Professional Documents
Culture Documents
Mullen Cable Bender
Mullen Cable Bender
Condux’s sole liability and the purchaser’s sole remedy for a failure of goods
under this limited warranty, and for any and all claims arising out of the
purchase and use of the goods, shall be limited to the repair or replacement
of the goods that do not conform to this warranty.
CONDUX
Condux International, Inc. • P.O. Box 247 • 145 Kingswood Road • Mankato, MN 56001 USA
1-507-387-6576 • 1-800-533-2077 • FAX 1-507-387-1442
Internet: http://www.condux.com • e-mail: cndxinfo@condux.com
5 Blue Heron Drive Collegeville, PA 19426 (610) 831-5020 Fax: (610) 831-5012
www.comstarsupply.com
5 Blue Heron Drive
Comstar Supply, INC Collegeville, PA 19426
Think Cable... Think Comstar Phone: 610-831-5020
Fax: 610-831-5012
1-866-326-6782 www.comstarsupply.com
3. Form the cable around the bender. The cable should rest in
the grooves of the bender.
4. Hold the cable tight against the bender to ensure a
proper bend.
5. Leave the bender in place until the lashing process has
been completed.
Grooves
!WARNING: Read and understand all procedure !CAUTION: Wear personal protective equipment:
and safety instructions before using any Condux hard hat, safety glasses, safety shoes, and leather
Mullen Cable Bender. Failure to do so may result in work gloves.
personal injury or property damage. Save this
user’s guide for future reference.
ADVERTENCIA !ADVERTENCIA: Favor de leer y comprender todas !DANGER: Do not use around electrical wires.
las instrucciones de operación y seguridad antes Severe personal injury or death could result.
de usar el Condux Mullen Cable Bender. Si Ud. no
Instrucciones
de Operación comprende las instrucciones favor de consultarle a
su jefe.
5 Blue Heron Drive Collegeville, PA 19426 (610) 831-5020 Fax: (610) 831-5012
www.comstarsupply.com