You are on page 1of 2

Procedure to configure Android for BU-Standard Wi-Fi Services

A. Pre-requisite B. Installation and Connection Procedure C. Security Note

A. Pre-requisite
To access BU-Standard, the Android version must be v2.2 or above.

B. Configuration Procedure (to be done once only)


1. Go to the main menu. 2. Choose Settings. 3. Choose Wireless & Networks. 4. Choose Wi-Fi settings.

5. Tap BU-Standard. 6. Set EAP Type to PEAP. 7. Set Phase 2 Authentication to MSCHAPV2.

faq-wifi-bu-android-setup.doc

8. Set Identity to your HKBU SSOid.


SSOid (Single-Sign-On Identity) For student: his/her student number, e.g. 12000000 For Staff: his/her email-name, e.g. chanman for chanman@hkbu.edu.hk

9. Set Wireless password to your unified-password.

*** No need for CA or Client certificate.

10. Click Save. 11. Android should now connect to BU-Standard automatically.

C. Security Note
Since HKBU SSOid and unified-password are employed to login at BU-Standard Wi-Fi, as a better password security measure, you should change your unified-password periodically.

For any enquiry, contact IT Office Hotline at 34117899, or email hotline@hkbu.edu.hk.

USS/ITO 2012/10

faq-wifi-bu-android-setup.doc

You might also like