Professional Documents
Culture Documents
Milling Parameters Milling steps Strategy Milling tool Diameter Number of teeth Radius [mm] Cutting speed (Vc) [m/min] Revolutions [1/min] Feedrate per tooth [mm] Feed rate (Vf) [mm/min] Cutting depth (ap) [mm] Cutting Width / Line spacing (ae) [mm] Processing [mm] 1. Roughing Z - constant 2. 3. 4. 5. Finishing flat areas 6. Finishing Z - constant 7. Finishing rest material shapes
EMZ90 EBG EBG EBG EBG EBG Airline SchaftV22.042TH050 V20.020AN140- R12.012AP120- R06.006AN100- V08.008AN100- R08.008AP100frser (1110569) (1043249) C-I (6130406) C-I (6130394) C (6132198) C (6130576) C (9148824) 42 3 3 650 5,000 0.42 6,300 5 30 20 2 4 650 10,400 0.42 8,800 2.5 10 12 2 6 600 15,900 0.2 6,400 2 2 6 2 3 250 13,300 0.2 5,300 0.5 0.5 8 2 1 400 16,000 0.15 4,800 0.3 4 8 2 4 400 16,000 0.15 4,800 0.15 0.3 4 2 2 200 16,000 0.15 4,800 0.1 0.1
The material must be acclimatised to 18 25 C prior to machining. Machining of the block is easily accomplished by sawing, milling and so on with high performance tools or by hand. Bonding areas must be clean, dry and free of dust and grease or oil. For bondings use e. g. Biresin Power Adhesive Thix (for more information see Product Data Sheet). For correction or finishing of surface use Biresin Spachtel wei (for more information see Product Data Sheet).