Professional Documents
Culture Documents
123592885
122153555
122147666
122147537
120975871
119132767
118541672
117744355
116385575
116384150
115390691
113799202
113368926
112789899
112767077
111089309
Equipment/Part
Aespire 7900 -- Aespire 7900 - Drive gas check valve -- The pressure waveform
looked unusual and sometimes, the bellow cannot drive --
HCMC
Engstrom Pro -- Power Management Board (PMB) -- The machine have the nonsilenceable sound when turn on and the screen did not display. -Valve Flow Control 160 LPM -- Check out, FCV calibration failed --
HN
HN
Engstrom Pro -- Valve Flow Control 160 LPM -- Check out, FCV calibration failed -- HN
Engstrom Pro -- Speaker assembly - Engstrom Pro -- Alarm: "*NOTE: Alarm
speaker not detected. Check connection." --
HN
Aespire 7100 -- AnesSwitch, system On/Standby, Kit -- when the system switch in
on position, it still Stops O2 and Air to the flowhead , only electrical system
working -HCMC
Incubator CP2000 - Control Board -- E002 error, ADC calibration failure -Incubator CP2000 - Control Board -- Air Temp display 50 oC -Speaker assembly - Engstrom Carestation -- Alarm: "*NOTE: Alarm speaker not
detected. Check connection." -Cover lock, Absorber Canister -- Cover lock breaks --
HN
HN
HN
HN
FRU, CPU Board w/o uDOM, B650 -- Some menus are deactivated,The screen only
display menu and time -HN
Respiratory valve assembly -- noisy respiratory valve over 60dB -HCMC
FRU, uDOM w. CARESCAPE Monitor B650 v1.1.12 SW -- Some menus are
deactivated,The screen only display menu and time -HPDU board -- Display unit error --
HN
HN
Aespire 7100 -- Switch, system On/Standby, Kit -- The machine cannot be turned
on --
HN
Incubator Careplus 2000 -- Switch panel assembly kit Care Plus 2000 -- "Increase
key" is stuck (shorted) -HN