This component consists of three relays with electrical connections in the form of 4 mm sockets that can be mounted in a frame or on a profile plate. Each relay contains a coil, armature, return spring, and contact assembly. When power is applied to the coil, a magnetic field is created that pulls the armature and actuates the contact assembly to open or close electrical circuits. When power is removed, the spring returns the components to their original position. The status of the relays is indicated by LEDs and the four changeover contacts can be used as normally open, normally closed, or changing contacts.
This component consists of three relays with electrical connections in the form of 4 mm sockets that can be mounted in a frame or on a profile plate. Each relay contains a coil, armature, return spring, and contact assembly. When power is applied to the coil, a magnetic field is created that pulls the armature and actuates the contact assembly to open or close electrical circuits. When power is removed, the spring returns the components to their original position. The status of the relays is indicated by LEDs and the four changeover contacts can be used as normally open, normally closed, or changing contacts.
This component consists of three relays with electrical connections in the form of 4 mm sockets that can be mounted in a frame or on a profile plate. Each relay contains a coil, armature, return spring, and contact assembly. When power is applied to the coil, a magnetic field is created that pulls the armature and actuates the contact assembly to open or close electrical circuits. When power is removed, the spring returns the components to their original position. The status of the relays is indicated by LEDs and the four changeover contacts can be used as normally open, normally closed, or changing contacts.
This component consists of three relays with connections and
two bus-bars for the power supply. All electrical connections are in the form of 4 mm sockets. The unit can be mounted in a mounting frame or on the profile plate using four plug-in adap- ters. Function The relay consists of a coil with a core (1) and winding (3) with connection lugs (7), an armature (4), a return spring (2) and a contact assembly with four changeover contacts (5) and connec- tion lugs (6). When power is applied to the coil connections, cur- rent flows through the winding, creating a magnetic field. The armature is pulled onto the coil core and the contact assembly is actuated. Electrical circuits are opened or closed via this assem- bly. When the electrical current is removed, the magnetic field collapses and the armature and contact assembly are returned to their original position by a return spring. Note The switching status of the relays is indicated by LEDs, which are protected against incorrect polarity. The four changeover contacts of the contact assembly can be used as normally-open contacts (1), normally-closed contacts (2) or changeover contacts (3). K 3 4 5 6 7 1 2 A1 A2 14 24 34 44 11 21 31 41 12 22 32 42 12 14 22 24 32 34 42 1 2 3 A1 A2 A1 A2 11 21 31 41 11 21 31 41 44 Voltage 24 V DC Contact assembly 4 changeover contacts Contact rating Max. 5 A Contact interrupt rating Max. 90 W Pickup time 10 ms Drop-off time 8 ms Connections For 4 mm plugs Subject to change Technical data Relay, 3-off 011087 1/2 Festo Didactic S K K Y 1 2 2 = ffner = Schlieer S = START - Taster Example of application: Circuit diagram, electrical 1 2 S K 12 14 11 K Y A1 A2 2 +24V- 0V 13 14 = ffner = Schlieer S = START - Taster Normally closed contact Normally open contact S = Start push-button Example of application: Practical assembly, electrical K 12 11 14 K A1 A2 12 11 14 14 A1 A2 Wechsler als Schlieer angeschlossen Wechsler als ffner angeschlossen Changeover switch connected as n.c. contact Changeover switch connected as n.o. contact Normally-open contacts, normally-closed contacts: Allocation of contacts on relay plate Normally closed contact Normally open contact S = Start push-button 011087 Relay, 3-off 2/2 Festo Didactic