Professional Documents
Culture Documents
3 Roll Plate Bending Machines
3 Roll Plate Bending Machines
PS 360
PS 310
PSS 700
PS 310
PS 500
PS 500
Single hydraulic
motor
Drop end
Portable control
Cone bending
Optional Equipment
ROUNDO PS machines are the best equipped and most versatile in
the industry, yet there are applications where the addition of options
such as material handling equipment, bar bending attachments, special top rolls, or special controls such as ROUNDOs exclusive PSR/
wCNC are called for. For those applications, we offer the following:
Interchangeable Top Roll
When rolling parts to diameters smaller than the standard top roll
will permit, an interchangeable top roll may be installed. This smaller
diameter top roll can be easily exchanged with the standard top roll,
further enhancing the machines versatility.
Interchangeable top rolls with special crowning or special machining
to accommodate unusual applications can also be installed.
Overhead and Side Supports
All PS machines can be equipped with hydraulically operated side
supports on one or both sides to support the material as it enters or
leaves the machine. An adjustable top support to support the material
from overhead helps reduce deformation of the rolled plate. These
supports can be ordered mounted on the machine when shipped
from the ROUNDO factory, or added later as requirements warrant.
This flexibility allows the machine to be equipped in a manner that
enhances efficiency, safety and productivity.
PS 460
PSS 960
Controls
PSR/wCNC control
Portable
control
console
Portable control
console with double
digital readouts
ROUNDO
3-Roll Plate Bending Machines
Type PSE and PSS
ROUNDO also produces a range of smaller
3-Roll machines, type PSE.
Type PSS is our range of massive capacity
3-Roll machines with separate hydraulic motors
and roll diameters up to 1000 mm (40).
Please contact us for detailed information.
205
230
255
280
310
340
360
390
460
500
550
600
205
230
255
280
310
340
360
390
460
500
550
600
205
230
255
280
310
340
360
390
460
500
550
600
205
230
255
280
310
340
360
420
460
500
550
600
205
255
310
340
360
420
460
500
550
600
Prebending
capacity
mm
1500 x 6
1500 x 8
1500 x 10
1500 x 12
1500 x 14
1500 x 20
1500 x 26
1500 x 32
1500 x 38
1500 x 45
1500 x 51
1500 x 66
2000 x 6
2000 x 8
2000 x 10
2000 x 12
2000 x 14
2000 x 18
2000 x 22
2000 x 28
2000 x 32
2000 x 40
2000 x 45
2000 x 53
2500 x 5
2500 x 6
2500 x 8
2500 x 10
2500 x 12
2500 x 15
2500 x 20
2500 x 25
2500 x 30
2500 x 35
2500 x 40
2500 x 50
3000 x 4
3000 x 5
3000 x 6
3000 x 8
3000 x 10
3000 x 12
3000 x 15
3000 x 20
3000 x 25
3000 x 30
3000 x 35
3000 x 45
3500 x 3
3500 x 5
3500 x 7
3500 x 10
3500 x 12
3500 x 16
3500 x 22
3500 x 27
3500 x 32
3500 x 40
Rolling capacity
down to bending diameter:
3 x top roll
mm
1500 x 10
1500 x 13
1500 x 16
1500 x 20
1500 x 23
1500 x 26
1500 x 30
1500 x 37
1500 x 46
1500 x 53
1500 x 68
1500 x 78
2000 x 9
2000 x 13
2000 x 15
2000 x 18
2000 x 20
2000 x 22
2000 x 28
2000 x 32
2000 x 41
2000 x 46
2000 x 60
2000 x 68
2500 x 8
2500 x 12
2500 x 14
2500 x 16
2500 x 18
2500 x 20
2500 x 26
2500 x 30
2500 x 36
2500 x 42
2500 x 53
2500 x 60
3000 x 7
3000 x 8
3000 x 11
3000 x 13
3000 x 16
3000 x 18
3000 x 22
3000 x 26
3000 x 33
3000 x 38
3000 x 48
3000 x 55
3500 x 5
3500 x 9
3500 x 12
3500 x 16
3500 x 20
3500 x 23
3500 x 31
3500 x 35
3500 x 45
3500 x 50
5 x top roll
mm
1500 x 12
1500 x 15
1500 x 18
1500 x 22
1500 x 25
1500 x 29
1500 x 34
1500 x 44
1500 x 54
1500 x 62
1500 x 80
1500 x 93
2000 x 11
2000 x 15
2000 x 17
2000 x 19
2000 x 22
2000 x 26
2000 x 33
2000 x 37
2000 x 48
2000 x 55
2000 x 70
2000 x 80
2500 x 10
2500 x 14
2500 x 15
2500 x 17
2500 x 20
2500 x 23
2500 x 30
2500 x 34
2500 x 43
2500 x 50
2500 x 62
2500 x 72
3000 x 8
3000 x 10
3000 x 12
3000 x 15
3000 x 18
3000 x 21
3000 x 27
3000 x 31
3000 x 40
3000 x 45
3000 x 57
3000 x 65
3500 x 6
3500 x 11
3500 x 15
3500 x 19
3500 x 25
3500 x 28
3500 x 36
3500 x 42
3500 x 52
3500 x 60
Diameter
of top roll
3000 - 5000 mm
mm
1500 x 14
1500 x 17
1500 x 19
1500 x 23
1500 x 27
1500 x 32
1500 x 38
1500 x 46
1500 x 56
1500 x 65
1500 x 85
1500 x 96
2000 x 13
2000 x 17
2000 x 18
2000 x 20
2000 x 24
2000 x 28
2000 x 35
2000 x 40
2000 x 51
2000 x 57
2000 x 73
2000 x 83
2500 x 11
2500 x 16
2500 x 17
2500 x 18
2500 x 22
2500 x 25
2500 x 33
2500 x 36
2500 x 45
2500 x 52
2500 x 65
2500 x 74
3000 x 10
3000 x 11
3000 x 14
3000 x 16
3000 x 19
3000 x 23
3000 x 30
3000 x 33
3000 x 41
3000 x 47
3000 x 59
3000 x 67
3500 x 8
3500 x 12
3500 x 17
3500 x 20
3500 x 28
3500 x 30
3500 x 38
3500 x 44
3500 x 55
3500 x 62
mm
205
230
255
280
310
340
360
390
460
500
550
600
205
230
255
280
310
340
360
390
460
500
550
600
205
230
255
280
310
340
360
390
460
500
550
600
205
230
255
280
310
340
360
420
460
500
550
600
205
255
310
340
360
420
460
500
550
600
ITR Min.
1)
mm
140
180
170
190
220
240
260
300
370
420
460
500
140
180
170
190
220
240
260
300
370
420
460
500
140
180
170
190
220
240
260
300
370
420
460
500
140
180
170
190
220
240
260
270
370
420
460
500
140
170
220
240
260
270
370
420
460
500
Motor
kW
4
5,5
5,5
7,5
11
22
22
30
37
50
60
75
4
5,5
5,5
7,5
11
22
22
30
37
50
60
75
4
5,5
5,5
7,5
11
22
22
30
37
50
60
75
4
5,5
5,5
7,5
11
22
22
30
37
50
60
75
4
5,5
11
22
22
30
37
50
60
75
Net weight
Gross weight
2)
2)
tons
3,2
4,6
4,9
6,3
6,8
11,1
12,3
14,4
24,0
29,8
35,0
42,0
3,5
5,1
5,6
7,1
7,8
12,2
13,5
16,0
26,0
32,2
38,0
45,6
4,1
5,7
6,2
7,9
9,8
13,3
14,8
17,8
28,0
34,6
41,6
49,0
4,5
6,2
7,0
8,7
10,8
14,5
16,3
19,5
30,0
37,0
45,0
52,5
5,0
7,7
11,8
15,6
17,6
21,2
32,0
39,4
48,5
56,0
tons
3,6
5,1
5,4
6,9
7,4
11,8
13,1
15,3
25,2
31,3
36,8
44,0
4,0
5,7
6,1
7,7
8,4
12,9
14,3
17,0
27,3
33,8
40,0
47,8
4,6
6,3
6,8
8,6
10,5
14,1
15,7
19,0
29,4
36,3
43,8
51,3
5,1
6,9
7,7
9,4
11,5
15,3
17,2
20,7
31,5
38,8
47,3
55,0
5,7
8,4
12,6
16,5
18,6
22,6
33,6
41,3
51,0
58,7
The capacities are based on normal steel with yield point 270 N/mm2
any diameter between the min. diameter in the table and the standard top
The minimum bending diameter is 1,1 1,4 x the top roll diameter
roll.
PASS 255
4-Roll Plate Bending Machines
The standard range of 4-roll plate bending
machines covers plate thicknesses of
3-100 mm (1/8 to 4) and widths of
1 000-8 000 mm (3 to 26).
PM-1
Quick Rolling Machines
Plate bending machines for large production
runs of cylinders with cycle times as short
as 10 seconds. For plate thicknesses up
to 12 mm (1/2) and widths up to about
2 000 mm (6).
R-4-S
R-16-S
PRH-310
SF-2
Flanging and Punching Machines
For flanging and punching cylinders in
the same operation. Cylinder diameters
of 350-3 000 mm (14 to 120) and plate
thicknesses up to 8 mm (5/16).
ROUNDO also produces: Beambenders, beading and joggling machines, welding positioners and other customized machines.
www.roundo.com
Roundo AB
Box 171
SE-281 22 Hssleholm
Sweden
Tel: +46 451 422 00
Fax: +46 451 824 04
info@roundo.com