Professional Documents
Culture Documents
Machining of Arlon: Drilling Operations
Machining of Arlon: Drilling Operations
DRILLING OPERATIONS
Arlon 1000
Arlon 1160
400 (122)
250 400
(76 122)
o f
0.002 0.008
(0.051 0.2)
0.002 0.008
(0.051 0.2)
118
12
118
12
a r l o n
Operations
m a c h i n i n g
MACHINING OF ARLON
1000 (305)
400 500
(122 152)
0.016 (0.41)
5
6 12
0.30 (7.6)
0.008 (0.2)
5
6 12
0.25 (6.3)
REAMING OPERATIONS
Use spiral flute machine reamers where possible at speeds of
100 200 rpm for unfilled and glass-filled Arlon. The use of a
water coolant is advised.
Arlon can be very abrasive to high-speed drills particularly when
glass-filled grades are being machined. To minimize tool wear,
use carbide-tipped tools. Sharp corners should be worked with
MILLING OPERATIONS
d a t a
p r o d u c t
Unfilled
Arlon 1000
Turning Operations
Lip Angle
Clearance Angle
Arlon is impervious to most coolants and oils, but the use of such
Arlon, and speeds of 500 750 ft/min (152 229 m/min) can
be used with unfilled Arlon with plain water coolant for milling
holes or deep pockets. Carbide-tipped tools are recommended
2008, Greene, Tweed all rights reserved
All trademarks are property of their respective owners.
04/08-GT DS-US-PP-027
Contact Us
Greene, Tweed
PetroChem & Power
Houston, TX, USA
w w w. g t w e e d . c o m
Tel: +1.281.821.2094
Tel: +1.800.820.9005
Fax: +1.281.821.2696