Professional Documents
Culture Documents
Install PNMT Win2000
Install PNMT Win2000
071116
P
N
M
T
ASOLINK
ETWORK
ANAGEMENT
ERMINAL
NEC Corporation
Copyright 2007
ROI-S06553
Table of Contents
1.
2.
3.
4.
5.
6.
7.
-i-
ROI-S06553
1.
Installation Sequence
Only Administrator group privilege level users are authorized to configure the following settings,
Step 1: Phone and Modem Options Setting
-1-
ROI-S06553
2.
(2)
Click the Phone and Modem Options icon in the Control Panel window to start
configuring the modem. Select the Modem tab, and click [Add] to continue with adding the
new modem for the PNMT.
-2-
ROI-S06553
(3)
(4)
Select Standard Modem Types from the list of Manufacturers and Standard 19200bps
Modem from the Models. Click [Next] to continue.
-3-
ROI-S06553
(5)
Select Selected ports and COM1, then click [Next] to continue. If you are using a
multi-port configuration, select All ports to install the standard 19200 bps modem driver
for all available COM ports.
(6)
-4-
ROI-S06553
(7)
Verify that Standard 19200 bps Modem and COM1 are displayed. Click [OK].
-5-
ROI-S06553
3.
(2)
Select Search for a suitable driver for my device [recommended] and click [Next] to
continue.
-6-
ROI-S06553
(3)
Insert the USB driver CD-ROM in the computers disk drive and check CD-ROM drives then,
click [Next].
(4)
Click [Yes] in the Hardware Installation pop-up alert, and then USB Modem Driver
Installation starts.
-7-
ROI-S06553
(5)
-8-
ROI-S06553
4.
Dial-up Setting
(1)
Click Start | Settings | Control Panel, and then in the Control Panel window, click the
Network and Dial-up Connections icon to start configuring the Dial-up Setting.
(2)
The Network and Dial-up Connections window will appear. Click Make New
Connection..
-9-
ROI-S06553
(3)
(4)
- 10 -
ROI-S06553
(5)
- 11 -
ROI-S06553
(6)
Enter any desired number in the Phone number field. Click [Next] to continue.
(7)
- 12 -
ROI-S06553
(8)
In the Network Connection Wizard window, input connection name into Editbox.
Click [Finish].
In case of connecting with RS232C-Type [PNMT(RS232C)]
- 13 -
ROI-S06553
(9)
Click [Cancel] in the Connect PNMT dial-up connection window to continue. Next click
Properties window.
(10)
In the Properties window, click on the General tab .Click Configure to proceed.
RS232C setting
USB setting
- 14 -
ROI-S06553
(11)
In the Modem Configuration window, uncheck all boxes in the Hardware features and
Initialization fields.
RS232C setting
(12)
USB setting
Retain the default setting displayed on the Option tab, and click the Security tab.
RS232C setting
USB setting
- 15 -
ROI-S06553
(13)
Retain the default setting displayed on the Security tab and click the Networking tab.
RS232C setting
(14)
USB setting
Verify that PPP: is displayed in the Type of dial-up server I am calling field, and that File
and Printer... and Client for Microsoft... are unchecked on the Networking tab.
RS232C setting
USB setting
- 16 -
ROI-S06553
(15)
Click Settings. Uncheck all boxes so that the window will look exactly as shown below.
Click [OK] to go back to the previous window. Highlight Internet Protocol (TCP/IP) and
then click Properties.
(16)
Verify that both Obtain an IP address automatically and Obtain DNS server address
automatically are selected.
- 17 -
ROI-S06553
(17)
In the Advanced TCP/IP Settings window, uncheck Use IP header compression in the
PPP link field on the General tab. Click [OK].
- 18 -
ROI-S06553
5.
Select Start Setting Control Panel, then in the Add/Remove Programs window,
click Add/Remove Windows Components.
(2)
The Windows Components Wizard window appears. Remove the check from
Management and Monitoring Tools and click Details...
- 19 -
ROI-S06553
(3)
The Management and Monitoring Tools window appears. Confirm that Simple Network
Management Protocol is not checked and click [OK]. Return to above window and click
[Next].
(4)
- 20 -
ROI-S06553
To stop SNMP Service without removing it, click Administrative Tools in the Control
Panel window.
(6)
- 21 -
ROI-S06553
(7)
Confirm that SNMP Service is installed and that it has started automatically. Select Action
Properties on the menu bar of the Services window, or right-click SNMP Service and
then click Properties in the SNMP Service menu.
(8)
Select Manual in the Startup type field and click Stop in the Service status field on the
General tab. Click [OK] or [Apply].
- 22 -
ROI-S06553
(9)
Confirm that the Status of both SNMP Service and SNMP Trap Service is stopped, and that
the Startup condition for each one is Manual.
(10)
- 23 -
ROI-S06553
6.
PNMT Setup
NOTE
If PNMT software has already been installed, please uninstall
it before you install a new version.
(1)
Insert the PNMT Installation CDROM. Open the CDROM folder and double-click
install.exe.
(2)
- 24 -
ROI-S06553
(3)
(4)
NOTE
The default path is C:\PNMTj. It is not possible to include
blank spaces as in Program Files. (C denotes the
directory where the currently running OS is installed)
- 25 -
ROI-S06553
(5)
Choose:
Click this button to choose the license key folder
NOTE
If no License Key file is available, operation in the Trial
mode is possible.
IMPORTANT: IMMEDIATE IMPORT OF LICENSE
You may use the PNMT on a trial basis for 30 days. After
that the PNMT can ONLY be used IF the license has been
imported (activated). To obtain the license please contact
NEC.
- 26 -
ROI-S06553
(6)
Click [Install].
(7)
- 27 -
ROI-S06553
(8)
- 28 -
ROI-S06553
7.
Launching PNMT
(1) Click Start | Programs | PNMTj | PNMT to start the application.
(2) Enter User name and Password and select Connection Entry:
After installation of PNMT, the initial / default password will be:-.
User name:
Password:
Connection:
admin
(There is no initial password . Just press Enter.
A password can then be set.)
Select Dialup and PNMT(RS232C)/PNMT(USB) entry.
- 29 -
ROI-S06553
NOTE
If another application is using the SNMP Port, application
initialization will not be possible; the application will shut
down, and the following message will appear.
- 30 -