Professional Documents
Culture Documents
Contents
Introduction
04 Viessmann comprehensive product range for every fuel type and all application areas
Comprehensive range
06 Oil condensing and low temperature oil from 10.3 to 107.3kW
Oil condensing boilers 10.3 to 107.3kW Oil low temperature technology 18 to 100kW
10
Gas condensing and low temperature gas boilers from 1.6 to 900kW
Gas adsorption heat pump, 1.6 to 10/15kW Gas condensing boilers 1.6 to 60kW, as multi boiler system up to 900kW Low temperature gas technology, 10.5 to 144kW
18
26
2/3
30
70
72 34 Biogas plants
Schmack supplier of complete biogas technologies Dry fermentation according to the BIOFerm system At Viessmann, the gas injection specialist is called Carbotech
74
Services
76 Attractive offers for our trade partners: ViessmannAcademy, websites, apps, software 78 80 The Viessmann Academy Vitodesk: Software competence from a single source, essential for heating contractors 82 Building Energy Economy Check Viessmann expert forum
40
48
83
The company
84 Viessmann climate of innovation
60 Control technology
Vitotronic control units System overview control units and application areas
66 Data communication
TeleControl remote monitoring and remote control Note: All new products and modications compared to previous models are printed in red in the summaries of the individual product categories.
Comprehensive range
4/5
Viessmann comprehensive product range for every fuel type and all application areas
Viessmann offers top technology and sets new benchmarks
The comprehensive range of products and services from Viessmann offers individual solutions with efficient systems for all application areas and energy sources. The comprehensive product range from Viessmann offers top technology and sets new benchmarks. With its high energy efficiency, this range contributes to reducing heating bills and is also the right choice in ecological terms. For decades, the company has been supplying highly efficient heating systems for oil, gas and biomass with clean combustion, as well as solar thermal systems and heat pumps. All Viessmann products meet the requirements of European Directives regarding the reduction of environmental pollution by emissions. Viessmann feels a long-standing responsibility to protect the environment and to preserve natural resources to the fullest extent. To this end, the company employs the best available technology for the generation of heat.
Individual and efficient solutions Viessmann offers the right heating system for every requirement wall mounted or oorstanding, in individual combinations all are futureproof and economical. It makes no difference whether you need a system for detached or two-family houses, for large residential buildings, for commerce and industry, or for local heating networks, or whether the system is intended for modernisation or new build. The performance spectrum offered by the Viessmann Group includes: Boilers for oil or gas up to 116MW heat or 120t/h steam Solar thermal systems Photovoltaic systems Heat pumps up to 2MW Wood combustion technology up to 50MW Combined heat and power generation up to 50 MWel Biogas production plants from 18kWel to 20MWgas Biogas upgrading plants up to 3000m3 /h Air conditioning technology Heating system accessories Services Viessmann is highly specialised in every one of these market segments. Compared to specialist suppliers, the company offers a distinct advantage: Viessmann understands heating technology as a systematic whole and guarantees professional, unbiased advice on technology and fuel type.
Comprehensive range
6/7
Oil condensing and low temperature oil boilers from 10.3 to 107.3kW
The efficient condensing technology takes care of the careful handling of the precious energy source, fuel oil.
Crude oil is a raw material that will only continue to be available for a limited time. However, crude oil reserves that are viable to be recovered today should still last for another 40 years, even taking the development of consumption trends over the coming decades into account. In other words, fuel oil will still be available far beyond the useful life of a new oil heating system. Apart from that, there is no alternative to the frugal handling of this precious fuel. Advanced condensing technology offers a solution that, with an efficiency factor of up to 98percent [to DIN], achieves the highest level of energy efficiency. Oil condensing boilers from Viessmann are already prepared for alternative sustainable fuels and can be operated with bio-oil mixtures. Viessmann offers a comprehensive range for oil in three categories, including highly efficient low temperature and condensing boilers in cast iron and steel, as both oorstanding and wall mounted versions. Highly efficient condensing technology Permanent maximum energy utilisation is guaranteed by the oorstanding and wall mounted oil condensing boilers from Viessmann. Only stainless steel heat exchangers are used for additional energy recovery from the condensation of hot gases. The Inox-Radial heat exchanger, with its laminar heat transfer principle, achieves the highest energy efficiency.
The use of highly alloyed stainless steel makes the heating surfaces permanently resistant to corrosion and material wear, independent of the actual fuel oil quality. The smooth stainless steel surfaces prevent deposits and the self-cleaning effect is also assisted by the vertical layout and correctly aligned ow of the hot gases and condensate. In the output range from 10.3 to 28.9kW, Vitoladens300-C condensing boilers are available with a stepped or modulating Compact blue ame burner. The burner adjusts its output to the prevailing heat demand and is extremely frugal and quiet, aided by its internal silencer. The blue ame burner enhances the utilisation of condensing technology in partial load operation and ensures clean combustion. Today, oil condensing boilers are already prepared for the use of bio-oil. Multi mode storage combi boilers with solar central heating backup Multi mode oil condensing storage combi boilers for solar central heating backup in regions with variable solar yield are factoryassembled and can be installed quickly.
10-year guarantee
on all stainless steel heat exchangers for oil or gas condensing boilers up to 150kW
Comprehensive range
Condensing technology
VITOSOLAR 300-F Oil condensing storage combi boiler for solar DHW heating and central heating backup (with a Vitoladens300-W) Type VP3C With 2-stage Compact blue ame burner 12.919.3 and 16.123.5kW Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 104% (Hi) [net cv] Heating water buffer cylinder: 750l Oil condensing storage combi boiler Type VP3U With 2-stage Compact blue ame burner 12.919.3 and 16.123.5kW Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 104% (Hi) [net cv] Cylinder capacity: 130l Available in: DE, AT, BE, CH, FR, LU, PL
VITOLADENS 333-F
Available in: DE, AT, BE, CH, CZ, DK, FR, IT, LU, PL
VITOLADENS 300-W Wall mounted oil condensing boiler Type VP3C With 2-stage Compact blue ame burner 12.919.3 and 16.123.5kW Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 104% (Hi) [net cv]
Available in: DE, AT, BE, CH, CZ, DK, FR, IT, LU, PL
VITOLADENS 300-C
Oil condensing boiler Type J3RA With modulating Compact blue ame burner 10.319.3, 10.323.5, 12.928.9kW Type BC3 with 2-stage Compact blue ame burner 12.919.3, 16.123.5, 19.328.9kW Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 104% (Hi) [net cv] Oil condensing boiler Type VW3B 35.4; 42.8; 53.7kW Standard seasonal efficiency [to DIN]: Up to 97% (Hs) [gross cv] / 103% (Hi) [net cv]
Available in: DE, AT, BE, CH, CZ, DK, FR, IT, LU, PL Available: 09/2013
VITOLADENS 300-T
Available in: DE, AE, AT, BE, CH, CZ, DK, FR, IT, LU, PL, SI
8/9
VITORONDENS 222-F Oil condensing storage combi boiler Type BS2A 20.2, 24.6, 28.9kW Standard seasonal efficiency [to DIN]: Up to 97% (Hs) [gross cv] / 103 % (Hi) [net cv] Cylinder capacity: 130l (20.2 and 24.6kW) 160l (28.9kW) VITORONDENS 200-T Oil condensing boiler Type BR2A 20.2, 24.6, 28.9, 35.4, 42.8, 53.7kW Type J2RA 67.6, 85.8, 107.3kW Standard seasonal efficiency [to DIN]: Up to 97% (Hs) [gross cv] / 103% (Hi) [net cv]
Available in: DE, AE, AT, BE, CH, DK, FR, IT, LU, PL, RU, SI, UA
Available in: DE, AE, AT, BE, CH, DK, FR, IT, LU, PL, RU, SI, UA
VITOROND 111
Oil cast iron boiler with DHW cylinder 18, 22, 27kW Standard seasonal efficiency [to DIN]: 89% (Hs) [gross cv] / 94.5% (Hi) [net cv] Cylinder capacity: 130l (18kW) 160l (22 and 27kW) Oil cast iron boiler 18, 22, 27, 33, 40, 50, 63, 80, 100kW Standard seasonal efficiency [to DIN]: 89% (Hs) [gross cv] /94.5% (Hi) [net cv]
VITOROND 100
Available in: AE, AT, BE, CH, CN, DK, ES, FR, GB, HR, IT, LT, RO, RS, RU, SE, SI, TR, UA
Comprehensive range
10/11
Gas condensing and low temperature gas boilers from 1.6 to 150kW, as multi boiler system up to 900kW
With an advanced condensing boiler from Viessmann, gas consumption can be reduced by up to 30percent.
Viessmann gas condensing boilers achieve a conversion of almost 100 percent of the fuel into usable heating energy. Compared to an old heating system, an advanced condensing boiler can reduce gas consumption by up to 30percent. Permanently high efficiency with condensing technology High-alloy stainless steel is used for all condensing boilers and heat exchangers. That translates into permanent protection against corrosion and material wear. Inox-Crossal and Inox-Radial heat exchangers ensure highly efficient heat transfer during the entire operation. The modulating MatriX gas burners and MatriX cylinder burners ensure clean combustion with particularly low NOx emissions. Heating with gas and natural heat The Vitosorp200-F gas adsorption heat pump combines the benets of heating with gas and those of utilising natural heat. The combination of gas condensing boiler and adsorption heat pump reduces gas consumption by around 25percent, compared with conventional condensing technology. This raises the seasonal efficiency [to DIN] up to 134percent (Hi) [net cv]. This saves fuel and protects the environment. The Vitosorp200-F heating centre is particularly suitable for detached and twofamily houses. The wide modulation range of 1:9 (1.6 to 15kW) also makes this appliance suitable for low energy and passive houses.
Powerful right up to 150kW Where the highest efficiency and longest service life are required, stainless steel is the rst choice. Never has this applied more, than to the Vitodens200-W in the upper output range. This new heating centre, with its output of 125 and 150kW, was specically designed for commercial applications. Condensing cascade up to 900kW Up to eight wall mounted Vitodens200-W can be linked in a cascade offering an output of up to 900kW. Multi mode storage combi boilers with solar central heating backup Multi mode gas condensing storage combi boilers for solar central heating backup in regions with variable solar yield are factoryassembled and can be installed quickly. Intelligent combustion control A Lambda Pro Control automatically matches the combustion to changing gas qualities and operating conditions, and ensures consistently high efficiency. With this combustion technology, wall mounted condensing boilers from Viessmann are already prepared for the use of biogas.
10-year guarantee
on all stainless steel heat exchangers for oil or gas condensing boilers up to 150kW
Comprehensive range
12/13
Condensing technology
VITOSOLAR 300-F Gas condensing storage combi boiler for solar DHW heating and central heating backup (with a Vitodens300-W) Type B3HA 1.911, 1.919, 426, 435kW Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 109% (Hi) [net cv] Heating water buffer cylinder: 750l Available in: DE, AT, BE, CH, FR, PL Available: 04/2013
VITODENS 343-F
Gas condensing storage combi boiler with stainless steel solar cylinder Type B3UA 1.911, 1.919kW Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 109% (Hi) [net cv] Cylinder capacity: 220 l
Available in: DE, AT, BE, CH, CZ, DK, FR, IT, LU, PL, SK
VITODENS 333-F
Gas condensing storage combi boiler with stainless steel primary store Type B3TA 1.911, 1.919, 426kW Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 109% (Hi) [net cv] Cylinder capacity: 100l
Available in: DE, AT, BE, CH, CZ, DK, FR, IT, LU, PL, SE, SK
VITODENS 300-W
Wall mounted gas condensing boiler (system boiler) Type B3HA 1.911, 1.919, 426, 435kW Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 109% (Hi) [net cv]
Available in: DE, AT, BE, CH, CZ, DK, FR, IT, LU, PL, SK
VITOCROSSAL 300 Gas condensing boiler Type CU3A 5.219, 5.226, 735, 1245, 12 60kW Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 109% (Hi) [net cv]
Available in: DE, AT, BE, CH, CZ, DK, FR, IT, LU, PL, RO, RU, SK Available: 04/2013
Comprehensive range
Condensing technology
VITOSOLAR 300-F Gas condensing storage combi boiler for solar DHW heating and central heating backup (with a Vitodens200-W) 3.213, 3.219, 5.226, 5.235kW High efficiency [HE] pumps for solar and heating circuits (A-rated) Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 109% (Hi) [net cv] Heating water buffer cylinder: 750l VITOSOLAR 200-F Gas condensing storage combi boiler with heating water buffer cylinder for solar central heating backup and DHW heating Type B2VA 4.819, 6.526kW Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 109% (Hi) [net cv] Heating water buffer cylinder: 220l Available in: DE, AT, BE, CH, FR, PL Available: 04/2013
VITODENS 242-F
Gas condensing storage combi boiler with solar cylinder Type B2UA 3.213, 3.219, 5.226kW HE pump (A-rated) Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 109% (Hi) [net cv] Cylinder capacity: 170l Gas condensing storage combi boiler Type B2TA with primary store: 3.213, 3.219, 5.226, 5.235kW Cylinder capacity: 100 or 130l Type B2SA with DHW cylinder with internal indirect coil: 3.213, 3.219, 5.226kW, 130l HE pump (A-rated) Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 109% (Hi) [net cv] Wall mounted gas condensing boiler with integral stainless steel primary store Type B2LA 3.213, 3.219, 5.226, 5.235kW HE pump (A-rated) Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 109% (Hi) [net cv] Cylinder capacity: 46l
Available in: BE, CZ, EE, FR, GB, HU, IT, LT, LV, PL, SI, SK, TR Available: 04/2013
VITODENS 222-F
Available in: DE, AT, BE, CH, CZ, EE, FR, GB, HR, HU, IT, LT, LU, LV, PL, RO, SE, SI, SK, TR, UA Available: 04/2013
VITODENS 222-W
Available in: DE, AT, BE, CH, CN, CZ, DK, FR, HR, HU, IT, LU, NL, PL, RO, SE, SI, SK, TR Available: 04/2013
VITODENS 200-W Wall mounted gas condensing boiler System boiler (type B2HA): 3.213, 3.219, 5.226, 5.235kW 1745, 1760, 3080, 30100, 32125, 32150kW Modular cascade system up to 900kW Combi boiler (type B2JA): 5.226 / 5.235kW Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 109% (Hi) [net cv]
Available in: DE, AT, AE, BE, BG, BY, CH, CN, CZ, DK, EE, ES, FR, GB, HR, HU, IT, LT, LU, NL, PL, RO, RS, RU, SE, SI, SK, TR, UA Available: 04/2013
14/15
VITODENS 141-E
Gas condensing storage combi boiler with solar DHW heating and central heating backup Type AS1A 7.9 to 26kW Standard seasonal efficiency [to DIN]: 97% (Hs) [gross cv] / 108% (Hi) [net cv] Heating water buffer cylinder: 150l Gas condensing storage combi boiler As built-in model or for outdoor installation Type AB1B 7.9 to 26kW Standard seasonal efficiency [to DIN]: 97% (Hs) [gross cv] / 108% (Hi) [net cv]
Available in: IT
VITODENS 100-E
Available in: IT
VITODENS 111-W
Wall mounted gas condensing boiler With integral stainless steel primary store Type B1LA 6.519, 6.526, 8.835kW Standard seasonal efficiency [to DIN]: 97% (Hs) [gross cv] / 108% (Hi) [net cv] Stainless steel primary store: 46 l
Available in: BE, CN, CZ, FR, GB, HR, HU, IT, NL, PL, RO, SI, SK, TR, UA
VITODENS 100-W
Wall mounted gas condensing boiler System and combi boiler Type WB1C System boiler: 6.5 to 35kW Combi boiler: 26 to 35kW Standard seasonal efficiency [to DIN]: 97% (Hs) [gross cv] / 108% (Hi) [net cv]
Available in: AE, BE, BG, BY, CN, CZ, EE, ES, FR, GB, HR, HU, IT, LT, LV, NL, PL, RO, RS, RU, SI, SK, TR, UA
VITODENS 100-W
Wall mounted gas condensing boiler (heating only boiler) Type WB1B 7.913, 7.916, 7.919, 7.926, 1135kW Standard seasonal efficiency [to DIN]: 97% (Hs) [gross cv] / 108% (Hi) [net cv]
Comprehensive range
VITOGAS 200-F
Gas boiler Type GS2 11, 15, 18, 22, 29, 35, 42, 48, 60kW 72, 84, 96, 108, 120, 132, 144kW Standard seasonal efficiency [to DIN]: 84 % (Hs) [gross cv] / 93% (Hi) [net cv]
Available in: DE, AT, BE, CH, CZ, FR, HR, IT, LU, PL, RO, RU, SI, SK, UA
16/17
VITOPEND 111-W
Wall mounted gas boiler With integral stainless steel primary store Type WHSB 10.5 to 24 (30) kW Standard seasonal efficiency [to DIN]: 82 % (Hs) [gross cv] / 91% (Hi) [net cv] Cylinder capacity: 46l
Available in: BE, BG, CZ, EE, ES, FR, HR, HU, IT, LT, LV, RO, RS, RU, SI, SK, TR, UA
VITOPEND 100-W
Gas combi boiler With high DHW convenience Type WHKB 10.5 to 31kW Standard seasonal efficiency [to DIN]: 82 % (Hs) [gross cv] / 91% (Hi) [net cv]
VITOPEND 100-W
Gas system and combi boiler Type WH1C 10.5 to 36kW Standard seasonal efficiency [to DIN]: 84 % (Hs) [gross cv] / 93% (Hi) [net cv]
Available in: CN
VITOPEND 100-W
Gas combi boiler Type WH1D 10.5 to 31kW Standard seasonal efficiency [to DIN]: 84 % (Hs) [gross cv] / 93% (Hi) [net cv]
Available in: AE, BE, BG, BY, CN, CZ, EE, ES, FR, HR, HU, IT, LT, LV, PL, RO, RS, RU, SI, SK, TR, UA
VITOGAS 100-F
Gas boiler Type GS1D 29, 35, 42, 48, 60kW 72, 84, 96, 108, 120, 132, 140kW, As multi boiler system up to 420kW Efficiency: 90 % (standard boiler)
Available in: AE, BG, CN, EE, HR, LT, LV, PL, RO, RS, RU, UA
Comprehensive range
18/19
Whether oil, gas, wood or natural heat; whether low temperature or condensing technology; whether heating water, low or high pressure steam: with an output spectrum up to 116MW or 120t/h steam, Viessmann offers heating systems that are precisely matched to the individual demand of any residential project, communal building and commercial or industrial complex. For great customer expectations Apart from Vitorond and Vitoplex cast iron and steel boilers, Viessmann supplies Vitocrossal200 and Vitocrossal300 gas condensing boilers, as well as Vitotrans300 ue gas/water heat exchangers and a seamless range of stainless steel condensing technology up to an output of 6000kW. Boilers red by logs, woodchips and pellets, as well as biomass CHP units up to 50MW output, are also part of our range. Now HKB has become a member of the Viessmann Group, we are able to extend our range to include the design and construction of turnkey steam and hot water boiler plants.
This company manufactures boilers with an output of up to 120t/h or 116MW. Higher output can be achieved by linking individual boilers into cascades. Steam boilers are frequently employed in the paper industry and in industrial food processing. They also serve to crack crude oil in reneries and to drive steam turbines for generating power. Hot water boilers are used in district heating networks, in regional energy provision and for heating large factory complexes. Services As well as considerable heating output, commercial and industrial boiler systems also need system-specic solutions and services. Viessmann is the technical pacemaker for efficient energy systems and offers both from a single source. Matching components and systems are individually developed for customers and complemented by a comprehensive range of services.
The multi layered convection heating surfaces of the Vitoplex300 offer high operational reliability and a long service life for the 90 to 2000kW output range.
Comprehensive range
VITOCROSSAL 300 Gas condensing boiler Type CT3B: 187, 248, 314, 408, 508, 635kW With MatriX radiant burner or boiler door for tting a suitable burner (187 to 314kW) With pressure-jet gas burner from ELCO or Weishaupt (408 to 635kW) Standard seasonal efficiency [to DIN]: Up to 98 % (Hs) [gross cv] / 109 % (Hi) [net cv] VITOCROSSAL 300 Gas condensing boiler Type CT3U 135400, 168500, 209630kW With MatriX cylinder burner Standard seasonal efficiency [to DIN]: Up to 98 % (Hs) [gross cv] / 109% (Hi) [net cv]
Available in: DE, AE, AT, BE, CH, CZ, DK, EE, ES, FI, FR, GB, HR, HU, IT, LU, LV, NL, PL, RO, RS, RU, SE, SI, SK, TR, UA
Available in: DE, AT, BE, CH, CN, CZ, DK, ES, FR, GB, HR, HU, IT, LV, NL, PL, RO, RS, RU, SE, SI, SK, TR Available: 04/2013
VITOCROSSAL 300 Gas condensing boiler Type CM3 2987, 38115, 47142kW With MatriX radiant burner Standard seasonal efficiency [to DIN]: Up to 98% (Hs) [gross cv] / 109% (Hi) [net cv]
Available in: DE, AT, BE, CH, CZ, DK, ES, FR, GB, HR, HU, IT, LT, LU, LV, NL, PL, RO, RU, SE, SI, SK, UA
VITOCROSSAL 200 Gas condensing boiler Type CM2 400, 500, 620kW With MatriX cylinder burner Standard seasonal efficiency [to DIN]: Up to 97 % (Hs) [gross cv] / 108% (Hi) [net cv]
Available in: DE, AT, BE, CH, CN, CZ, DK, ES, FR, GB, HR, HU, IT, LT, LV, NL, PL, RS, SE, SI, SK, TR, UA
VITOCROSSAL 200 Gas condensing boiler Type CM2 2987, 38115, 47142, 47186, 82246, 104311kW (As a two-boiler system up to 622kW) With MatriX cylinder burner Standard seasonal efficiency [to DIN]: Up to 97 % (Hs) [gross cv] / 108% (Hi) [net cv]
Available in: DE, AT, BE, CH, CN, CZ, DK, ES, FR, GB, HR, HU, IT, LT, LV, NL, PL, RS, SE, SI, SK, TR, UA
20/21
VITOPLEX 200
Steel oil/gas boiler Type SX2A 90, 120, 150, 200, 270, 350, 440, 560kW 700, 900, 1100, 1300, 1600, 1950kW Standard seasonal efficiency [to DIN]: 89 % (Hs) [gross cv] / 95% (Hi) [net cv]
Available in: DE, AE, AT, BE, BG, CH, CZ, DK, ES, FR, GB, HR, HU, IT, LT, NL, PL, RO, RS, RU, SE, SI, SK, TR, UA
VITOROND 200
Cast iron oil/gas boiler Type VD2A: 125, 160, 195, 230, 270kW Type VD2: 320, 380, 440, 500, 560, 630, 700, 780, 860, 950, 1080kW Standard seasonal efficiency [to DIN]: 88 % (Hs) [gross cv] / 94% (Hi) [net cv]
Available in: DE, AE, AT, BE, CZ, DK, ES, FR, GB, HR, IT, LT, NL, RO, RS, RU, SE, SI, SK, TR, UA
VITOPLEX 100
Steel oil/gas boiler Type PV1 110150, 151200, 201250, 251310, 311400, 401500, 501620, 621780, 781950, 9511120, 11211350, 13511700, 17002000kW Standard seasonal efficiency [to DIN]: 86 % (Hs) [gross cv] / 92% (Hi) [net cv]
Available in: AE, BE, BG, CN, CZ, DK, EE, ES, FR, GB, HR, IT, LT, LV, NL, PL, RO, RS, RU, SK, TR, UA
Comprehensive range
VITOMAX 300-LW
VITOMAX 200-LW
VITOMAX 200-WS
VITOMAX 100-LW
Low pressure hot water boiler Permissible ow temperature up to 110C Type M148: 0.65 to 6MW Permissible operating pressure: 6/10bar Boiler efficiency: 91.5%
22/23
VITOPLEX 100-LS
Low pressure steam boiler Type SXD 0.26 to 2.2t/h Permissible operating pressure: 0.5/1bar Boiler efficiency: 91 %
VITOMAX 200-HS
VITOMAX 100-HS
VITOMAX 200-RS
Waste heat boiler for generating steam Type M03A and M05A 0.3 to 18t/h Permissible operating pressure: 6 to 25bar
Comprehensive range
HKB steam boiler plant with a total output of 120 t/h (SembCorp Utilities, Great Britain)
24/25
HKB is a specialist in the development and manufacture of major turnkey plants for the generation of steam and hot water. The output of each boiler reaches up to 120t/h, operating pressure up to 130bar and hot steam temperatures reach to 485C. Hot water systems deliver up to 116MW. These operate with pressure up to 50bar and deliver hot water up to 250C. For this, bespoke boilers up to ten metres wide and 40metres long, can be built. Individual solutions for international markets Increasing demand from many industrial sectors, the quality of the products and the proximity to the customer has resulted in continuous growth in this market segment. For industrial clients, Viessmann supplies standard Vitomax double ame tube boilers, as well as individually designed major plants. Powerful biomass systems for environmentally responsible steam and hot water generation with low CO2 emissions are also part of our product range.
Assembled and tested components With its direct access to a harbour on the river Maas, HKB can ship its boiler plants, regardless of size, to their destination, making the onward routes by rail or road that much shorter. Individual components are assembled at the factory and tested for perfect function. This high degree of factory-assembly reduces the installation time and prevents errors.
Comprehensive range
Five Vitobloc200 CHP units in position at the head office of the Deutschen Gesetzlichen Unfallversicherung (DGUV), St. Augustin
26/27
Efficient heat and power generation with combined heat and power units
With its combined heat and power units, Viessmann covers all requirements for environmentally responsible heating with natural gas, biogas and biomethane.
An advanced gas driven combined heat and power unit (CHP) generates both electricity and heat simultaneously. On the heating side, the CHP unit operates in parallel with a boiler. Both heat generators are connected to the heating system to generate heating water and DHW. The Vitobloc200 are designed as decentralised CHP units with a bias towards heating. These comparatively small units generate electricity for consumption on site. The heat that is generated by this process is used simultaneously, almost without losses, for heating. Any power not required is exported into the public grid. The Vitobloc200 output can reach 401kWel. Long maintenance intervals of up to 6000 hours further improve the economy. A heating system that generates power The compact Vitotwin350-F micro CHP unit is particularly suitable for modernising detached houses. It takes up little space, covers the heat demand of the building and, at the same time, generates power for consumption on site. This reduces annual electricity bills signicantly. The oorstanding enclosure houses the Stirling engine, a gas condensing boiler as peak load boiler and a 175l heating water buffer cylinder. Even with a small buffer volume, the modulating Stirling engine enables long runtimes.
Adding a DHW cylinder with at least 200l capacity makes the installation eligible for public subsidies (in Germany). Integral system separation makes deployment in an existing system possible without need for additional components (such as for water treatment, for example). Power demand at the press of a button A press of a button on the remote control is all that is needed to use home-generated power for appliances such as the washing machine, for example. If required, an individual program can be created with a time switch.
10-year guarantee
on all stainless steel heat exchangers for oil or gas condensing boilers up to 150kW
Comprehensive range
VITOTWIN 350-F
Compact micro CHP unit based on the Stirling engine Type C3HC Stirling engine: 1kWel, 3.6 to 5.3kW th Overall efficiency: 96% (Hs) [gross cv] / 107% (Hi) [net cv] Peak load boiler: 3.6 to 26kW Heating water buffer cylinder: 175l
Available in: DE AT, BE, CH, CZ, FR, GB, IT, LU, NL, SK, SL Available: 09/2013
VITOBLOC 200
Mainly available in: DE, BE, FR, GB, IT, PL, RUS Available: 04/2013
VITOBLOC 200
Module EM-50/81 Output: 50kWel, 81kW th Fuel: Natural gas 4-cylinder 4-stroke gas engine Efficiency: 90.3% (Hi) [net cv]
Mainly available in: DE, BE, FR, GB, IT, PL, RUS
VITOBLOC 200
Module EM-70/115 Output: 70kWel, 115kW th Fuel: Natural gas 6-cylinder 4-stroke gas engine Efficiency: 90.7% (Hi) [net cv]
28/29
VITOBLOC 200
Module EM-140/207 Output: 140kWel, 207kW th Fuel: Natural gas 6-cylinder 4-stroke gas engine Efficiency: 90.4% (Hi) [net cv] Module EM-199/263 Output: 199kWel, 263kW th Fuel: Natural gas 6-cylinder turbo-charged 4-stroke gas engine Efficiency: 89.6% (Hi) [net cv] High efficiency through external mixture cooling Module EM-199/293 Output: 199kWel, 293kW th Fuel: Natural gas 6-cylinder turbo-charged 4-stroke gas engine Efficiency: 89% (Hi) [net cv]
Mainly available in: DE, BE, FR, GB, IT, PL, RUS
VITOBLOC 200
VITOBLOC 200
Mainly available in: DE, BE, FR, GB, IT, PL, RUS
VITOBLOC 200
Module EM-238/363 Output: 238kWel, 363kW th Fuel: Natural gas 12-cylinder 4-stroke gas engine Efficiency: 90.1% (Hi) [net cv]
Mainly available in: DE, BE, FR, GB, IT, PL, RUS
VITOBLOC 200
Module EM-363/498 Output: 363kWel, 498kW th Fuel: Natural gas 12-cylinder turbo-charged 4-stroke gas engine Efficiency: 89.7% (Hi) [net cv] Module EM-401/549 Output: 401kWel, 549kW th Fuel: Natural gas 12-cylinder turbo-charged 4-stroke gas engine Efficiency: 92.7% (Hi) [net cv] High efficiency through external mixture cooling
VITOBLOC 200
System technology
VITOTRANS 200 AC Flue gas/water heat exchangers Utilising the condensing effect with exhaust gases from Vitobloc CHP units 50 to 401kWel Mainly available in: DE, BE, FR, GB, IT, PL, RUS
Comprehensive range
Biomass 4 to 13,000kW
30/31
Heating with biomass powerful systems for private and commercial applications
Boilers for any kind of wood are just part of the extensive biomass competence Viessmann has to offer.
Viessmann offers comprehensive solutions from pellet boilers for providing heat in detached houses, to complex plants for the generation of heat and power from biomass for residential complexes, commercial operations and supply utilities. Wood boiler up to 80kW The Vitoligno series of wood boilers are CO2 neutral heating systems for detached and two-family houses. Log burning, wood gasication and pellet boilers are characterised by high efficiency, reliability and easy operation. In the top model, the Vitoligno300-P, practically everything has been automated from fuel charging to cleaning the heating surfaces. Wood heating systems up to 1250kW Rotation combustion is one of the most advanced combustion systems in the medium output range for conditioned wood fuels, such as logs, pellets, woodchips and shavings.
Wood combustion systems up to 13,000kW Our product range includes all system components, from boilers and fuel treatment to ue gas scrubbing. The burn-all technology also enables the combustion of residual and waste wood with a high moisture content. The Pyroex wood combustion system, with step grate combustion, is designed for continuous operation of more than 8000hours a year. This permits continuous use in biomass CHP stations for power generation. Industrial/commercial boiler with biomass combustion All industrial/commercial boilers offered by HKB are also available for solid fuel or biomass combustion.
Comprehensive range
VITOLIGNO 300-P Pellet boiler Type VL3B 412, 618, 824, 1132, 1340, 1648kW Efficiency: up to 95% Testsieger
GUT (2,1)
Holzpelletkessel VITOLIGNO 300-P Im Test: 10 Anlagen, 1 Testsieger test Spezial Energie 2009 test Spezial Energie 2012
Available in: DE, AT, BE, CH, DK, FR, GB, IT, NL, PL, SE
VITOLIGNO 200-S High performance wood gasication boiler For logs up to 50cm long 20, 30, 40, 50kW. Efficiency: up to 92%
Available in: DE, AT, BE, CH, DK, FR, IT, NL, RO, SI Available: 04/2013
VITOLIGNO 100-S
Log gasication boiler For logs up to 50cm long 20kW (Western Europe) Efficiency: up to 88% 25 to 80kW (Eastern Europe)
Available in: DE, AT, BE, CH, CZ, FR, HR, IT, LT, LV, NL, PL, RO, RS, RU, SK, SI, UA
PYROMAT ECO
Boiler for manual charging For charging logs, wood briquettes, residual wood with shavings and old logs Internal hopper width 550mm: 35, 45, 55, 65kW Internal hopper width 1080mm: 61, 81, 101, 151kW Boiler efficiency: up to 92%
Available in: DE, AT, BE, CH, CZ, DK, FR, GB, HU, IR, IT, LU, NL, PL, RO, SI
PYROMAT DYN
Boiler for manual and automatic charging For the following fuels: logs, wood briquettes, pellets with shavings, old logs, pellets and woodland chippings 3549, 5275, 70100kW Boiler efficiency: up to 92%
Available in: DE, AT, BE, CH, CZ, DK, FR, GB, HU, IR, IT, LU, NL, SI
32/33
PYROT
Wood boiler with rotation combustion For pellets, woodland chippings Water content: max. w35/G50 80100, 135150, 200220, 270300, 360400, 480540kW
Available in: DE, AT, BE, CA, CH, FR, HU, IR, IT, LU, NL, NO, SE, UK
PYROTEC
Boiler for automatic charging For pellets, woodland chippings, wood remnants Water content: max. w50/G50 390, 530, 720, 950, 1250kW
Available in: DE, AT, BE, CZ, FR, HU, IR, IT, LU, NL, NO, PL, SK, UK
PYROFLEX
Fully automatic wood boiler with at moving grate combustion Type FSB Universal use of different types of wood fuel between w6 and w55 180, 220, 280, 350, 440, 550, 700, 850, 1100, 1400, 1700kW
Available in: DE, AT, BE, CZ, FR, HU, IR, IT, LU, NL, NO, PL, SK, UK
PYROFLEX
Fully automatic wood boiler with at moving grate combustion Type FSR Fuel transport with screw conveyor(s), hydraulic feed system or chain conveyor 850, 1100, 1400, 1700, 2100, 2600, 3300, 4200, 5200, 6500, 8000, 10,000, 13,000kW
Available in: DE, AT, BE, CZ, FR, HU, IR, IT, LU, NL, NO, PL, SK, UK
PYROFLEX
Biomass boiler with step grate For the following fuels: woodland chippings cuttings, bark, poplar, root stock, wood from countryside management Type SRT 850, 1100, 1400, 1700, 2100, 2600, 3300, 4200, 5200, 6500, 8000kW
PYROVENT
Wood combustion systems with direct ring system Combustion of dry, dust-like fuels Type FR 850, 1100, 1400, 1700, 2100, 2600, 3300, 4200, 5200, 6500, 8000, 10,000, 13,000kW
Available in: DE, AT, BE, CZ, FR, HU, IR, IT, LU, NL, NO, PL, SK, UK
Comprehensive range
Biogas plants
11.4MWgas biogas plant in Aiterhofen/Lower Bavaria the generated energy covers the annual electricity demand of around 8850 and the heat demand of 2000 households.
34/35
Schmack is a member of the ViessmannGroup and is the specialist for biogas plants. In conjunction with the Viessmann brands BioFerm and Carbotech, the Group can cover the entire spectrum of this particular sector from plants for wet and dry fermentation right up to injecting bio natural gas into the gas grid. Everything from a single source Schmack's core business is the development and build of plants that produce and utilise biogas economically. The company is one of the leading German suppliers in this eld, and is one of the few suppliers in this industry that can offer a fully rounded range of products and services. Our plant construction services include the engineering and development of the plant, as well as technical and biological services, right through to operational management. Biogas systems will only operate efficiently and economically if their system technology and microbiology are perfectly matched to each other. As a result, Schmack can apply the claim "Everything from a single source". A competent team of specialists covering engineering, permits, process engineering, biology and system build, support customers in achieving a high degree of availability.
Biogas specialist for wet fermentation plants Schmack's main focus is on the construction of biogas plants according to the wet fermentation principle. These plants process solid and liquid manure, as well as grass silage, maize and sugar beet. In addition, organic residues, such as grass cuttings, food leftovers or by-products from food processing can be fermented. Biomass is degraded in digesters by means of special bacteria under the exclusion of oxygen. As part of this process, the bacteria produce roughly two thirds methane, as well as carbon dioxide, nitrogen and small amounts of other gases.
7 3
1 5 6 2
6 7
Supply system Pre-fermentation pit High performance digester Pit storage fermenter All-in-One module (CHP unit with plant controller and substrate distribution) Transformer sub-station Gastight fermentation residue store
Comprehensive range
Biogas plants
36/37
Economical use of biowaste through dry fermentation according to the BIOFerm system
BIOFerm is the dry fermentation plant specialist. This company makes a real contribution to CO2 neutral energy generation with its innovative technologies.
Primary energy from biowaste and cuttings is eco-friendly, renewable and CO2 neutral in its generation. Little is demanded of the source material. Foodstuffs and fodder are not used for producing biogas. Turning biomass into valuable energy The BIOFerm process is based on the dry fermentation principle employed to digest biomass. Any organic solids that can be tipped can be used, such as biowaste, cuttings and manure with up to 60percent dry matter. No sorting out of fouling matter nor pre-treatment of the biomass required. The innovative BIOFerm system enables biomass to be utilised with minimum effort and energy. The fermentation process inside the biogas plants is split over individual digesters, where the biomass is fermented (digested) under the exclusion of air. This process guarantees constantly high gas yields with a methane content that sometimes exceeds 60percent. The biogas produced can be ungraded to biomethane and injected into the gas grid or can be converted into heat and power in a CHP unit. The generated power can be exported into the grid and the thermal energy can, for example, be utilised in local heating networks. Source of income for waste/composting operations and the food processing industry Apart from energy yields, any fermentation residues can be used as fertiliser in agriculture or processed as high grade compost or soil. BIOFerm offers completely new opportunities for municipal operations, the food processing industry and landscape gardening, where large amounts of biowaste and cuttings are produced. Instead of paying for the expensive disposal of this waste, it can be turned into valuable energy, thereby generating a sustainable payback. An active contribution to protecting the environment can be made as a by-product of this process. With a BIOFerm biogas plant, composting operations and farmers can secure for themselves an additional source of income. BIOFerm plants are built by Schmack Biogas this enables the Group to offer every product and service connected with biogas plants.
Biomass Mixing bay Digester Gas cylinder Heating equipment Combined heat and power unit Cooling/heat utilisation Power export
5 8
6 3
2 7
Comprehensive range
38/39
At Viessmann, the specialist for gas upgrading and gas injection is called Carbotech
Before bio natural gas can be injected as methane into the gas grid, biogas needs to be upgraded. This creates greater independence from natural gas imports.
Supplies of fossil fuels such as coal, crude oil and natural gas are getting shorter all the time effects of this phenomenon are reected in ever increasing energy prices. Biogas plays an important role in the development of sustainable, renewable alternatives to fossil fuels. Biogas can be produced from sustainable raw material and organic waste locally, reliably, simply, efficiently and with environmental responsibility. The upgrading of biogas to natural gas quality is, from efficiency and economical aspects, a vital prerequisite for its optimum utilisation. Only cleaned and upgraded biogas can be utilised in the existing national gas mains network and in decentralised combined heat and power units (CHP). Pioneer in the industry Carbotech is a recognised pioneer in Europe when it comes to the upgrading of biogas and is one of the leading suppliers of complete biogas to grid injection systems. The company is a member of the Viessmann Group and has been actively engaged in the biogas industry for more than 30 years. Furthermore, Carbotech draws on extensive experience in gas purication and gas production processes, such as the production of nitrogen from ambient air and hydrogen scrubbing.
Carbotech biogas upgrading plants have been in operation for many years in numerous European countries. They upgrade biogas to biomethane with utmost reliability, highly efficiently and they protect natural resources, as well as the environment. The pressure swing adsorption process developed by Carbotech is simple and distinguished both by its low energy consumption and high level of efficiency. Little wonder then that most of the biomethane projects in Europe are equipped with the Carbotech system.
Comprehensive range
Vitocal242-S split air/water heat pump (left) with a Vitovent300-F mechanical ventilation system (right)
40/41
Efficient heating and cooling with natural heat from the air or ground for private and commercial applications
The wide range of heat pumps meets all structural and geological requirements and covers any heat demand.
Utilising heat from the air or ground already makes a signicant contribution to the world-wide reduction of CO2 emissions. Our extensive range of heat pumps covers everything from compact appliances for passive houses to cascade solutions with an output of several hundred kilowatts. Brine, water and air can serve as heat sources. Heat pump and gas condensing boiler in a single compact casing The new Vitocaldens222-F heating system is complete and particularly space efficient; the heat pump, the gas condensing boiler and a 130l DHW primary store are housed together in just one enclosure. This compact unit, offering a heating output of 9kW (heat pump module) and 19kW (gas condensing module) is perfect for modernisation projects. Whisper quiet heat pumps with high ow temperatures At only 42dB(A), Viessmann heat pumps are as quiet as a fridge. They guarantee a high COP of up to 4.9 and ow temperatures up to 70C. The innovative Refrigerant Cycle Diagnostic system ensures high efficiency at any given operating point all year round. The integral energy statement facility is sufficient evidence to qualify for the receipt of BAFA subsidies. Natural and active cooling Brine/water heat pumps can utilise the low temperatures under ground in summer for cooling (natural cooling), bypassing the compressor entirely. With the AC-Box, externally reversing the heat pump process even enables active cooling.
Commercial applications Vitocal heat pumps are standardised for commercial applications up to 300kW (as a cascade up to 1.2MW). The comprehensive product range also includes large, powerful heat pumps up to 2000kW. These are individually designed and built to suit specic applications. Efficient mechanical ventilation systems Together with a compact air source or ground source heat pump, the Vitovent300-F mechanical ventilation unit combines the benets of an integral appliance with the exibility of Viessmann heat pumps. The Vitovent300 mechanical ventilation system operates independently of a specic heating system. Both appliances extract up to 97percent of the latent heat from stale air, the energy from which is then used to heat the incoming fresh air. The Vitovent200-D has been designed for ventilating individual rooms. However, when utilising several units, complete ventilation concepts can also be achieved.
This KWT heat pump uses waste heat to cool the data processing centre and appliance test beds at Viessmanns head office in Allendorf.
Comprehensive range
VITOCAL 350-G
Two-stage heat pump (master/slave) Brine/water heat pump: 37.4kW Water/water heat pump: 51.4kW
Available in: DE, AT, BE, CH, CZ, DK, FI, FR, IT, LU, NL, PL, RO, SE, SK, UK
VITOCAL 343-G
Compact heat pump (brine/water) Type BWT 341.A 5.9, 7.9, 10.3kW Cylinder capacity: 220l, with solar function
Available in: DE, AT, BE, CH, CZ, DK, EE, FI, IT, LT, LU, LV, NL, PL, SE, SK, UK
VITOCAL 333-G
Compact heat pump (brine/water) Type BWT 331.A 5.9, 7.9, 10.3kW Cylinder capacity: 170l
Available in: DE, AT, BE, CH, CZ, DK, EE, FI, IT, LT, LU, LV, NL, PL, SE, SK
VITOCAL 300-G
Single stage brine/water heat pump Type BW/BWC/BWS 301.A: 5.9, 7.8, 10, 12.9, 17kW Type BW/BWS 301.A: 21.2, 28.8, 42.8kW Single stage water/water heat pump 7.9, 10.4, 13.4, 17.1, 23kW 28.1, 37.1, 58.9kW
Available in: DE, AT, BE, BG, CH, CZ, DK, FI, FR, GB, HR, HU, IT, LT, LU, LV, NL, PL, RO, RS, RU, SI, SE, SK, UA
VITOCAL 300-G
Two-stage heat pump (master/slave) Brine/water heat pump: 11.8, 14.6, 16.6, 20, 25.8, 34kW 42.4, 57.6, 85.6kW Water/water heat pump: 15.8, 20.6, 20.8, 26.8, 34.2, 46kW 56.2, 74.2, 117.8kW
Available in: DE, AT, BE, BG, CH, CZ, DK, FI, FR, HR, HU, IT, LT, LU, LV, NL, PL, RO, RS, RU, SE, SK, UA, UK
42/43
VITOCAL 242-G
Compact heat pump (brine/water) Type BWT 241.A 5.9, 7.7, 10kW Cylinder capacity: 220l, with solar function
Available in: DE, AT, BE, CH, CZ, DK, EE, FI, FR, GB, HR, IT, LT, LU, LV, NL, PL, RO, SI, SK
VITOCAL 222-G
Compact heat pump (brine/water) Type BWT 221.A 5.9, 7.7, 10kW Cylinder capacity: 170l
Available in: DE, AT, BE, CH, CZ, DK, EE, FI, FR, HR, IT, LT, LU, LV, NL, PL, RO, RU, SI, SK
VITOCAL 200-G
Brine/water heat pump Type BWC 201.A 5.8, 7.7, 9.7, 13, 17.2kW
Available in: DE, AT, BE, BG, CH, CZ, EE, FR, GB, HR, IT, LT, LU, LV, NL, PL, SE, SI, SK, UA
Comprehensive range
Brine/water heat pump Type BW 302.A150 93 to 240kW, up to 1200kW (as a cascade) Water/water heat pump 122 to 290kW, up to 1450kW (as a cascade)
Available in: DE, AT, BG, CH, CZ, FI, GB, HU, IT, LT, NL, PL, RO, SE, SK, SL
VITOCAL 350-HT
44/45
VITOCAL 300-A
Air/water heat pump External/internal installation Type AWCI/AWO-AC 301.A 3 to 9kW, modulating
Available in: DE, AT, BE, CH, CZ, DK, FR, GB, HR, LU, NL, PL, RO, SE, SI, SK
VITOCAL 200-A
Comprehensive range
VITOCAL 242-S
Compact split heat pump (air/water) Inverter technology Type AWT-AC 241.B 7.5 and 9kW Type AWT-AC-M 241.A 3, 5.6, 7.7, 10.6kW Cylinder capacity: 220l, with solar function
Available in: DE, AT, BE, BG, CH, CZ, DK, EE, FI, FR, GB, HR, HU, IT, LT, LU, LV, NL, PL, RO, SE, SI, SK, TR Available: 04/2013
VITOCAL 222-S
Compact split heat pump (air/water) Inverter technology Type AWT-AC 221.B 7.5 and 9kW Type AWT-AC-M 221.A 3, 5.6, 7.7, 10.6kW Cylinder capacity: 170l
Available in: DE, AT, BE, BG, CH, CZ, DK, EE, ES, FI, FR, GB, HR, HU, IT, LT, LU, LV, NL, PL, RO, RU, SE, SI, SK, TR Available: 04/2013
VITOCAL 200-S
Split air/water heat pump Inverter technology Type AWB/AWB-AC 201.C 7.5 and 9kW Type AWB/AWB-AC 201.B 3, 5.6, 7.7, 10.6kW
Available in: DE, AT, BE, BG, CH, CZ, DK, EE, ES, FI, FR, GB, HR, HU, IT, LT, LU, LV, NL, PL, RO, RS, SE, SI, SK, TR, UA Available: 04/2013
46/47
VITOVENT 300-W
Mechanical ventilation system with heat recovery for demand-dependent ventilation with puried and heated outdoor air Operation via remote control 300 and 400m3 /h With integral bypass circuit and electric preheater coil
Available in: DE, AT, BE, BG, CH, CZ, DK, HU, IT, LU, PL, RO, RU, SE, SK, SL, UA Available: 04/2013
VITOVENT 300
Mechanical ventilation system with heat recovery for demand-dependent ventilation with puried and heated outdoor air Operation via remote control 180m3 /h
Available in: DE, AT, BE, BG, CH, CZ, DK, HU, IT, LU, PL, RO, RU, SE, SK, SL, UA
VITOVENT 200-D
Regulated mechanical ventilation with heat recovery for individual rooms Up to 55m3 /h Heat recovery level up to 90%
Comprehensive range
48/49
The sun supplies free energy for generating hot water and power
Solar collectors are the perfect complement for heating DHW and heating water. Photovoltaic modules generate power for own consumption.
Solar energy ranks among the most environmentally responsible energy sources imaginable. In conjunction with other heating systems, they save energy costs and make an active contribution to protecting the environment. After all, solar energy is free, reduces reliance on other fuels and protects against climate change. Solar collector systems that provide DHW as well as central heating backup are enjoying increasing popularity. Combined with an advanced condensing boiler, these systems ensure efficient and futureproof heat provision for any building savings of up to 35percent of the total heating costs are possible. So those wishing to modernise an existing heating system or build a new one can no longer afford to ignore a solar thermal system. Viessmann is a leading European manufacturer of solar thermal systems and can draw on more than 30 years of experience in this sector. High grade, powerful collectors Solar collectors are the ideal complement to any heating system. Flat-plate collectors can be used economically and efficiently anywhere. They are used predominantly to heat domestic hot water. Stable frames, puncture-proof back panels and permanently sealed edges ensure reliability and high yields over many years. The at-plate collectors are available in all RAL colours, so they can be matched to the surrounding roof surface. Central heating backup with solar thermal systems Vacuum tube collectors are not only designed for DHW heating, but are frequently used for central heating backup or solar air conditioning. They achieve high yields, even with low levels of insolation. The individual tubes can be rotated around their axes for optimum alignment with the sun.
Simple installation by design All at-plate and vacuum tube collectors are equipped with a simple standard installation system made from high grade corrugated stainless steel pipe plug-in connectors. Different installation options enable the collectors to be integrated into the respective building architecture. Perfectly matching system components, from the solar collector via the DHW cylinder to the heat source, guarantee high operational reliability and efficiency. Power generation with photovoltaics High yields from solar power generation are achieved when employing a capable system comprising high grade photovoltaic modules, a statically tested, stainless xing system and matching inverter. A module area of only 10m2 can generate an amount of power equivalent to the average annual consumption of one person. Independence from the power supply utility Viessmann storage battery systems retain the power generated by the PV system for own consumption, thereby creating greater independence from power supply utilities. They are particularly suitable for detached houses.
Photovoltaic system
Comprehensive range
Flat-plate collectors
VITOSOL 300-F Flat-plate collector With anti-reex coating Type SV3A/SH3A Type SV3B/SH3B Absorber area: 2.3m2 Available in: DE, AT, BE, CH, ES, FR, LU, PL
VITOSOL 200-F
Available in: DE, AE, AT, BE, BG, CH, CN, CZ, DK, EE, ES, FI, FR, GB, HR, HU, IT, LT, LU, LV, NL, PL, RO, RS, RU, SE, SI, SK, TR, UA
VITOSOL 200-F
Large area at-plate collector For roof integration Type 5DIA Absorber area: 4.8m2
VITOSOL 200-F
Flat-plate collector For solar thermal systems (DHW) Type SVK Absorber area: 2m2 (4m2 as a pack) Collectors specically for solar DHW heating.
Available in: DE, AE, AT, BE, BG, CZ, FR, HR, HU, IT, LT, PL, RO, RS, SI, SK, TR, UA Available: 04/2013
VITOSOL 200-F
Flat-plate collector Specically for large scale solar plants Type SVE Absorber area: 2.3m2
VITOSOL 100-F
Available in: AE, BE, BG, CA, CN, CZ, ES, FR, HR, HU, IT, PL, RO, RS, RU, SK, TR, US
50/51
VITOSOL 200-T
Vacuum tube collector Based on the heat pipe principle (at) Type SP2A Absorber area: 1.3, 1.5and3m2
Available in: DE, AT, BE, BG, CA, CH, CN, CZ, DK, EE, ES, FR, GB, HR, HU, IT, LT, LV, NL, PL, RO, RS, RU, SE, SI, SK, TR, UA, US Available: 04/2013
VITOSOL 200-T
Vacuum tube collector Based on the heat pipe principle (at) Type SPE Absorber area: 1.5and 3m2
Available in: DE, AE, AT, BE, BG, CA, CH, CZ, DK, EE, ES, FR, GB, HR, HU, IT, LT, LU, LV, NL, PL, RO, RS, RU, SE, SI, SK, TR, UA, US Available: 04/2013
Comprehensive range
Photovoltaic systems
Photovoltaic systems
VITOVOLT 200 Monocrystalline photovoltaic module Module output ratings: Up to 200Wp Module output ratings: Up to 270Wp Available in: DE, AT, BE, CH, CZ, ES, FR, GB, IT, NL, SK
VITOVOLT 200
Black monocrystalline photovoltaic module Type M260JA Module output ratings: Up to 260Wp
Available in: DE, AT, BE, CH, DK, ES, FR, GB, IT Available: 04/2013
VITOVOLT 200
Available in: DE, AT, BE, CH, CZ, ES, FR, GB, IT, NL, SK
52/53
Photovoltaic systems
Inverter
Inverter (grid export device) For the conversion of the DC power generated by the solar cells into AC power and export to the public power grid. Highest safety on account of the DC/AC safety equipment and IP65 rating Robust casing made from stainless steel and aluminium Intelligent cooling concepts for the highest efficiency Well segmented output categories for maximum exibility to match individual system requirements Available in: DE, AT, BE, CH, CZ, DK, ES, FR, GB, IT, NL, SK
Comprehensive range
DHW cylinders
The Vitocell range from Viessmann offers the right DHW cylinder for every demand, perfectly matched to your boiler or solar thermal system.
54/55
The proven way to heat domestic hot water is using a heat generator combined with a DHW cylinder. High draw-off rates, low standby losses and high efficiency levels result in convenience, economy and operational reliability. Meeting the customer's every demand With its wide range of DHW and buffer cylinders, Viessmann can meet every customer demand and aspiration for DHW heating and central heating backup. The range offers cylinders from 120 to 1000l capacity, for mono mode and dual mode system, for installation below or adjacent to the heat generator. DHW heating with a complete pack For efficient DHW heating in modernisation projects or in newly built detached houses, the pack comprising two Vitosol200-F (type SVK) at-plate solar collectors and the dual mode Vitocell100-B DHW cylinder with 250l capacity is the ideal choice. The solar pack is a perfect supplement when replacing older boilers or in new systems, where the utilisation of free solar energy is frequently a must. Hygienic DHW provision The Vitocell100, with its Ceraprotect enamel coating, offers secure and lasting protection against corrosion, and it is one of the topselling enamelled DHW cylinders. Vitocell 300 DHW cylinders made from corrosion-resistant stainless steel meet the most stringent hygiene standards.
Stainless steel is used for good reason in kitchens, laboratories, hospitals and the food processing industry. Its homogeneous stainless steel surface remains perfectly hygienic, even after many years in use. The internal indirect coils of Vitocell DHW cylinders are generously sized and run right down to the cylinder oor. This ensures that the entire content is heated evenly. The coils are arranged for easy commissioning and fault-free operation since they can be vented upwards and fully drained through the bottom. Perfect unit Using matching system connections, the heat source and DHW cylinder form an optimal unit that is quick and easy to install.
Comprehensive range
DHW cylinders
VITOCELL 100-W
DHW cylinder Made from steel with Ceraprotect enamel coating Type CUG Cylinder capacity: 100*, 120, 150l
Available in: DE, AT, BE, CH, CN, CZ, DK, ES, FR, HR, HU, IT, LT, NL, PL, RO, RS, RU, SE, SI, SK, UA * BG, CZ, HR, HU, LT, LV, PL, RO, RS, RU, SK, SI, UA, TR Available in: DE, AT, BE, CH, CZ, DK, ES, FR, GB, HR, HU, IT, LT, NL, PL, RO, RU, SE, SI, SK, UA
VITOCELL 300-W
DHW cylinder Made from stainless steel Type EVA Cylinder capacity: 160, 200l
VITOCELL 100-W
DHW cylinder for solar thermal systems Made from steel with Ceraprotect enamel coating Type CVB Cylinder capacity: 300, 400, 500l
Available in: DE, AT, BE, CH, CZ, DK, ES, FR, GB, HR, HU, IT, LT, NL, PL, RO, RU, SE, SI, SK, UA
VITOCELL 100-V
Electric solar cylinder with solar connection set Made from steel with Ceraprotect enamel coating Type CVS Cylinder capacity: 200 and 300l, 390l (without connection set)
Available in: FR
VITOCELL 100-W
Electric solar cylinder Factory-tted Steatit immersion heater, solar circuit pump, control unit and ttings Made from steel with Ceraprotect enamel coating Type CVSA Cylinder capacity: 200, 250, 300l
56/57
VITOCELL 300-V
DHW cylinder Made from stainless steel Type EVI Heated by an internal indirect coil, with anged aperture Cylinder capacity: 200, 300, 500l
Available in: DE, AE, AT, BE, CA, CH, DK, ES, FR, GB, HR, HU, IT, NL, PL, RO, RS, RU, SE, SI, TR
VITOCELL 100-V
DHW cylinder Made from steel with Ceraprotect enamel coating Type CVA Cylinder capacity: 160, 200, 300, 500, 750, 1000l Heat pump cylinder (type CVW): 390l
Available in: DE, AE, AT, BE, BG, CA, CH, CZ, DK, ES, FR, HR, HU, IT, LT, NL, PL, RO, RS, RU, SE, SI, SK, TR
VITOCELL 300-H
DHW cylinder Made from stainless steel Type EHA Cylinder capacity: 160, 200, 350 and 500l
Available in: DE, AE, AT, BE, CZ, ES, FR, GB, HR, HU, IT, NL, PL, RS, RU, SI, SK
VITOCELL 100-H
DHW cylinder Made from steel with Ceraprotect enamel coating Type CHA Cylinder capacity: 130, 160, 200l
Available in: DE, AE, AT, BE, CH, CZ, ES, FR, HR, HU, IT, LT, NL, PL, RO, RS, RU, SI, SK
VITOCELL 100-L
Cylinder for DHW heating systems With primary store system Made from steel with Ceraprotect enamel coating Type CVL Cylinder capacity: 500, 750, 1000l
Available in: DE, AE, AT, BE, CH, CZ, DK, ES, FR, HR, HU, IT, LT, NL, PL, RO, RU, SE, SI, SK, TR
Comprehensive range
DHW cylinders
VITOCELL 100-B
Available in: DE, AT, AE, BE, BG, CN, CZ, FR, GB, HR, HU, IT, LT, PL, RO, RS, SI, SK, TR, UA Available: 04/2013
VITOCELL 100-B
Dual mode DHW cylinder Made from steel with Ceraprotect enamel coating Type CVB Cylinder capacity: 300, 400, 500l
Available in: DE, AE, AT, BE, BG, CH, CZ, DK, ES, FR, HR, HU, IT, NL, PL, RO, RS, RU, SE, SI, SK, TR
VITOCELL 300-B
Dual mode stainless steel DHW cylinder Type EVB Cylinder capacity: 300 and 500l
Available in: DE, AE, AT, BE, DK, FR, GB, HR, IT, NL, PL, RS, RU, SE, SI, SK, UA
58/59
Heating water buffer cylinder With and without stratication system Cylinder capacity: 750 and 950l Solar-Divicon (type PS10) and connection set for immediate mounting on the heating water buffer cylinder
Available in: DE, AE, AT, BE, BG, CH, CZ, DK, EE, ES, FI, FR, HR, HU, IT, LT, LU, NL, PL, RO, RS, RU, SE, SI, SK, TR Available: 04/2013
VITOCELL 100-E
Heating water buffer cylinder Cylinder capacity: 200l (type SVW)* 400l (type SVP) 750 and 950l (type SVPA) * also available as Vitocell100-W
Available in: DE, AE, AT, BE, BG, CH, CZ, DK, EE, ES, FR, GB, HR, HU, IT, LT, LV, NL, PL, RO, RS, RU, SE, SI, SK, TR
Comprehensive range
Vitotronic control units for all small and medium-sized boilers, wall mounted boilers and heat pumps
Standard control unit up to 2000kW With increasing demands for efficient, multi mode and user-friendly heating systems, the control unit gains ever more importance. As a response to this demand, Viessmann now offers a standard range of control units in the shape of the Vitotronic200/300 that is suitable for all small boilers, wall mounted boilers, medium-sized boilers and heat pumps. Direct access: operating program and set room temperature The easy-to-understand Vitotronic puts the most important controls, such as the operating parameters and set room temperature, right at your ngertips. The graphic display of the current state of the heating system is equally convenient. The second control level offers a clear menu structure for further settings.
60/61
Oil/gas boilers
Vitotronic200 Type HO1C with Vitodens300-W Vitodens333-F/ 343-F Vitosolar300-F Type HO1B with Vitodens200-W/222-W Vitodens222-F Vitoladens300-W/333-F Vitosolar300-F Vitopend200-W Vitotronic200 Type WO1C with Vitocal200-A Vitocal200-S Vitocal222-S/242-S Vitocal222-G/242-G Vitocal333-G/343-G
Vitotronic200 Type K01B with Vitola200 Vitoladens300-T Vitotronic200 Type K02B with Vitogas200-F Vitorondens200/222-T Vitorondens222-F
Vitotronic200 Type GW1B with Vitocrossal200/300 Vitoplex100/200 Vitotronic300 Type GW2B/GW4B with Vitocrossal200/300 Vitoplex100/200
Heat pumps
Operation with user prompts Operation with user prompts is easy and intuitive. This is supported by standard controls, a large backlit graphic display with several plain text lines, a high contrast monochrome depiction and a contextsensitive help function accessible via the "?" key. Special functions, such as heating curve, solar yield in connection with the SM1 solar controller and switching times are depicted graphically. With integral solar control function The Vitotronic200 controls applications with solar central heating backup, two heating circuits with mixer and one directly connected heating circuit. The SM1 solar control module can be used with all oorstanding oil and gas boilers, as well as all wall mounted boilers for solar DHW heating and central heating backup; it can also be used in connection with the Vitotronic300-K cascade control unit. Reheating suppression raises the efficiency In heating systems with solar DHW and central heating the reheating suppression of the Vitotronic control unit contributes to higher efficiency. For this, the control unit
takes the amount of DHW heated by the solar thermal system during the last 24 hours into account and suppresses unnecessary reheating by the heat generator if similar conditions can be expected. The boiler only starts if the water inside the DHW cylinder falls below a certain minimum temperature. Vitotronic300-K cascade control The Vitotronic300-K type MW2B control unit is designed for multi boiler systems and cascades of wall mounted gas boilers. Depending on application, the control unit can also be supplied for installation in a control panel. The current status of up to eight Vitodens 200-W is clearly shown on the default screen in graphic form. As an option, up to two mixer controllers can be retrotted. The hardwired Vitotrol200 and Vitotrol300 remote control units, as well as the wireless versions Vitotrol200 RF and 300RF, offer a convenient means of operating the Vitotronic from anywhere in the building. Not only is the hardwired outside temperature sensor available, but also a light-activated wireless outside temperature sensor, depending on the installed control unit version.
Comprehensive range
VITOTRONIC 300-K System control unit for dual mode, multi mode and heat demand-dependent systems with up to eight heat generators
Vitotronic300-K system control As a supplement to the existing cascade control program, the Vitotronic300-K (type MW3B) has been designed for dual mode and multi mode systems with up to eight heat generators in the output range from 100kW to 1MW. As an option, the new control unit offers the integration of CHP units and solid fuel boilers when combined with heating water buffer cylinders. Integral buffer management, with up to ve temperature sensors, provides the best possible buffer charging. This range is rounded off by extending the existing Vitotronic100 boiler control unit. With the integral system ow temperature control, it enables the switching in series of appliances in conjunction with CHP units or solid fuel boilers. The variable speed control of HE pumps facilitates the accurate control of the target temperature for buffer charging. Compatible with existing accessories Operating this control unit is as easy as it is for all Viessmann heat generators equipped with a Vitotronic. Accessories from our existing product range can continue to be used. Remote control, monitoring and optimisation of all system functions with Vitocom/Vitodata continues to be possible.
Professional monitoring for heat supply utilities, contractors and municipal services
1
5
LON
2
010 V
3 4
KM-BUS
System components 1 Vitotronic300-K, type MW3B 2 EA2 extension 3 EA1 extension 4 Variable speed HE pump from 0 to 10V 5 Existing boiler 6 Vitocrossal200 with Vitotronic100, type GC1C or GC4C 7 Vitobloc200 8 Heating water buffer cylinder with five sensors
TeleControl Data links from heating systems to communication systems hardwired or wireless
62/63
Mobile operation from anywhere at any time Advanced means of communication make information exchange easier, between man and machine too. For Viessmann heating systems, these means are the TeleControl systems Vitodata and Vitocom. These enable oil and gas boilers, pellet boilers and heat pumps from Viessmann to be easily monitored and controlled from practically anywhere using the internet. This exible and mobile control saves time and unnecessary journeys. Integrating Vitobloc CHP units The Vitodata300 facilitates the remote monitoring of heat generators utilising Vitotronic control units as well as the integration of Vitobloc CHP units. This offers a uniform and common visualisation of the heat and power generators. Network integration via DSL router Data transfer via ADSL is increasing its relevance for TeleControl. ADSL connections are generally offered on a at rate basis. Consequently, this medium represents a costeffective option for data transfer. No manual conguration is required to build the communication with the Vitodata server using the Vitocom100 LAN1. The rapid data transfer and extremely low running costs open up new and efficient opportunities for remote control of heating systems by this route. The benets of Vitocom100, LAN1 at a glance:
ET
Professional monitoring for heat supply utilities, contractors and municipal services
TeleControl
VITODATA 100, VITOTROL VITODATA 300
Service Control
VITOSOFT 300
INTERNET
INTERNET
INTERNET