1- Multimeters 2- Function Generator 3- Oscilloscope
Resistance measurement, Diode Testing and continuity testing. Turn on the device. Turn on the device. AC, DC voltage. Set wave Shape (sinewave, triangular, square). Build a Circuit. Current Measurement (Multimeter, Clamp). Set frequency. Connect Probes to view required waveforms. Measurement of capacitance. Set Amplitude. Adjust setting to view waves properly. Set Duty cycle. Adjust Datum to center of screen. Connect Probes to circuit. Write down current volt/div, time/div Change volt/div, current/div as required. Using Oscilloscope to view following measurements (RMS, Peak-to peak, frequency, Duty Cycle). Using a flash memory save a screenshot of the display. View ripples on screen