You are on page 1of 1

GOVERNMENT OF ANDHRA PRADESH

A B S T R A C T
R&B Common SSR for all Engineering Departments Fixation of Cement and Steel Rates
for the month of February, 2013 (3
rd
month of 3
rd
quarter) Orders Issued.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TRANSPORT, ROADS AND BUILDINGS (Roads-I) DEPARTMENT

G.O.Rt.No. 245 Dated: 27.02.2013.
Read the following:

1. G.O.Ms.No. 94, T.R & B, (R.I) Dept., Dated: 16.04.2008.
2. From ENC(I.W) I&CAD Lr. No. ENC/IW/P&M/ EE.III/ DEE10/ 5
AE/13305/12, Vol.-17 Dated: 12. 02.2013.
***
O R D E R :

The Engineer-in-Chief (IW) I&CAD, in his letter 2
nd
read above, has informed that in
terms of orders issued in G.O.1
st
read above the Sub-Committee of Engineers, met on
08.02.2013 has finalized the rates of Cement & Steel for the month of February, 2013, (3
rd

month of 3
rd
quarter) and requested to approve the same.

2. Government, after careful examination of the matter hereby approves the rates of
cement & steel, for the month of February, 2013 (3
rd
month of 3
rd
quarter), as detailed
below:-

Sl.
No.
Material Rates fixed for February, 2013 (Rate for 1 MT.)
CEMENT
1. a) Ordinary Portland Cement
(43/53 grade)
Rs.4,500/- (Rupees Four Thousand five hundred
Only)
b) Portland Pozzolana Cement Rs.4,400/- (Rupees Four Thousand and Four Hundred
only)
c) Portland Slag Cement Rs.4,800/- (Rupees Four Thousand and eight Hundred
only)
STEEL
2. 6 mm M.S.Rods Rs.43,000/- (Rupees Forty Three Thousand only)
3. M.S.Flats Rs.42,500/- (Rupees Forty Two Thousand five hundred
only)
4. Mild steel, structural steel, i.e
Angles channels & I-sections
Rs.44,500/- (Rupees Forty Four Thousand Five Hundred
only)
5 TMT /HYSD bars
a. Fe-415 Rs.45,000/- (Rupees Forty five Thousand only)
b. Fe-500 Rs.46,000/- (Rupees Forty SixThousand only)
6. M.S.Plates Rs.42,500/- (Rupees Forty two Thousand five
hundred only)
7. HSCR Steel bars
Fe-500 Rs.48,500/- (Rupees Forty eight Thousand five
hundred only)
8. P.C.drawn wire/H.T. Wire
3 mm
Rs.59,500/- (Rupees Fifty Nine Thousand and five
hundred only)
9. P.C.drawn steel wire/HT wire
4 mm
Rs.58,500/- (Rupees Fifty Eight Thousand and Five
Hundred only)
10. H.R.Sheet in coils 1.6 mm Rs.48,000/- (Forty eight Thousand only)
11. H.R.Sheet in coils 2.0 mm Rs.47,000/- (Rupees Forty seven Thousand only)
12. 5.5/6.0 mm M.S wire rod coil Rs.45,000/- (Rupees Forty Five Thousand only)
13. Foundry Grade Pig Iron (2.00 to
2.24) (Excluding Taxes)
Rs.29,750/- (Rupees Twenty Nine Thousand Seven
Hundred and fifty only)

3. All the Heads of Departments/Corporations, Universities, Agencies dealing with PWD
works shall take action accordingly.

4. This order issues with the concurrence of Fin. Dept. vide their, U.O.No. 4630/194/
Expr.PW-II/2013, Dated: 25.02.2013.

(BY ORDER AND IN THE NAME OF THE GOVERNOR OF ANDHRA PRADESH)
S.P.SINGH
PRINCIPAL SECRETARY TO GOVERNMENT
To:
The Engineer-in-Chief (IW), I & CAD Dept. (P&M Cell), Hyderabad.
The Engineer-in-Chief (R&B), Admn. & NH, Hyderabad.
The Director of Works Accounts, A.P., Hyderabad.

//FORWARDED BY ORDER//
SECTION OFFICER

You might also like