Professional Documents
Culture Documents
Training Report ON Auto-Cad & Solid Works AT Haryana Engineering College, Jagadhri
Training Report ON Auto-Cad & Solid Works AT Haryana Engineering College, Jagadhri
ON
AUTO-CAD & SOLID WORKS
AT
Haryana Engineering College, Jagadhri
Submitted in partial fulfillment of requirements for the award of the degree of
BACHELOR OF TECHNOLOGY
IN
MECHANICAL ENGINEERING
SUBMITTED BY:
DINESH KUMAR
1812503
SUBMITTED TO:
Er. ABHISHEK KAMBOJ
Head, Department of Mechanical Engineering
ACKNOWLEDGEMENT
Many persons have contributed me in my training to learn AutoCAD and Solid Works used
by just about every Engineering and Design office in the world. I would specially like to
appreciate my Guide Mr. Gourav Sharma for his support, encouragement and his continuous
efforts towards developing my skills.
I acknowledge the help and cooperation received from all the faculty members of Cadd
Centre & HEC , Jagadhri. I would also like to thank Er. Shanti Parkash to conduct my
training and his valuable guidance. Several colleagues and students have contributed directly
and indirectly to enhance my skills, as they had given me numerous ideas and suggestions.
Their help gave me the much needed hints about the areas that needed to be improve.
I would welcome further suggestions to enhance the skills to present them with greater
clarity.
Vikas
1812570
TABLE OF CONTENTS
1) INTRODUCTION 1
2) COORDINATE SYSTEM
2.1) Absolute Coordinate system. 2
2.2) Relative Rectangular Coordinate system.. 2
2.3) Relative Polar Coordinate system. 2
3) AutoCAD.
3-4
4) Commands
4.1) Circle. 5
4.2) Arc. 5
4.3) Ellipse 5
4.4) Erase.. 5
4.5) Undo.. 6
4.6) Move. 6
4.7) Copy.. 6
4.8) Rotate. 7
4.9) Mirror. 7
5) Drafting Settings
5.1) Grid and Snap. 8
5.2) Ortho.. 8
5.3) Polar Tracking.......... 8
5.4) Array. 9
5.4-1) Rectangular Array... 9
10
10
5.5) Trim.
11
5.6) Extend.
11
5.7) Break..........
11
5.8) Chamfer..
12
5.9) Fillet
12
Exercise.
13
6) SolidWorks.
14
7) Modules in SolidWorks
7.1) Part Modeling
15
15
16
16
8) Features of SolidWorks
8.1) Feature-based
17
8.2) Parametric
18
18
8.4) Relations.....
18
18
19
8.7) Constraints..
19
9) Sketcher..
20-21
22
22
23
23
10.4) Mirror...
24
24
25
25
26
10.8-1) Linear.
26
11) 3D Sketching
11.1) Extruded Boss/ Base Feature.
27
28
28
29
29
12) Exercise:..
30
13) References:..
31