Professional Documents
Culture Documents
Date: Description: 23/02/2012 09:24:18 a.m. Automatically recorded Snapshot from Commissioning Wizard.
Fieldbus Type: Segment Tag: Measurement Equipment Type: Serial Number: Software Revision: DTM Revision:
Result:
Legend Excellent Good Out of Specification
Limits used for this classification are listed on the last page of this report
Diagnostic Messages
All values are within the specification limit with an adequate safety margin The value is within the specification limits but the safety margin is reduced The value exceeds the allowed range
Date:
Page: 1
Board and Power Supply Module Configuration: Power Supply Module Status: Min Addr 35 35 35
Pri. Pwr Voltage: Sec. Pwr Voltage: Segment Voltage: Current: Unbalance: Noise: Jitter: Signal Level:
Value
Value
Board and Power Supply Module Details Board Type: Board Redundancy: Module A/B Mismatch: Module A: Module B: Field Device Details Address: Tag: Polarity: 35 Standard Value
OK OK
Failure -
Min
Value
Max
Standard Value
Min
Value
Max
Date:
Page: 2
Min
Value
Max
Date:
Page: 3
Defined limit values Pri. Pwr Voltage: Sec. Pwr Voltage: Voltage: Current: Unbalance: Noise: Jitter: Signal Level:
Topology Settings
Low Out of Spec. < 19.2V < 19.2V < 9.0V < -84% < 200mV
Low Good 9.0 ... < 24.5V -84 ... < -60% 200 ... < 685mV
Excellent 19.2 ... 35.0V 19.2 ... 35.0V 24.5 ... 28.5V 0 ... 360mA -60 ... 60% <= 50mV <= 2.4s 685 ... 1200mV
High Good > 28.5 ... 32.0V > 60 ... 84% > 50 ... 100mV > 2.4 ... 3.2s -
High Out of Spec. > 35.0V > 35.0V > 32.0V > 6500mA > 84% > 100mV > 3.2s > 1200mV
Measure Position: Power Supply: Fieldbus Coupler Type: Trunk Cable Type: Trunk Length [m]:
Date:
Page: 4