Professional Documents
Culture Documents
Answer To Lab No-01 Q.No.01: Ans
Answer To Lab No-01 Q.No.01: Ans
Q.No.01:
Ans
Q.No.02:
Ans:
Q.No.03:
Ans:
Q.No.04:
Ans
What is the value of the reflection coefficient, from your observation of the
reflected pulse?
The reflection coefficient is
(Reflected signal)
(Incident signal)
Q.No.02:
Ans:
(i)-------(200 600)
(200 + 600)
400
800
(ii)
(1800 600)
(1800 + 600)
400
800
1/2
Q.No.02:
What will be the effect on transmission line when load is zero or infinity?
Ans:
All the power reaching the end of the line is reflected back toward the source.
Q.No.01:
Ans
10.425GHz
Q.No.02:
Ans
Q.No.03:
Ans
These are basically resistors, named resistive vane central slot type and are
used to set attenuation level and control power transmission in waveguide.
Max. Attenuation is at vane setting 0 approx 36db, minimum at 90,
less than 1db.
Q.No.04:
Ans
Q.No.01:
Ans
Q.No.02:
Ans
28.3mm
Q.No.03:
How many modes the cavity supports and write the names as well?
Ans
Q.No.04:
Ans
Linear.
Q.No.01:
What will be the VSWR(s) with resistive load if Imax is 4.8mA and Imin is
2.4mA.
Ans:
Q.No.02:
What will be the VSWR(s) with horn antenna load if Imax is 4.2mA and Imin
is 3.0mA.
Ans:
Q.No.03:
Ans:
Resistive load because it has greater VSWR than horn antenna load.