Professional Documents
Culture Documents
36/00
With post indicator plate and black/blue SDR 11 PE pipe ends, CTC
116
AVK gate valves are designed with built-in safety in every detail. The wedge is fully vulcanized with AVKs own
drinking water approved EPDM rubber compound. It features an outstanding durability due to the ability of the
rubber to regain its original shape, the double bonding vulcanization process and the sturdy wedge design.
The safety stem sealing system, the high strength stem and the thorough corrosion protection safeguard the
unmatched reliability.
Product Description:
Gate valve with post indicator flange and PE pipe ends for fire protection application to max. 20 C
Standards:
Designed according to EN 1074 part 1 & 2, Designed according to EN 1171
Test/Approvals:
Seat: 1.1 x PN (in Bar), Body: 1.5 x PN (in Bar).Operation torque test.
Features:
Fixed, integral wedge nut preventsvibration and ensuresdurability
Fully vulcanized wedge with guide rails, integrated wedge shoes and a large conical stem hole
Stainless steel stem with wedge stop and rolled threads for high strength
Stem sealing with an NBR wiper ring, two upper O-rings in a polyamide bearing, one lower O-ring and one
O-ring gland seal
RoundEPDM bonnet gasket fixed in a recess
Countersunk and sealed stainless steel bonnet bolts encircled by the bonnet gasket
Full bore
Low operating torque
Epoxy coating to DIN 30677-2 and AVK guidelines, RAL 5017
A standard PE pipe is pressed onto the grooved valve end, locked with a steel ring and sealed with a plastic
shrink hose. The boltless, full bore PE end connection is tensile resistant and stronger than the PE pipe itself.
The PE pipe end enables direct welding into PE pipes resulting in a fast and secure assembly.
Accessories:
Post indicator, wall post indicator, dedicated Supa Plus coupling/flange adaptor for PE/PVC, universal tensile
Supa Maxi coupling/flange adaptor
36/00
With post indicator plate and black/blue SDR 11 PE pipe ends, CTC
116
15
14
13
12
21
11
20
10
19
18
H3
17
16
6
5
4
3
2
1
L1
L
Component List:
1.
3.
5.
7.
9.
11.
13.
15.
17.
19.
21.
Pipe
Shrink hose
Wedge
Bonnet gasket
Bonnet
Stem collar
Bearing
Stem
Post indicator flange
Wrench nut
Hexagon bolt
PE
Plastic
Ductile iron with EPDM rubber
EPDM rubber
Ductile iron, min. GJS-400-15 (GGG-40)
Dezincification resistant brass
Polyamide
Stainless steel min. 15.5% Cr
Ductile iron, min. GJS-400-15 (GGG-40)
Grey cast iron, GJL-250
Stainless steel
2.
4.
6.
8.
10.
12.
14.
16.
18.
20.
Sleeve
Body
Wedge nut
Bonnet bolt
O-ring stem seal
O-ring
Wiper ring
O-ring
Hexagon bolt
Washer
Stainless steel
Ductile iron, min. GJS-400-15 (GGG-40)
Dezincification resistant brass
Stainless steel A2, sealed with hot melt
EPDM rubber
NBR rubber
NBR rubber
NBR rubber
Stainless steel
Stainless steel
Components may be substituted with equivalent or higher class materials without prior notification.
DN
mm
D
mm
Product
PN Class
H
mm
H3
mm
L
mm
L1
mm
Theoretical
weight kg
36-090-00-163
36-110-00-163
36-180-00-163
36-200-00-163
36-250-00-163
36-315-00-163
80
100
150
200
250
300
90
110
180
200
250
315
PN16
PN16
PN16
PN16
PN16
PN16
314
343
446
542
625
701
377
418
559
669
777
891
900
900
1100
1100
1350
1350
250
250
265
255
420
355
20
30
58
88
118
189
The designs, materials and specifications shown are subject to change without notice.
This is due to the continuous development of our product programme.
Version no. 36 - 10/3/2013 2:07 PM