Professional Documents
Culture Documents
http://www.ati-networktraining.com
Try The Program Now, 100% Risk Free, Exam Pass Guaranteed or money
back
instant download
http://www.ati-networktraining.com
Answer: C
Explanation: The multicast address reserved for DR and BDR is
224.0.0.6.
2. Which is the multicast address to which the DR sends the LSU and to
which all OSPF routers listen for hello messages and updates?
A. 224.0.0.5
B. 224.0.0.7
C. 224.0.0.6
D. 225.0.0.05
Answer: A
Explanation: The multicast address to which the DR sends the
LSU and to which all OSPF routers listen for hello messages and
updates is 224.0.0.5.
Answer: C
Explanation: A neighbour relationship can be formed only when the
hello/dead intervals, known neighbours, area ID, priority, DR
address, BDR address, stub area flags (if they exist) and
authentication password match in the hello LSAs.
Answer: B
Explanation: It is said that the devices have formed an adjacency
after the topology tables are synchronized.
Answer: C
Explanation: The loopback interfaces typically have a
255.255.255.255 subnet mask.
Answer: C
Explanation: The command for starting the OSPF process for
configuration is ‘router ospf’.
Answer: C
Explanation: The process ID is a locally significant number between
1 and 65535.
8. Because of the fact that you have no longer the luxury to put a classful
subnet in the network statement of OSPF routers, what can be used for
telling IOS how much of an IP address should be applied to a criteria in
a configuration statement?
A. Loopcard mask
B. Wildcard mask
C. Widthcard mask
D. Windcard mask
Answer: B
Explanation: The wildcard mask is telling the router what specific IP
subnets have to be applied to the OSPF routing process.
10. The wildcard masks are represented as 32-bit numbers separated into
four octets and each bit corresponds to the same bit position in the IP
address. What happens in the case that the bit value in a wildcard mask
is 0?
A. The corresponding IP address is ignored
B. The corresponding IP address is checked
C. The corresponding IP address is not applied to the criteria
D. The corresponding IP address is cancelled.
Answer: B
Explanation: If the bit value in a wildcard mask is 0, the
corresponding IP address is checked and applied to the criteria.
11. Supposing you want to specify the wildcard mask of the 10.1.4.2 IP
address. Which will be the wildcard mask for that specific address in
decimals?
A. 1.1.1.1
B. 0.0.0.1
C. 1.0.1.0
D. 0.0.0.0
Answer: D
Explanation: the wildcard mask for the 10.1.4.2 IP address in decimals
is 0.0.0.0.
12. If the IP address value is 0.0.0.0, what value will the wildcard mask
have?
A. 155.155.155.155
B. 0.0.0.0
C. 255.255.255.255
D. 244.244.244.244
Answer: C
Explanation: If the IP address value is 0.0.0.0, the wildcard mask will
be 255.255.255.255.
Answer: C
Explanation: The resultant wildcard mask will be in this case
192.168.1.0 0.0.0255
Answer: D
Explanation: For the 192.168.1.4/30, your statement would look like
192.168.1.4.0.0.0.3.
640-802 CCNA Exam Simulator Software (3,000 Total Questions)
http://www.ati-networktraining.com
Try The Program Now, 100% Risk Free, Exam Pass Guaranteed or money
back
instant download
http://www.ati-networktraining.com