 19200bps Modem Setting (Phone and Modem Options Setting)
PASOLINK NEO ONLY USB Modem Setting (Installation of USB Com Port Driver)
-1-
ROI-S05931
2.
(2)
Click the Phone and Modem Options icon in the Control Panel window to start configuring the modem.
-2-
ROI-S05931
(3)
Enter your country and area code in the Location Information window. Click [OK].
(4)
-3-
ROI-S05931
(5)
Select the Modem tab. Click [Add] to continue with adding the new modem for the PNMT.
(6)
-4-
ROI-S05931
(7)
Select Standard Modem Types from the list of Manufacturers and Standard 19200bps Modem from the Models. Click [Next] to continue.
(8)
-5-
ROI-S05931
(9)
(10) Verify that Standard 19200 bps Modem and COM1 are displayed. Click [OK].
-6-
ROI-S05931
3.
(2)
Select Install from a list or specific location [Advanced] and click on [Next].
-7-
ROI-S05931
(3)
Insert the USB driver CD-ROM in the computers disk drive and select Search for the best driver in these locations and check Search removable media [floppy, CD-ROM ...] then, click [Next].
(4)
-8-
ROI-S05931
(5)
(6)
-9-
ROI-S05931
4.
Dial-up Setting
(1) Click Start | Settings | Control Panel and the Network Connections icon to start configuring the Dialup setting.
(2)
The Network Connections window appears. Click Create a new connection in the Network Tasks area.
- 10 -
ROI-S05931
(3)
The Welcome to the New Connection Wizard window appears. Click [Next].
(4)
- 11 -
ROI-S05931
(5)
(6)
Select Modem USB Modem Driver [COM#] and click [Next] to continue. NOTE This screen appears only when a USB Modem Driver has been installed.
- 12 -
ROI-S05931
(7)
In the New Connection Wizard window, enter Pnmt in the Company Name field and click [Next] to continue.
(8)
Enter any number in the Phone number field and click [Next] to continue.
- 13 -
ROI-S05931
(9)
Verify that Pnmt is displayed as the connection. You can also create a shortcut on your desktop if desired. Click [Finish].
(10) In the Connect Dial-up Connection window, click [Cancel] to continue. Click Properties in the Connect Dial-up Connection window.
- 14 -
ROI-S05931
(11) Verify that Modem-Standard 19200 bps Modem [COM1] is displayed on the General tab in the Dial-up Connection Properties window. Click [Configure].
- 15 -
ROI-S05931
(13) Retain the default setting on the Options tab and click the Security tab.
(14) Retain the default setting on the Security tab and click the Networking tab.
- 16 -
ROI-S05931
(15) On the Networking tab, verify that PPP ... is`displayed in the Type of dial-up server I am calling field and uncheck File and Printer ... and Client for Microsoft....
(16) Click Settings Uncheck all the boxes in the window that appears, as shown below. Click [OK] to go back to the previous window. Highlight Internet Protocol (TCP/IP) and then click [Properties].
- 17 -
ROI-S05931
(17) Verify that both Obtain an IP address automatically and Obtain DNS server address automatically are selected.
(18) In the Advanced TCP/IP Settings window, uncheck Use IP header compression for the PPP link. Click [OK].
- 18 -
ROI-S05931
(19) Retain the default setting on the Advanced tab and click [OK].
- 19 -
ROI-S05931
(2) The Windows Components Wizard window appears. Remove the check from Management and Monitoring Tools, and then click Details ...
- 20 -
ROI-S05931
(3) The Management and Monitoring Tools window appears. Confirm that Simple Network Management Protocol is not checked and click [OK]. Return to above window and click [Next].
- 21 -
ROI-S05931
To Stop SNMP Service: (5) To stop SNMP Service without removing it, click Administrative Tools in the Control Panel window.
- 22 -
ROI-S05931
(7) Confirm that SNMP Service is installed and it has started automatically. Select Action Properties on the menu bar in the Services window, or right-click SNMP Service and then click Properties in the SNMP Service pop-up menu..
(8) Select Manual in the Startup type field and click Stop in the Service status field on the General tab. Click [OK] or [Apply].
- 23 -
ROI-S05931
(9) Confirm that the Status of both SNMP Service and SNMP Trap Service is stopped, and that the startup condition for each one is Manual.
- 24 -
ROI-S05931
PNMT Setup
NOTE If PNMT software has already been installed, please uninstall it before you install a new version. (1) Insert the PNMT Installation CDROM. Open the CDROM folder and double-click setupwin32.exe.
- 25 -
ROI-S05931
(4) Specify the directory in which the PNMT is to be installed. Click [Next].
NOTE The default path is C:\PNMTj. It is not possible to include blank spaces as in Program Files.
- 26 -
ROI-S05931
NOTE If no License Key is available, operation in Trial mode is possible. Simply leave the License Key field blank and proceed.
IMPORTANT: IMMEDIATE IMPORT OF LICENSE You may use the PNMT on a trial basis for 30 days. After that the PNMT can ONLY be used IF the license has been imported (activated). To obtain the license please contact NEC.
- 27 -
ROI-S05931
(6) Specify the directory for storing PNMT log files. Click [Next].
NOTE The default path is <PNMTj Install Directory> when a Stored Directory is not specified. It is not possible to include blank spaces as in Program Files.
- 28 -
ROI-S05931
- 29 -
ROI-S05931
Launching PNMT
(1) Click Start | Programs |PNMTj |PNMT to start the application.
(2) If he following window appears, select [Unblock] (when using the Windows XP SP2 Firewall).
- 30 -
ROI-S05931
(3) Enter User name and Password, and Select the Connection Entry. After installation of the PNMT, the initial password will be:User name: Password: admin (There is no initial password. Just press Enter. A password can then be set.) Connection: Select Dial-up and Pnmt entry. NOTE If another application is using the SNMP Port, application initialization will not be possible, the application will shut down, and the following message will appear.
- 31 -