ME C85 / CE C30 - Section 1 Introduction to Solid Mechanics Homework 6 Due 4:30 pm, friday, october 14. Determine the strength that the cable connecting hole A and pin C must have, assuming that the cable is 5 mm in diameter.
ME C85 / CE C30 - Section 1 Introduction to Solid Mechanics Homework 6 Due 4:30 pm, friday, october 14. Determine the strength that the cable connecting hole A and pin C must have, assuming that the cable is 5 mm in diameter.
ME C85 / CE C30 - Section 1 Introduction to Solid Mechanics Homework 6 Due 4:30 pm, friday, october 14. Determine the strength that the cable connecting hole A and pin C must have, assuming that the cable is 5 mm in diameter.
University of California, Berkeley Department of Mechanical Engineering
Fall, 2011 Professor George C. Johnson
ME C85/CE C30 Section 1 ME C85/CE C30 Section 1 Introduction to Solid Mechanics
Homework 6 Due 4:30 pm, Friday October 14
1. Problem 8.2.
2. Problem 8.13
3. Problem 8.24. Also determine the strength that the cable connecting hole A and pin C must have, assuming that the cable is 5 mm in diameter.
University of California, Berkeley Department of Mechanical Engineering Fall, 2011 Professor George C. Johnson ME C85/CE C30 Section 1 4. Problem 8.28.
5. Problem 8.38.
6. Problem 8.43. Solve this problem as written, and also for the case where the vertical force P acts upward ra- ther than downward.