Professional Documents
Culture Documents
MODULE 16 PMR Scale Drawing Solid Geometry
MODULE 16 PMR Scale Drawing Solid Geometry
10 m Diagram shows a trapezium. On the grid in the answer space,draw the diagram using scale of 1 : 200.The grid has equal squares of 1 cm each. [3 marks]
2.
1 2
Page 1
MODULE 16 PMR
3. The figure shows a hexagon. Redraw the hexagon according to a scale of 1: 1 3
4.
Diagram shows an irregular pentagon. On the grid in the answer space, draw Diagram using the scale 1 : 300. The grid has equal squares with side of 1 cm.
16 m 24 m 16 m
24 m
Page 2
MODULE 16 PMR
5. Diagram shows a right pyramid with a rectangular base. Draw a full scale net of the pyramid on the grid in the answer space. The grid has equals squares with sides of 1 unit. 5 units 6 units 8 units
6.
Diagram shows a cuboid. One of the surfaces of the net is drawn on a square grid with sides of 1 unit in the answer space. Complete the net of the cuboid.
5 units
3 units 4 units
Page 3
MODULE 16 PMR
7.
On the grid in the answer space, redraw polygon S using the scale 1 : equal squares with sides of 1 unit.
8.
Diagram shows a prism. One of the surfaces of the net is drawn on a square grid with
Page 4
MODULE 16 PMR
sides of 1 unit in the answer space. Complete the net of the prism. 3 unit
3 unit 7 unit
10 unit
9.
Starting from the line PQ, draw polygon PQRST which is congruent to polygon ABCDE
Page 5
MODULE 16 PMR
D C Q
B P
10.
Starting from the line PQ, draw polygon PQRSTU which is congruent to polygon ABCDEF.
E D C
END OF MODULE
Page 6