Tutorial M-01: Performing the history matching in MBAL for a gas reservoir
Objectives: Familiarize the user with MBAL and practice the procedure to perform a history matching of a gas reservoir material balance model. Reservoir data PVT Parameters Value Units Specific gas gravity 0.85 Separator pressure 990 Psig CGR (Condensate to gas ratio) 2 Stb/MMscf Oil density 42 API Water salinity 10000 Ppm H2S % 0 % CO2 % 0 % N2 % 0 %
The reservoir is at a depth of 9700 feet, the initial reservoir pressure is 4365 psig. The average reservoir thickness estimated with logs is 28 feet with an average porosity of 19%. The connate water saturation is estimated in 20%. The reservoir temperature is 200 F. The average reservoir permeability estimated with pressure transient analysis is 20 md. The equivalent reservoir radius is estimated in 30000 feet.
Pseudo relative permeability curves data
Phase Residual Saturation End Point Corey Exponent Water 0.20 0.6 1 Gas 0.02 0.9 1
The field is producing since 1991 and the production history is attached in the Excel file called M-01.xls.
Questions Perform the history matching to calibrate the model and obtain:
Variables Value Units Gas initial in place Bscf Determine the presence of an aquifer yes/no Actual recovery factor %