DOC. HM/LB/STD/001 EFF. DATE 01.01.08 Rev 00 PAGE 1 OF 1
DHARMENDRA MISHRA PREPARED BY
RAMAN RAMCHANDRAN APPROVED BY CONTROL STATUS
HERO MOTORS LIMITED, GHAZIABAD.
1. SCOPE This specification defines requirement to be fulfilled by the forging vendor for offering steel to be used for manufacturing blanks for Hero Motors.
2. BASIC REQUIREMENT Steel source: - as per Document HM/STEEL STD dated 1 st April 07 and latest revision of appendix 1. The forger will ensure that the steel is not used for manufacturing blanks for Hero without prior approval of Hero.
3. INSPECTION BY FORGER The forging vendor will inspect the steel completely as per the standard given above before offering the steel to Hero Motors.
4. SAMPLE DETAILS The forger will submit the following samples per heat for cross checking at HML Two billet slices (1 thick) from different billets. One jominy sample from forged bar.
5. APPLICABLE DOCUMENTS The steel sample should be offered along with the following:- Letter of forging party mentioning part number for which steel is offered. Forging party should submit metallurgical test report as asked in the steel standard mentioned above. Original steel mill test certificate with the below mentioned parameters. 1) Name of the steel mill 2) Heat No., grade of steel, diameter, number of bars & total weight. 3) Manufacturing route 4) All inspection done by the steel mill of points 7.1 to 7.9
GENERAL CONDITION FOR PROCURING AND OFFERING STEEL
DOC. HM/LB/STD/001 EFF. DATE 01.01.08 Rev 00 PAGE 2 OF 2
DHARMENDRA MISHRA PREPARED BY
RAMAN RAMCHANDRAN APPROVED BY CONTROL STATUS
HERO MOTORS LIMITED, GHAZIABAD.
6. HEAT CODE APPROVAL Hero Motors would allot Forging Punch code to approved heat. This code to be embossed on all forgings made from that heat. Only those parts should be forged from the heat which have been mentioned by the forger. In case, the forger needs to forge different part from the heat prior approval to be taken.
Oxy-Acetylene Welding and Cutting
Electric, Forge and Thermit Welding together with related methods and materials used in metal working and the oxygen process for removal of carbon