Professional Documents
Culture Documents
1 de 9
http://www.solidworkstutorials.com/2008/10/tutorial-5-create-12-hex-bolt/
SolidWorks Tutorials
A step by step SolidWorks tutorial for beginner
Home
About
Advertise
2. Extrude
sketch to 0.34in.
2 de 9
http://www.solidworkstutorials.com/2008/10/tutorial-5-create-12-hex-bolt/
3. Create minor diameter for thread, sketch circle on top face, set diameter to 0.4in.
4. Extrude sketch to 1.1in.
3 de 9
http://www.solidworkstutorials.com/2008/10/tutorial-5-create-12-hex-bolt/
Ok.
4 de 9
http://www.solidworkstutorials.com/2008/10/tutorial-5-create-12-hex-bolt/
10. Finish.
ShareThis
5 de 9
http://www.solidworkstutorials.com/2008/10/tutorial-5-create-12-hex-bolt/
Learn SolidWorks today! Ive wrote a complete SolidWorks 2010 Beginner Tutorials e-book for you to start with, get it now!
Instantly download complete tutorials limited time offer price ($12 USD). Buy now!
why is it that when I click on end edge of thread shaft convert entities is not highlighted, I had the same problem
with previous tutorial on embossing text on curved surface. after creating text on plane, the warp command was not
highlighted. I dont understand why this is happening. please help
2. Maraden
March 30th, 2009 at 8:59 am
Make sure you have sketch clicked,other wise it will not hightlight.I had the same problem until I got it ^^
4. Zack
6 de 9
http://www.solidworkstutorials.com/2008/10/tutorial-5-create-12-hex-bolt/
Hi guys,
You welcome
5. Con Borg
April 24th, 2009 at 10:04 am
I was looking at your tutorial on creating a 1/2-13 bolt. I was just wondering in step #7, how you calculated the
dimensions of the tooth side profile. I found the tutorial very helpful Thanks. I do look forward in hearing how you
calculated that profile, because I wouldnt know how to calculate it for a 3/8 bolt, or any other bolt. I appreciate any
help on this.
Con
6. Zack
April 25th, 2009 at 4:04 am
I cannot get thread profile to sweep. Im obviously doing something wrong, but dont know what. I figure I messed up
the thread profile sketch. Any tips?
9. Christopher
June 12th, 2009 at 11:36 pm
This is nice and all but its a bit incomplete, Im still very new and some of the steps were rushed
12. ITSL
November 17th, 2009 at 3:02 pm
ITSL RULEZ!
13. Shimba
March 26th, 2010 at 11:16 am
Hi, i just dont get step #7, or actually i dont understand what u have sketched and how to sketch something like that?
7 de 9
http://www.solidworkstutorials.com/2008/10/tutorial-5-create-12-hex-bolt/
The sweep op didnt work for me until I extended the sketch into the shaft area. It can be extended in any distance, as
long as it is not flush with the top of the shaft. If you mirror (copy) the sketch it works great. Hope that helps
16. jordan
September 20th, 2010 at 5:31 pm
17. Billy
September 21st, 2010 at 5:11 pm
Leave a Reply
Name (required)
Mail (will not be published) (required)
Website
Blog Sponsors
8 de 9
http://www.solidworkstutorials.com/2008/10/tutorial-5-create-12-hex-bolt/
Recent Posts
Learning SolidWorks 2011 Tutorial
Small DC motor tutorials (Part 3)
The Rolling Bridge, London
Small DC motor tutorials (Part 2)
Small DC motor tutorials (Part 1)
The unusual bug!
Customizing your keyboard
How to model car in SolidWorks step by step video!
Small DC motor tutorials
Challenge your design skill with kids game!
Plugin PhotoView 360 on your SolidWorks 2009
Close open sketch
Running SolidWorks on Mac
Scale down your SolidWorks part
How to change counter bore screw hole to counter sunk screw hole
How to use SolidWorks Toolbox
Skip Instances
I-Swarm Robot
How to model Audi R8 car in SolidWorks
Tutorial #22: How to create U bracket sheetmetal
Tutorial #21: Create simple sheetmetal bend
Confederate P120 Fighter Combat bike
Create potato chip with SolidWorks
The future of American Car by Colin Pan
Variable cut along curve
Lets blend iPhone
Show hidden SolidWorks tools
How technology control sex!
SolidWorks Tips: Make round fillet
Funny design, good for cardio
Tutorial #20: How to create USB head
9 de 9
http://www.solidworkstutorials.com/2008/10/tutorial-5-create-12-hex-bolt/