Professional Documents
Culture Documents
Linear Analysis Using The LTI Viewer - MATLAB & Simulink
Linear Analysis Using The LTI Viewer - MATLAB & Simulink
Before you can perform the analysis, you must have already created linear models in the MATLAB workspace.
For information on how to create a model, see Basic Models.
To perform linear analysis:
1. Open the LTI Viewer showing one or more models using the following syntax:
ltiview(model1,model2,...,modelN)
By default, this syntax opens a step response plot of your models, as shown in the following figure.
3. To view a different type of response on a plot, right-click and select a plot type.
4. Analyze system performance. For example, you can analyze the peak response in the Bode plot and
settling time in the step response plot.
a. Right-click to select performance characteristics.
b. Click on the dot that appears to view the characteristic value.