Always use the correct size drill and maintain the cutting speed within the permissible range. Ensure the drill, drift, and workpiece are burr-free and the workpiece is properly supported. Select the proper tool material for the work material hardness and stop the machine before engaging the power feed to safely perform drilling operations.
Always use the correct size drill and maintain the cutting speed within the permissible range. Ensure the drill, drift, and workpiece are burr-free and the workpiece is properly supported. Select the proper tool material for the work material hardness and stop the machine before engaging the power feed to safely perform drilling operations.
Always use the correct size drill and maintain the cutting speed within the permissible range. Ensure the drill, drift, and workpiece are burr-free and the workpiece is properly supported. Select the proper tool material for the work material hardness and stop the machine before engaging the power feed to safely perform drilling operations.
2. Always maintain the cutting speed within the permissible range. 3. Ensure that the drill shank and tang carry no burrs. 4. Also ensure that the edges of drill drift are free of burrs. 5. Select the proper tool material-high carbon steel, high speed steel, carbide that will suit the hardness of the work material. 6. Ensure that the work-piece is properly supported before starting the operation. 7. Always stop the drill machine before engaging the power feed on a gear head machine. 8. Ensure that the chips continue to flow out of the drilled hole in order to avoid drill clogging, excess heat generation and possible breakage of drill. 9. Take special care in regarding a drill to ensure that prescribed drill geometry is correctly stored.