Professional Documents
Culture Documents
Page 1 of 18
NOTE: The measurements within this text and 2D documentation are given both in milimeters and
inches (in brackets). This website is based on ISO measurement unit system, which is the international
standard. I apologize to the people who use other measurement units; but I believe that measurements
given in milimeters and inches should be adequate for everyone who would like to build this project.
Besides that, on todays Internet it is easy to purchase the ruler containing all the measurement
units and overcome the difficulties of any kind.
Make the components as given on drawings.
Parts List
Page 2 of 18
2D Documentation
Page 3 of 18
Page 4 of 18
Page 5 of 18
Page 6 of 18
Page 7 of 18
Assemblage Instructions
1. Use screws to fix the Lower Crossbar (item 3) to Front legs (items 1)
Page 8 of 18
2. Use screws to fix the Upper Crossbar (item 2) to Front legs (items 1).
Page 9 of 18
Page 10 of 18
Page 11 of 18
3. Use screws to fix Hinge (item 5) to the Upper Crossbar (item 2) by the middle. You can use various
types of hinges, which have standard assembly and can be found in many shops.
Page 12 of 18
Page 13 of 18
4. Use bolts to fix the other end of Hinge (item 5) to the upper end of the Back Leg (item 7).
Page 14 of 18
5. Use Fastener to fix the Movable crossbar (item 8) at the height by your choice. You can drill the bolt
holes in diameter 8,5mm (0,33 inches) at heights by your choice.
Page 15 of 18
Page 16 of 18
6. Fix one part Screw Hook (item 11) to the Front Leg (item 1) and the other part to the Back Leg
(item 7).
Page 17 of 18
7. Set the leaning of an easel that suits to your needs and then measure the proper length of chain. Cut
15-20 cm longer chain, so you could regulate the leaning of an easel.
Page 18 of 18