Professional Documents
Culture Documents
Code and Standards List - 2014
Code and Standards List - 2014
No
1
2
3
4
5
6
7
AISCC
ANSI / FCI 70.2
ANSI B.18.22.1
ANSI B1.1 (UNC)/ ANSI
B.18.2.2
API 2B
API 2C
API 2W
API 2Y
9
10
API 5L
API 6A
11
API 6AF
12
13
API 6D
API 7B-11C
14
15
API 12J
API 14C
16
API 14E
17
API 14G
18
API 14J
19
API 15HR
20
21
API 16C
API 75
22
API 500
23
API 505
Title
American Institute of Steel Construction
Control Valve Seat Leakage
Plain Washer
Bolt and Nut Thread (Unied Coarse Thread)
Specification for the Fabrication of Structural Steel Pipe
Offshore Cranes
Specification for Steel Plates for Offshore Structures, Produced by
Thermo-Mechanical Control Processing (TMCP)
Specification for Steel Plates, Quenched-and-Tempered, for Offshore
Structures
Seamless and Welded Steel Line Pipe
Specification for Wellhead and Christmas Tree Equipment, Twentieth
Edition (ISO 10423:2009 Modification), Includes Errata (through
November 2013), Addenda 1(Nov 2011), 2 (Nov 2012), 3 (March
2013)
Technical Report on Capabilities of API Flanges under
Combinations of Load
Specification for Pipeline Valves
Specification for Internal-Combustion Reciprocating Engines for Oil
Field Service
Specification for Oil and Gas Separators
Analysis, Design, Installation, and Testing of Basic Surface Safety
Systems for Offshore Production Platforms
Recommended Practice for Design and Installation of Offshore
Products Platform Piping Systems
Recommended Practice for Fire Prevention and Control on Fixed
Open-type Offshore Production Platforms, Fourth Edition
Recommended Practice for Design and Hazards Analysis for Offshore
Production Facilities
Specification for High Pressure Fiberglass Line Pipe, Includes
Addendum/Errata 1 and Errata 2 (2008)
API 16C
Recommended Practice for Development of a Safety and
Environmental Management Program for Offshore Operations and
Facilities
Recommended Practice for Classification of Locations for Electrical
Installations at Petroleum Facilities Classified as Class I, Division I and
Division 2
Recommended Practice for Classification of Locations for Electrical
Installations at Petroleum Facilities Classified as Class I, Zone 0, and
Zone 2
1 of 42
No
Title
24
API 520
25
API 521
26
27
28
29
30
31
32
33
34
API 526
API 534
API 594
API 598
API 599
API 607
API 608
API 609
API 610
35
API 612
36
37
API 615
API 616
38
API 617
39
API 618
40
API 619
41
42
43
44
45
API 670
API 674
API 675
API 676
API 677
46
API 682
47
48
API 750
API 752
49
API 754
50
API 2000
51
API 2030
2 of 42
No
52
API 2218
53
API RP 2FPS
54
API RP 2SK
55
API RP 2A WSD
56
57
58
59
60
61
API RP 550
API RP 551
API RP 554
API RP 555
API RP 576
API RP 2201
62
63
64
65
66
67
68
69
ASCE 41088
70
71
72
73
ASME B1.1
ASME B1.20.1
ASME B16.1
ASME B16.5
74
75
76
77
ASME B16.9
ASME B16.10
ASME B16.11
ASME B16.20
78
79
80
81
82
83
84
ASME B16.21
ASME B16.25
ASME B16.34
ASME B16.36
ASME B16.47
ASME B16.48
ASME B31.3
Title
Fireproofing Practices in Petroleum & Petrochemical Processing
Plants
Recommended Practice for Planning, Designing, and Construction
Floating Production Systems
Recommended Practice for Design and Analysis of Station keeping
Systems for Floating Structures
Recommended Practice for Planning, Designing and Constructing
Fixed Offshore PlatformsWorking Stress Design
Installation of Refinery Instruments and Control Systems
Process Measurement Instrumentation
Process Control Systems.
Process Analyzers
Inspection of Pressure Relieving Devices
Safe Hot tapping Practices in the Petroleum and Petrochemical
Industries
Specification for Carbon Manganese Steel Plate with Improved
Toughness for Offshore Structures
Rolled Shapes with Improved Notch Toughness
Specification for Carbon Manganese Steel Plate for Offshore
Platform Tubular Joints, Ninth Edition
Specification for Fire test for Valves
Seat Tightness of Pressure Relief Valves with Metal to Metal Seats
Bolted Bonnet Steel Gate Valves for Petroleum & Natural Gas
Industries
Compact Steel Gate Valves, Flanged, Threaded, Welding and
Extended-Body Ends
Design of Blast-Resistant Buildings in Petrochemical Facilities
Unified Inch Screw Threads
Pipe Thread, General Purpose (Inch)
Cast Iron Pipe Flanges and Flanged Fittings
Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24
Metric/Inch Standard
Butt Welding Pipe Fittings
Face-to-Face and End-to-End Dimensions of Valves
Fittings Socket Weld and Threaded
Metallic Gaskets for Pipe Flanges Ring Joint, Spiral Wound and
jacketed
Gaskets Non-Metallic
Buttwelding Ends
Valves Flanged, Threaded and Welding Ends
Orifice Flanges
Flanges Large
Steel Line Blanks
Process Piping
3 of 42
No
85
86
87
88
89
90
91
92
93
94
95
96
97
98
ASTM
99
100
101
102
103
ASTM
ASTM
ASTM
ASTM
ASTM A307 Grade A
104
105
106
107
ASTM A325
ASTM A563
ASTM B21
ASTM D1250
Title
BS 336
BS 476
BS 1041
BS 1553-1
117 BS 1635
4 of 42
No
118 BS 1646
119 BS 1655
120 BS 1868
121 BS 1873
122 BS 2562
123 BS 2752
124 BS 2765
125 BS 2853
126
127
128
129
BS 2915
BS 3463
BS 3692
BS 3799
130 BS 3939
131 BS 3958
Title
Symbolic Representation for Process Measurement Control
Functions and Instrumentation
Specification for Flanged Automatic Control Valves for the Process
Control Industry (Face-to-Face dimensions)
Steel Check Valves
Steel Globe Valves
Specification For Cable Boxes For Transformers and Reactors
Specification for chloroprene rubber compounds
Specification for dimensions of temperature detecting
elements and corresponding pockets
Specification for the design and testing of steel overhead runway
beams
Specification for Bursting discs and bursting disc devices
Observation and Gauge Glasses for Pressure Vessels
ISO metric precision hexagon bolts, screws and nuts
Specification for Steel Pipe Fittings, Screwed and Socket-Welding for
the Petroleum Industry
Graphical Symbols for Electrical Power,
telecommunications and Electronic Diagrams
Specification for bonded man-made Mineral Fibre slabs
132
BS 4190
133 BS 4211
134 BS 4568
135 BS 4592
136 BS 4882
137
138
139
140
141
BS 5070
BS 5154
BS 5306
BS 5353
BS 5395
142 BS 5422
143 BS 5500
144
BS 5925
145 BS 6121
146 BS 6169
147 BS 6231
148 BS 6387
5 of 42
No
149 BS 6391
Title
Specification for Non-Percolating Lay Flat Delivery Hoses and Hose
Assemblies for Fire Fighting Purposes
150 BS 6447
Absolute and Gauge Pressure transmitters with electrical outputs
151 BS 6472
152 BS 6656
153 BS 6739
154 BS 6883
155 BS 6946
156 BS 7159
157 BS 7371-6 +A1
158 BS 7405
159 BS 7671
160 BS 7910
161 BS 8010
162 BS 8888
163 BS EN 3-7
164 BS EN 378
165 BS EN 593
166 BS EN 779
167 BS EN 837
168 BS EN 1515
169 BS EN 1591
170 BS EN 1838
171 BS EN 1982
172 BS EN 1993-3
173 BS EN 1991-1
174 BS EN 10025
175 BS EN 10029
176 BS EN 10088
177 BS EN 10204
6 of 42
No
178 BS EN 10210
179 BS EN 10225
180 BS EN 10346
181 BS EN 12068
182 BS EN 12079
183 BS EN 12266
184
185
186
187
188
189
BS EN 12385
BS EN 12464
BS EN 12473
BS EN 12495
BS EN 12570
BS EN 12665
190 BS EN 12696
191 BS EN 12954
192 BS EN 13001
193 BS EN 13173
194
BS EN 13414
195 BS EN 13480
196 BS EN 13509
197 BS EN 13636
198 BS EN 13771
199 BS EN 13823
Title
Hot finished structural hollow sections of non-alloy and fine grain
steels.
Weldable structural steels for fixed offshore structures. Technical
delivery conditions
Continuously hot-dip coated steel flat products. Technical delivery
conditions
CP and External Coatings for Pipelines
Offshore containers and associated lifting sets. Offshore containers.
Design, manufacture and marking
Industrial valves. Testing of metallic valvesPressure tests, test
procedures and acceptance criteria.
Steel wire ropes. Safety General requirements
Lighting of work places. Outdoor work places
General Principles of Cathodic Protection in Sea Water
CP of Fixed Steel Offshore Structures
Valve Operation Sizing
Light and lighting. Basic terms and criteria for specifying lighting
requirements
CP of Steel in Concrete
CP of Buried or Immersed Metallic Structure
Cranes. General design General principles and requirements
CP of Steel, Floating Offshore Structures
Steel wire rope slings. Safety Slings for general lifting service
Metallic Industrial Piping
CP Measurement Techniques
CP of Buried Metal Tanks & Piping
Refrigerant Compressors
Reaction to fire tests for building products.Building products
excluding floorings exposed to thermal attack by a single burning
item
200 BS EN 14161
201 BS EN 14175
202 BS EN 14399-1
203 BS EN 14505
204 BS EN 15112
205 BS EN 22553
206 BS EN 50172
207 BS EN 50173
208 BS EN 50174
209 BS EN 50262
210 BS EN 50288
7 of 42
No
Title
211 BS EN 50563
212 BS EN 55022
213 BS EN 55024
214
215
216
217
218
219
220
BS EN 60079
BS EN 60309
BS EN 60534
BS EN 60598
BS EN 60794.1.2
BS EN 60896
BS EN 60898
External a.c.. d.c. and a.c.. a.c. power supplies. Determination of noload power and average efficiency of active modes
Information technology equipment Radio disturbance
characteristics Limits and methods of measurement
Information technology equipment - Immunity characteristics Limits and methods of measurement
Electrical Apparatus for Explosive Gas Atmospheres
Plugs, socket-outlets and couplers for industrial purposes
Flow Equations for Sizing Control Valves
Luminaires.
Optical fibres, product specifications Test procedures
Stationary lead-acid batteries
Electrical accessories Circuit breakers for overcurrent protection
for household and similar installations Circuit-breakers for a.c.
operation
221 BS EN 61082
222 BS EN 61204
223 BS EN 61543
224 BS EN 61558
225 BS EN 62034
226 BS EN ISO 1461
8 of 42
No
Title
BS EN ISO 10434
BS EN ISO 10497
BS EN ISO 10715
BS EN ISO 11925
246
247
248
249
BS EN ISO 12499
BS EN ISO 12944
BS EN ISO 13480
BS EN ISO 13501
9 of 42
No
Title
10 of 42
No
Title
290 BS EN 61000
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
11 of 42
No
308 ICAO
309
310
311
312
313
314
IEC 60028
IEC 60034
IEC 60038
IEC 60044
IEC 60050
IEC 60051
315
316
317
318
IEC 60059
IEC 60060
IEC 60071
IEC 60072
Title
International Civil Aviation Organisation Aeronautical
Telecommunications Annex 10
International standard of resistance for copper
Rotating Electrical Machines
IEC Standard Voltages
Instrument transformers Part 1: Current transformers
International Electrotechnical Vocabulary
Direct acting indicating analogue electrical measuring instruments
and their accessories - Part 1: Definitions and general requirements
common to all parts.
IEC standard current ratings
High voltage test techniques
Insulation co-ordination
Dimensions and output rating for rotating electrical machines
Power transformers
Electrical Apparatus for explosive gas atmospheres. Part 0: General
Requirements
Electrical insulation - Thermal evaluation and designation
Electrical Installations in Ships
Cables for radio frequencies
Surge arresters
Method for determining the proof and the comparative tracking
index of Solid insulating materials
Dimensions of brushes and brush-holders for electrical machines
322
323
324
325
326
IEC 60085
IEC 60092
IEC 60096
IEC 60099
IEC 60112
IEC 60137
IEC 60145
IEC 60146
IEC 60156
332
333
334
335
IEC 60158
IEC 60169-1 AMD 1
IEC 60183
IEC 60189
336
337
338
339
340
IEC 60204
IEC 60211
IEC 60214
IEC 60215
IEC 60227
12 of 42
No
Title
High-voltage fuses
Electric cables
Power cables with extruded insulation and their accessories for rated
voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV)
362
363
364
365
366
IEC 60534
IEC 60584
IEC 60598
IEC 60617 DB SNAPSHOT
IEC 60622
13 of 42
No
Title
IEC 60909
IEC 60947
IEC 60950
IEC 61000
IEC 61008
Electrical installations of ships and mobile and fixed offshore units Part 1: Procedures for calculating short-circuit currents in threephase a.c.
Converter transformers
Low-voltage switchgear and controlgear assemblies
Functional Safety of Electrical/Electronic/Programmable Electronic
Safety Related Systems
Functional Safety Safety Instrumented Systems for the Process
industry Sector
Thermowells
Cable management - Cable tray systems and cable ladder systems
14 of 42
No
IEC 61869
IEC 61892
IEC 61914
IEC 61935
Title
Panel mounted equipment - Electrical measuring instruments Dimensions for panel mounting
Safety of power transformers, power supplies, reactors and similar
products.
Part 1: General requirements and tests
Electro acoustics - Sound level meters
Adjustable speed electrical power drive systems
Communication networks and systems for power utility automation
Instrument transformers
Mobile and fixed offshore units -Electrical installations
Cable cleats for electrical installations
Specification for the testing of balanced and coaxial information
technology cabling.
Low-voltage switchgear and controlgear - Controller-device
interfaces (CDIs)
Uninterruptible power systems (UPS)
Electricity metering equipment (AC) - General requirements, tests
and test conditions
Electricity metering equipment (a.c.) - Particular requirements
Secondary cells and batteries containing alkaline or other non-acid
electrolytes - Nickel-cadmium prismatic secondary single cells with
partial gas recombination
Degrees of protection provided by enclosures for electrical
equipment against external mechanical impacts (IK code)
High-voltage switchgear and controlgear - ALL PARTS
Protection against lightning
Electrical resistance trace heating systems for industrial and
commercial applications
Obsolescence management - Application guide
Cable glands for electrical installations
Specification for radio disturbance and immunity measuring
apparatus and methods
Electromagnetic Compatibility (EMC)
Maritime navigation and radio communication equipment and
systems
Shipboard telecommunications cables and radio frequency cables.
General instrumentation, control and communication cables
Terminal and tapping markings for power transformer
Guide for test procedure for the measurement of loss tangent of
coils and bars for machine windings
Low-voltage switchgear and controlgear assemblies
Enclosed low-voltage switchgear and controlgear assemblies - Guide
for testing under conditions of arcing due to internal fault
Analyser Systems
15 of 42
No
IEEE 730
IEEE 802.11
IEEE 802.1D
IEEE 802.3
IEEE 828
IEEE 829
IEEE 830
IEEE 1008
IEEE 1012
Title
Instrument transformers - The use of instrument transformers for
power quality measurement
Measurement methods applicable to radio transmitters
Measurement methods for radio receivers of different classes
of emission
Recommendations For The Electrical And Electronic Equipment Of
Mobile And Fixed Offshore Installations
Recommended Practices and Requirements for Harmonic Control in
Electrical Power Systems
Standard for Software Quality Assurance Plans (ANSI)
Wireless LAN Medium Access Control
Rapid reconfiguration of spanning tree recommendation
CSMA/CD (Ethernet)
Standard for Software Configuration Management Plans (ANSI)
Standard for Software Test Documentation
Guide for Software Requirements Specifications (ANSI)
Standard for Software Unit Testing (ANSI)
Standard for Software Verification and Validation Plans (ANSI)
ISA 5.1
ISA 7.0.1
ISA 51.1
ISA 75.01
ISA 75.03
ISA 75.16
ISA TR 99 All Parts
ISO 834
ISO 14313
ISO/IEC Directives, Part 2
16 of 42
No
ITU-T G.114
ITU-T G.131
ITU-T G.652
ITU-T G.653
ITU-T G.654
ITU-T G.655
ITU-T G.707
ITU-T G.708
ITU-T G.711
ITU-T G.729
480
481
482
483
ITU-T G.780
ITU-T G.783
ITU-T G.784
ITU-T G.803
Title
Guidelines for evaluation of radio transmission
Ground-wave propagation curves for frequencies between 10 kHz
and 30 MHz
Calculation of free-space attenuation
Propagation curves for aeronautical mobile and radio navigation
services using the VHF, UHF and SHF bands
Propagation data and prediction methods required for the design of
terrestrial line-of-sight systems.
Propagation data and prediction methods
Space operation systems. Frequencies, bandwidths and protection
criteria
Guidance on one-way delay for Voice over IP
Talker echo and its control
Single mode fibres (1300 nm)
Single mode fibres (1550 nm)
Single mode fibres (1530 - 1625 nm)
Single mode fibres (1530 - 1565 nm)
SDH network node interface
SDH network node interface
Pulse code modulation for Voice frequencies
Coding of speech at 8kbit/s using conjugate- structure algebraic
code excited linear prediction
SDH vocabulary
SDH equipment functional blocks
SDH Management.
Architecture of transport networks based on the synchronous digital
hierarchy (SDH)
Generic functional architecture of transport networks
Timing characteristics of SDH equipment slave clocks (SEC)
The control of jitter and wander within digital networks which are
based on the 2048 kbit/s hierarchy
The control of jitter and wander within digital networks which are
based on the synchronous digital hierarchy (SDH)
End-to-end error performance parameters and objectives for
international, constant bit-rate digital paths and connections
Error performance parameters and objectives for international,
constant bit rate synchronous digital paths
Types and characteristics of SDH network protection
architectures
Interworking of SDH protection architectures
Architecture of optical transport networks
Parameters and calculation methodologies for reliability and
availability of fibre optic systems
Optical interfaces for equipments and systems relating to the
synchronous digital hierarchy
Repeatered optical submarine systems
17 of 42
No
Title
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
ITU-T M.2120
Fault detection (PDH and SDH)
ITU-T M.3010
Principles for a Telecommunication Management Network
ITU-T M.3100
Generic Network Information Model
ITU-T RECOMMENDATI ON T.30
for document facsimile transmission in the general switched
telephone network
ITU-T RECOMMENDATI ON T.37
Procedures for the transfer of facsimile date via store-and forward
on the Internet
ITU-T RECOMMENDATI ON T.38
Procedures for real-time Group 3 facsimile communication
over IP networks
ITU-T X.209
Encoding rules specification of Basic Encoding Rules
ITU-T X.690
Encoding rules specification of Basic Encoding Rules
MSS SP6
Standard Finishes for Contact Faces of Pipe Flanges and ConnectingEnd Flanges of Valves and Fittings
MSS SP25
Standard Marking System for Valves, Fittings, Flanges and Unions
Steel Pipe Line Flanges
MSS SP44
Fittings High Yield Steel
MSS SP75
Bronze Gate, Globe, Angle and Check Valves
MSS SP80
Branch Outlet Fittings
MSS SP97
NACE MR0175/ISO 15156
Petroleum and natural gas industries. Materials for use in H2Scontaining.Environments in oil and gas production
FIRE CODE
NFPA 1
NFPA 10
Standard for Portable Fire Extinguishers
NFPA 11
Standard for Low, Medium and High Expansion Foam
NFPA 11A
STANDARD FOR MEDIUM AND HIGH EXPANSION FOAM SYSTEMS
NFPA 12
Standard on Carbon Dioxide Extinguishing Systems
NFPA 13
Installation of Sprinkler Systems
NFPA 14
STANDARD FOR THE INSTALLATION OF STANDPIPE AND HOSE
SYSTEMS
NFPA 15
Standard for Water Spray Fixed Systems for Fire Protection
NFPA 16
Standard for Installation of Foam-Water Sprinkler and FoamWater Spray Systems
NFPA 17
Standard for Dry Chemical Extinguishing Systems
NFPA 17A
Standard for Wet Chemical Extinguishing Systems
18 of 42
No
528 NFPA 20
529 NFPA 30
530 NFPA 72
531 NFPA 75
532 NFPA 76
533 NFPA 90A
534 NFPA 96
535 NFPA 101
536 NFPA 111
537 NFPA 496
538 NFPA 750
539 NFPA 2001
Title
Standard for the Installation of Stationary Fire Pumps for Fire
Protection
FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
National Fire Alarm and Signalling Code
STANDARD FOR THE FIRE PROTECTION OF INFORMATION
TECHNOLOGY EQUIPMENT
STANDARD FOR THE FIRE PROTECTION OF TELECOMMUNICATIONS
FACILITIES
Standard for the Installation of Air-Conditioning and Ventilating
Systems
Standard for Ventilation Control and Fire protection of Commercial
Cooking Operations
LIFE SAFETY CODE
STANDARD ON STORED ELECTRICAL ENERGY EMERGENCY
Standard for Purged and Pressurised Enclosures for Electrical
Equipment
Standard for Water Mist Fire protection Systems
Standard for Clean Agent Fire Extinguishing Systems
19 of 42
No
Title
Offshore Loading Buoys
Design of Free Fall Lifeboats
Underwater Deployment and Recovery Systems
Submarine Pipeline Systems
Dynamic Risers
Marine Operations, General
Marine Operations, Design and Fabrication
Load Transfer Operations
Transit and Positioning of Offshore Units
Offshore Installation Operations (VMO Standard Part 2-4)
Design of Offshore Wind Turbine Structures
Design of Floating Wind Turbine Structures
Offshore Substations for Wind Farms
Wind Turbine Installation Units
20 of 42
No
Title
21 of 42
22 of 42
23 of 42
24 of 42
25 of 42
26 of 42
27 of 42
28 of 42
29 of 42
30 of 42
31 of 42
32 of 42
33 of 42
34 of 42
35 of 42
36 of 42
37 of 42
38 of 42
39 of 42
40 of 42
r FE analysis Methods
f Bonded Repair of Steel Structures
41 of 42
Mechanical Equipment
e Energy Applications
42 of 42